INTOUCH KIO215VRT 21.5-Inch Touch Screen Kiosk User Manual
- June 5, 2024
- InTouch
Table of Contents
INTOUCH KIO215VRT 21.5-Inch Touch Screen Kiosk
SPECIFICATIONS
- Touch Screen INOF215
- 21.5” active viewable area
- 10-point PCAP multi-touch
- VGA & HDMI input
- 1920 x 1080 Native Resolution
- Printer Citizen CL-S400DT (Alternate Devices Available)
- Direct thermal printing
- Industrial Auto-Cutter
- Max. print width 104mm
- Max. print length 812mm Two cutting modes – backfeed & cut through
- Scanner Datalogic Gryphon GFS4400 (Alternate Devices Available)
- Reads 1D & 2D barcodes
- Wide angle field-of-view
- Reads QR Codes
- Programmable for “Always On” or “Object Sense” mode
- Camera Logitech C922 Pro-stream Webcam\
- Full HD 1080p at 30fps
- Hyperfast frame rate in HD
- Video capture capabilities
- 78° Field of view
- Speaker Lenovo Soundbar
- USB delivered audio and power
- Dual Speaker support with 1.25+1.25 total watts of output
- Stylish and sleek design
INTERNAL ACCESS
CABLING INFORMATION
Step 1. Connect your desired display cable. (HDMI Recommended) (VGA option may
not be included)
Step 2. Connect all USB devices.
Step 3. Connect your PC power cable into the powerboard.
SECURING YOUR KIOSK TO THE FLOOR (OPTIONAL)
CLEANING INSTRUCTIONS
Applicable to touch screens and kiosks:
InTouch suggests using an isopropyl alcohol spray and clean microfibre cloth.
Caution: Be careful when cleaning your kiosk to avoid vinyled graphic areas so
as not to damage the artwork. DO NOT use abrasive cleaners, solvents or
cloths.
For more information please visit www.intouchscreens.com.au/cleaning
WARRANTY
For more information please visit www.intouchscreens.com.au/warranty
FOR MORE INFORMATION
Telephone 02 9939 6251
support@intouchscreens.com.au
sales@intouchscreens.com.au
www.intouchscreens.com.au
References
- Touch Screen Monitor & Kiosk Solutions in Australia
- Cleaning your Touch Screen | InTouch Screens
- Warranty | InTouch Screens