STAIRVILLE 270449 Foam-Snow Fluid Concent Instructions
- June 13, 2024
- STAIRVILLE
Table of Contents
STAIRVILLE 270449 Foam-Snow Fluid Concent
Product Information
- Product Name: Foam/Snow Fluid Concentrate
- Document ID: 270449_270450_18.07.2023
Product Usage Instructions
- Dilution: This foam/snow fluid concentrate needs to be diluted before use. The recommended ratio is 1 part concentrate to 4 parts water. For example, if you have 1 liter of concentrate, add 4 liters of water to achieve the desired mixture.
- Mixing : To create the diluted solution, pour the required amount of concentrate into a container. Then add the appropriate amount of water gradually while stirring continuously. Ensure that the solution is well-mixed before use.
- Application: Once the diluted solution is prepared, it can be used in foam or snow machines. Pour the solution into the machine’s reservoir or container, following the manufacturer’s instructions.
- Machine Settings: Adjust the machine settings according to your desired foam or snow output. Refer to the machine’s user manual for specific settings and adjustments.
- Operation : Turn on the foam or snow machine and let it run for a few minutes to establish a consistent output. Monitor the machine during operation to ensure proper functioning.
- Clean-up: After use, flush the machine with clean water to remove any residue. Follow the cleaning instructions provided by the machine manufacturer.
- Storage: Store the foam/snow fluid concentrate in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the container is tightly sealed to prevent leakage or evaporation.
Application instructions
-
Professional foam/snow fluid concentrate for the creation of short-term, artificial foam and snow effects in the event industry, theatre and film production.
-
The products are non-hazardous preparations according to the EU Directive 1907/2006 (REACH).
-
It is also non-hazardous in accordance with the national and international transportation regulations for land, sea and air transport.
-
The contained raw materials are the purest available.
-
The foam-active substances contained are biodegradable in accordance with the requirements of the Tenside Ordinance (TensV) to the German Detergents and Cleaning Agents Act.
-
The containers used are made of first-class PE of the highest quality and can be recycled after they have been completely emptied.
-
he product must be used appropriately and in delivery condition.
-
Store the product frost-proof at between 10° C and 30° C.
-
The event locations regulations (VStättV) or the corresponding legislations must be observed.
-
Depending on the local conditions, pre-dilute the product in a ratio of 1:100 to 4:100 (concentrate : water) and then foam over the machine.
-
In particular, the foam height must be selected according to the height of the people in the room.
The foam height must not exceed hip height. -
The foam height must be dosed to ensure that the exits and emergency exits in closed rooms are always visible.
-
The same applies to the escape routes lighting and markings, staircases, shafts, slab edges etc. The visibility of 25 m (max. distance from the next exit acc. to VStättV) must be observed.
-
Breathing is not possible within the foam!
-
To prevent anxiety, foamed rooms must never be locked.
-
Slippery deposits can form during use, especially on slippery floors.
-
After application, the residual foam solution can be disposed of via the public sewage system.
-
According to VStättV, only experienced, reliable adults are allowed to operate and maintain technical installations.
-
Every foamed room must be monitored by instructed persons.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>