FLUKE TruTest Data Management Software User Guide
- June 4, 2024
- FLUKE
Table of Contents
Data Management Software
User Guide
Introduction to TruTest™
TruTest™ Data Management Software (the Software) is a new generation of software for managing electrical system testing data. The Software supports data from Fluke DMS software or from Beha-Amprobe ES Control software and these databases can be automatically converted. The software supports these instruments:
- Fluke 6500
- Fluke 6500-2
- Beha-Amprobe GT-600
- Beha-Amprobe GT-650
- Beha-Amprobe GT-800
- Beha-Amprobe GT-900
The Software uses a hierarchical tree topology to represent clients, sites,
locations, and appliances. Each element is presented as a single tree node.
Each node property is presented after selection. You can maintain the tree
topology using these functions: add a node, delete a node, duplicate node,
duplicate subtree, and node edit.
The Software makes sure that measurement data:
- Is collected from instruments or from files transferred from instruments
- Can be manually added
- Is automatically assigned to hierarchical tree topology
- Is represented in the form of printable certificates (designed in accordance with national standards) and reports
Note: Some parts of the program can be changed without notice in newer software versions, and therefore, might differ from the information in this manual.
Safety Information
This software does not contain any safety-related content.
How to Contact Fluke
Fluke Corporation operates worldwide. For local contact information, go to our
website: www.fluke.com.
To view, print, or download the latest manual or manual supplement, go to our
website. To register your product, visit http://fluke.com/register.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
+1-425-446-5500
info@fluke.com
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
+49 7684 8009 545
techsupport.dach@fluke.com
Software Installation
| Type | System Requirements |
|---|---|
| Operating System | ● Windows 10, 64-bit and 32-bit (recommended) |
● Windows 8/8.1, 64-bit and 32-bit
● Windows 7 with Service Pack 1, 64-bit and 32-bit
System Memory| ● Minimum 4 GB RAM (64-bit) or 2 gigabytes (GB) RAM (32-bit)
Hard Disk Space| ● Minimum 2 GB available hard disk space
Display Resolution| ● Minimum screen resolution 1366 x 768
Communication Interfaces| ● USB
The Software is built with .NET Framework. You may use .NET Framework 4.6.1 or
newer: https://dotnet.microsoft.com/download/dotnet-framework/net461.
To convert existing databases from ES Control and DMS, see the Users Manual.
Software Installation Procedure
-
Choose an installation file to download: fluke.com/trutestsoftwarebeha-amprobe.com/software
Note: Prior to the installation starting, close all running programs. -
Use file explorer to browse the installation file. Double-click the.exe file.
-
Follow the installation instructions displayed on the screen.
-
Start the Software.
The License wizard starts. -
Click Activate your license.
-
Choose how to activate the license.
● Activate Online if you are connected to the Internet
● Activate Offline if you are not connected to the Internet. -
Enter the Activation key.
-
Click Activate license key.
For more details, see the section Activate the License in the Users Manual.
PN 5269432 November 2020
© 2020 Fluke Corporation. All rights reserved.
Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
References
- Software | Beha-Amprobe
- Fluke Registration
- Fluke TruTest™ Softwaredownloads | Fluke
- Fluke Corporation: Fluke Electronics, Calibration and Networks
- Download .NET Framework 4.6.1 | Free official downloads
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>