Landi 57654 Paper Shredder User Manual

Landi 57654 Paper Shredder

Product Information

Technical Characteristics

• 3-Position slide switch for AUTO, OFF, and REV.
• Paper entry: Put paper into this entry to shred.
• Handle

Description of the Device

The paper shredder is a device designed to shred paper. It features a slide switch for different modes, a paper entry for inserting paper to be shredded, and a handle for easy transportation.

Product Usage Instructions

Installation

1. Place the paper collection tray on a flat, stable surface.
2. Place the motor unit on the paper collection tray and ensure it is securely in place, making sure to hear a slight click. Note: The unit is equipped with a safety system that prevents operation if the motor unit is not properly seated on the paper collection tray.
3. Plug the device into an easily accessible power outlet.

Usage

Important: This unit is designed for periods of operation that should not exceed 2 minutes. Do not use the shredder extensively. After using the device for 2 minutes, wait 40 minutes before using it again.

Follow these steps to use the paper shredder:

1. Ensure the device is properly installed and plugged into a power outlet.
2. Set the slide switch to the desired mode (AUTO, OFF, or REV).
3. Insert up to 6 sheets of paper into the paper entry. Avoid inserting paper clips or staples.
4. Wait for the shredding process to complete.
5. If abnormalities occur during use, refer to the troubleshooting guide in the user manual.

Abnormalities and Elbow Disorders in Use

1. Cut off the power and empty the wastebasket.
2. Cut off the power and press the scrapped paper down to move
   them away from the machine head.

2| The paper feeding or forward rotation is normal, but there is
still scrapped paper in the wastebasket.| The slots of the blades hold the scrapped paper.| Set the slide switch to REV (if needed, clean the scrapped
paper at the exit).
3| The paper withdrawal does not work.| Inductive paper device does not function.| Adapt to the position of the feeding paper and make it touch
the automatic inductive device.
4| Paper is stuck in the protection measures.| The rotor is locked.| Remove the paper from the protection measures.
5| The number of sheets causes automatic protection.| Sheet of paper or automatic feeding does not work.| Remove a sheet of paper or unlock the automatic feeding.

Special Precautions

• Read the safety instructions carefully before operating the machine to avoid damage.
• The product is not intended for use by children and should not be treated as a toy.
• Avoid hair and hands touching the document feed opening.
• Do not insert paper clips or staples into the infeed slot.
• Avoid clothing, long necklaces, or bracelets touching the document feed opening.
• Keep aerosol products away if the product incorporates a universal motor.

Waste Electrical and Electronic Equipment Collection

This product falls under the category of Waste Electrical and Electronic Equipment (WEEE). Please dispose of this product in accordance with your local regulations for the collection and recycling of WEEE.

SAFETY INSTRUCTIONS

Please read these instructions carefully before using the device and keep them for future reference.

1. This appliance has been designed for home use only. Any other use is excluded.

2. Do not use outdoors.

3. This appliance should not be used by unattended children. Make sure that children do not play with the device.

4. Before connecting your appliance, make sure that the voltage of your home matches that indicated on the appliance rating plate.

5. Do not allow liquids to enter the unit or expose it to rain, moisture or splashing water.

6. Keep the unit away from sources of heat.

7. Never immerse the appliance, the power cable or the plug in water or any other liquid.

8. When disconnecting the cable, always pull it at the plug, do not pull on the cable itself.

9. Never leave the appliance unattended while it is plugged in.

10. Do not use the device:

11. if the plug or power cable is damaged,

12. in case of malfunction,

13. if the device fell into the water,

14. if the device has been damaged in any way.
    Present it to an after-sales service center where it will be inspected and repaired. Never attempt to disassemble or repair the device yourself.

15. If the power cord is damaged, it must be replaced by your dealer, after-sales service or a similarly qualified person to avoid a hazard.

16. Make sure there is enough space between the shredder and any nearby objects.

17. When cleaning the unit, use only a soft, lint-free cloth (dry or slightly moistened). Do not use aerosol cleaners such as dust removers. Do not spray anything on the shredder.

