INSIGNIA NS-GSMPK Protection Kit for Nintendo Switch Lite User Guide

INSIGNIA NS-GSMPK Protection Kit for Nintendo Switch Lite

Package Contents:

1. Screen Protector
2. Wet Cloth
3. Dry Cloth
4. Dust Absorber
5. Guide Stickers
6. Features:

Provides protection for your Nintendo Switch Lite screen
Helps prevent scratches and damage
Easy to install and remove

Attaching Your Screen Protector:

1. Remove your Switch’s silicone grip (if needed).
2. To prevent bubbles, clean your Switch’s screen with the wet cloth (1), then remove moisture with the dry cloth (2).
3. Press the dust absorber to your Switch’s screen repeatedly to clean any remaining debris.
4. Stick the two guide stickers onto the lower left and upper right corners of the screen protector.
5. Use tab 1 to peel the back film off the screen protector, then discard the film.
6. Use the two guide stickers to align the screen protector with the edge of your screen, then press it down from left to right toadhere. If the screen protector is not aligned correctly, firmly push the screen protector with your fingers to slide it into place.
7. If there are bubbles, press them out toward the edges of the screen protector.
8. Remove the guide stickers, then reattach your Switch’s silicone grip (if needed).

One-Year Limited Warranty:

For warranty details, visit www.insigniaproducts.com

Contact Insignia:

For customer service, call 877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico). Visit www.insigniaproducts.com

PACKAGE CONTENTS

• Glass protector
• Carrying case
• Silicone grip
• Dust absorber
• Dry cloth
• Wet cloth
• Guide stickers (2)
• Quick Setup Guide

Before using your new product, please read these instructions to prevent any damage.

FEATURES

• Impact-resistant glass screen protector with a 9H hardness rating protects your screen from scratches
• The silicone grip gives you access to all buttons and ports while protecting against damage
• Zippered carrying case includes a handle for easy transport
• The accessories pocket stores your earbuds, charging cables, and adapters
• The carrying case flap holds your game cards in place
• The extra large case fits your Switch Lite with the silicone grip attached

ATTACHING YOUR SCREEN PROTECTOR

1. Remove your Switch’s silicone grip (if needed).
2. To prevent bubbles, clean your Switch’s screen with the wet cloth (1), then remove moisture with the dry cloth (2).
3. Press the dust absorber to your Switch’s screen repeatedly to clean any remaining debris
4. Stick the two guide stickers onto the lower left and upper right corners of the screen protector.
5. Use tab 1 to peel the back film off the screen protector, then discard the film.
6. Use the two guide stickers to align the screen protector with the edge of your screen, then press it down from left to right to adhere. If the screen protector is not aligned correctly, firmly push the screen protector with your fingers to slide it into place.
7. If there are bubbles, press them out toward the edges of the screen protector.
8. Remove the guide stickers, then reattach your Switch’s silicone grip (if needed).

WARRANTY

ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:
For customer service, call 877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2019 Best Buy. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>