FLUKE 2052R Wire Tracer Receiver Instruction Manual

FLUKE 2052R Wire Tracer Receiver

Product Information
The 2052R/2062R Wire Tracer Receiver is a device used for tracing and locating wires. It is designed to work in conjunction with the 2000T Wire Tracer Transmitter. The receiver is equipped with a Smart SensorTM (2062R) that enhances wire detection capabilities. The transmitter sends signals that can be detected by the receiver, allowing users to trace wires accurately.

Product Usage Instructions

1. Ensure that the 2000T Wire Tracer Transmitter is turned on and functioning properly.
2. Hold the 2052R/2062R Wire Tracer Receiver in your hand, with the sensor facing toward the area where you want to trace wires.
3. Move the receiver slowly and steadily along the suspected wire path.
4. Observe the receiver’s display screen or indicator lights for any changes or signals.
5. If the receiver detects a wire signal, it will provide visual or audible indications, such as a change in display readings or LED lights.
6. Continue moving the receiver along the wire path until the signal becomes stronger or more consistent.
7. Use the receiver’s sensitivity adjustment feature to optimize the detection based on the wire’s distance or signal strength.
8. If necessary, use additional tools like the J (2052R) tip sensor or breaker (2062R) to further narrow down the wire location.
9. Once the wire is successfully traced, mark or note its location for future reference.
10. After usage, turn off both the transmitter and receiver to conserve battery power.

Note : For enhanced wire detection capabilities, use the Smart SensorTM (2062R) on the 2062R Wire Tracer Receiver. The sensor can provide more accurate and reliable wire-tracing results.

INSTALLATION

HOW TO FIX

References

• Fluke Corporation: Fluke Electronics, Calibration and Networks

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>