IKEA HAVSJON Pillar Tap Instruction Manual
- October 30, 2023
- Ikea
Table of Contents
IKEA HAVSJON Pillar Tap
Product Information
The product is a tap/mixer that needs to be installed in compliance with local construction and plumbing regulations. It comes with high and low-pressure settings, and a pre-fitted high-pressure nozzle. The product requires installation by a professional if the user is unsure about the regulations.
Product Usage Instructions
- Before installation, ensure that the installation is compliant with local construction and plumbing regulations.
- If unsure, contact a professional for installation.
- Switch off the main shut-off valve before changing the tap.
- After installation, unscrew the Aerator/Flow Guide and allow the water to run freely for a few minutes.
- Screw the Aerator/Flow Guide back in place tightly to prevent removal by hand.
Installation must be performed in compliance with current local construction and plumbing regulations. If in doubt, contact a professional
caution
Switch off main shut-off valve before changing tap.
NEED HELP
WHATS IN THE BOX
INSTALLATION INSTRUCTIONS
CAUTION
Before use : Unscrew the Aerator/Flow Guide and allow the water to run freely for a few minutes. Then screw the Aerator/Flow Guide back in place. Ensure that it is tight to prevent removal by hand.
CAUTION
Check at regular intervals to make sure that the installation is not
leaking.
OVERVIEW
© Inter IKEA Systems B.V. 2020 2022-10-28 AA-2229936-5