LANDI 55154 Table Lamp LED Deluxe Instruction Manual

: June 9, 2024
: LANDI

Table of Contents

Mounting Instruction
Assembly
Technical data
Manufactured for
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LANDI 55154 Table Lamp LED Deluxe Instruction Manual

Mounting Instruction

Safety directions / Please read this information carefully before installing or using this product. Please keep this user manual for further reference

The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
Maintenance of the lights is limited to the surfaces. When doing this, no moisture must come into contact with any areas of the terminal connections or mains voltage control parts.
Do not use any solvents, petrol or the like. The product would be damaged. Use only a dry, lint-free cloth for cleaning.
The light has a protection rating of IP20 and is solely intended for indoor use in private households.
The symbol of the crossed-out garbage can on the product or the packaging means that the product must not be disposed with ordinary household waste. At the end of its useful life, the product must be returned to a point of acceptance for the recycling of electric and electronic device. Please ask your local municipality for the point of acceptance.
Make sure that no cables get damaged during the installation work.
Place the lamp on horizontal surfaces only.
The power supply conforms to protection class II and therefore must not be connected to protective grounding.
The lamp shall only be used with the enclosed power supply (model no. MY12W-HPV1.0-A1).
LED colour deviation when using different chargers may occur. The light colour and luminous strength of the LED’s can also change as a result of lamp life span level.
Never look directly or indirectly into the LED light, as the high luminosity may be cause damage to the eyes.
This lamp is not suitable for dimmers and electronic switches.
The lamp may only be dimmed and switched in the corresponding designated areas on the product.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
The operating device (transformer, LED driver, ballast, control unit, etc.) may be replaced by the end user.

Assembly

The product comes already fully assembled. Position the light near a power outlet and on a horizontal surface. Connect the power adapter to the lamp. Then plug the mains plug into a properly installed socket. Your light is now ready to use.

Operation and functions
The product is equipped with touch sensitive control switches on the base.
The button “( I )“ switches the light on and off.
The button “ “ switches the color temperature of the luminaire from cold white to warm white in 5 steps (3000K-3500K-4000K-5000K-6500K).
By using the touch bar you can adjust the brightness of the light.

USB devices, such as smartphones, can be charged using the USB port (5V, 1A).Use an USB cable to connect your device to the USB socket of the table lamp.