Special precautions

• Do not bring your hands or fingers near the entrance opening. You could hurt yourself seriously. Keep away from openings: Do not get caught by a sleeve, hair, necklace, bracelet, tie or other objects, you may be hurt.
• Before introducing paper, remove the paper clips and staples.
• This device is not a toy. Avoid having children or pets near the machine.
• When not using the shredder, set the switch to the “OFF” position.
• Always connect the unit to an easily accessible AC outlet.
• Do not destroy documents more than 2 minutes in a row. Observe a break of at least 40 minutes after a long continuous use.
• Do not move the device during operation.
• Empty the container (s) frequently. Otherwise, the cutting unit may become clogged.
• Do not destroy envelopes, labels, or other papers with glue or other sticky substances as this may cause a paper jam.
• Do not touch the cutting blades exposed beneath the engine block.

SAFETY SYMBOLS

Warning : Please pay more attention to the safety instruction , before operate the machine otherwise wrong operation will result in danage to users.

• Product is not intended for use by children (product is not a toy)
• Avoid touching the document feed opening with hands.
• Avoid clothing and long necklaces or bracelets touching the document feed opening
• Avoid hair touching the document feed opening.
• Do not insert paper clips or staples into the infeed slot.
• Keep aerosol products away (for products incorporating a universal (brush ) motor.

TECHNICAL CHARACTERISTICS

• Reference 57654
• Power supply: AC 230V, 50Hz, 0.9A
• Width of paper: 220 mm
• Cutting type: Strip cut.
• Capacity of paper shredder: 6 A4 sheets – 80g / m²
• Maximum continuous operation: 2 minutes – Pause: 40 minutes. Weight: 1.2 kg

DESCRIPTION OF THE DEVICE

1. 3-Position slide switch for AUTO, OFF and REV.

2. Paper entry:
   Put paper into this entry to shred.

3. Handle

INSTALLATION

1. Place the paper collection tray on a flat, stable surface.
2. Place the motor unit on the paper collection tray and make sure it is securely in place: you must hear a slight click. Note: The unit is equipped with a safety system that prevents the unit from operating if the motor unit is not properly seated on the paper collection tray.
3. Plug the device into an easily accessible power outlet.

USE

The on / off switch is located on the top of the unit. It has three 3 positions:

1. “ON” position: Destruction starts automatically as soon as you insert paper into the corresponding entry.
2. “OFF” position: the destroyer is stopped. For safety reasons, we recommend leaving the unit in this position when it is unattended or not in use. Also remove the plug from the outlet.
3. “REV” Position: Use this position to return the document to you. The direction of destruction is reversed before the end of the work cycle to release the cutting blades. If you find that you have introduced too much paper and the destruction slows down significantly, place the switch in this position immediately. Do the same if you entered paper by mistake.
   As soon as it has finished destroying the document, the destructor stops automatically.

IMPORTANT : This unit is only designed for periods of operation that should not exceed 2 minutes. Do not use the shredder extensively. After using the device for 2 minutes, wait 40 minutes before using the shredder again.6 sheets maximum
Abnormalities and elbow disorders in use

scrapped paper in the wastebasket, so that the just scrapped paper cannot fall and leave in the entry.| 3. Cut off the power, and empty the wastebasket.

4. Cut off the power, and press the scrapped paper down to make them away from the machine head.

2| Paper feed or positive rotation is normal, but there are still some scrapped paper hanging at the exit after finishing.| The slots of the blades clamp the scrapped paper.| Set the slide switch to “REV” (if need, please clean the scrapped paper at the exit).
3| It can’t work if feeding paper follows withdrawing paper.| Some scrapped paper lock automatic inductive device.| Set the slide switch to “REV”.
4| Some paper is in the entry, but shredder does not work.| After feeding paper, any corner of the paper is inserted, but the rest doesn’t touch automatic inductive device.| Adapt to the position of the feeding paper and make it touch the automatic inductive device.
5| The paper is jammed, and the machine stops rotating.| 1.   The number of the inserted paper is too larger than the limitation

2.   Locked rotor makes the motor overheated and then temperature protection set takes action.

| 1. Set the slide switch to “REV” and withdraw the shredding paper.

2. Unplug the plug and let the machine stop for a while.

6| The machine doesn’t start after inserting a sheet of paper, or stop running when paper is being inserted.| The paper is too thin, too soft, humid, or too crinkly to activate automatic inductive device.| 1. Fold the paper and then insert it.

2. Set the slide switch to “REV”.

SELECTIVE COLLECTION OF ELECTRICAL AND ELECTRONIC WASTE

Electrical products should not be disposed of with household products. According to European Directive 2012/19 / EU for the disposal of electrical and electronic equipment and its execution under national law, used electrical products must be collected separately and placed in the collection points provided for this purpose. Contact the local authorities or your dealer for recycling advice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>