SHARP 42EE2K 42 Inch FULL HD SMART TV User Guide

SHARP 42EE2K 42 Inch FULL HD SMART TV

Setting up the TV set for the fi rst time

1. Fitting the stand
   TV panel must be facing downwards.
   For the stand installation, there is one type of screw provided as shown below.
   Note: To complete the stand installation you will require a cross head screw driver.

Used for attaching the stand to the TV set (fi g.2)

1. Place the TV set on a fl at and clean surface with the panel facing downwards to avoid damage.
2. When the stand feet are installed correctly the stand feet will be longest at the front of the TV and shortest at the back with the feet pointing away from each other.
3. When the stand/feet are in the correct position, secure the feet to the underside of the TV set using 4 screws provided.

Connecting your set

1. Connect the TV to your power socket.
2. If you wish to use the TV to receive Freeview/Saorview channels, connect the RF input from the TV to your outdoor Digital TV aerial. If you do not wish to receive Freeview/Saorview, skip this step.

Powering On the TV

Switch on the television by pressing the TV control stick located on the TV set.

Insert the batteries supplied into the remote control and press the standby button to power on the TV.

First time installation

Introduction & Language
When the set fi rst turns on, it enters the First Time Installation mode. This can be restarted by restoring the set to default settings in the ‘About TV’ Menu.
Select your preferred on-screen display language. This will change the language in which the menus and associated information is displayed in.

Country
Select the correct country in which the set will be used in. This will enable the set to correctly install the functions applicable in the country of use.

PIN
This needs to be set to establish parentol controls.

Time Zone
Set the Time Zone in which the TV will reside. This may be dependent on the country you select in step 2.

Updates Notice
You will need to agree to certain information collection for the TV set to operate as intended.

Network Set Up
You can connect the TV to your broadband router or wireless network in order to take advantage of the Smart functions. If you connect the TV to your router using an Ethernet cable, the Wifi set up will be skipped.

Set up Netfl ix
If you have a Netfl ix account, it can be set up on the television here. Once set up and validated, the First Time Installation returns to the next step.

TV Mode
Home Mode: For normal use, by default it is set to a power saving mode which reduces the energy used by up to 25% (by reducing the power to the LED/LCD panel). This can be changed in the picture mode settings.

Channel Scan
Choose to install terrestrial channels via Digital or Analog signals.
Note: Analog signals in the United Kingdom have been turned off. Only Digital signals are available.

Wall Mounting the TV

Image for illustration only.
For the dimensions of the VESA mounting, please refer to the Technical Specifi cations section of this document.

1. Remove the four screws that are supplied in the wall mounting holes.
2. The wall mount can now be easily attached to the mounting holes on the rear of the TV.
3. Install the wall mounting bracket to the television as advised by the bracket manufacturer.
4. The picture shows the use of spacers, which are not applicable to all sets/installations.

Connectivity

REMOTE CONTROL

Key

• For models with integrated DVD players.
• For models with PVR Function.
• For models with USB Playback.
• For models with 3D functions.
• STANDBY – Switch on the TV when in standby or vice versa.
• FREEVIEW PLAY – Access the Freeview Play app.
• NUMBER BUTTONS – 0–9 to select a TV channel directly. MUTE – Mute the sound or vice versa.
• TV GUIDE – Opens the 7 day TV guide (digital TV mode).
• VOL (+/-) – To increase/decrease the sound level.
• PICTURE – Scrolls through picture mode options.
• SOUND- Scrolls through sound mode options.
• SOURCE – To display the input/source menu.
• CH (+/-) – To increase or decrease the channel being watched.
• MENU – To display OSD menu.
• EXIT – To exit all menus.
• Allows you to navigate the on-screen menus and adjust the system settings to your preference.
• BACK – To go back a previous step.
• FAV – To display favourites menu.
• INFO – Press once for now/next channel information. Press twice for information about the current programme.
• TEXT – To enter/exit Text.
• SUBTITLE – To switch the dialogue at the bottom of the screen (on/off). TV – To switch to Digital Channels.
• YOUTUBE – Access the Youtube App.
• NETFLIX – Access the Netfl ix App.
• APPS – Access the APPS menu.
• RECORD – Access the USB record function.
• REC LIST – Opens the list of previously recorded items.

To restart the current chapter
To advance forward to the next chapter
To stop the playback/Eject Disc (To EJECT the disc press/hold the button for 4 seconds)
To play in fast rewind mode
To play in fast forward mode
To play/pause

GOTO – To go to a specifi c chapter.
A-B – Press once to set point, press a second time to return to point.
ANGLE – Select different angle of DVD.
REPEAT – To repeat playback.

Sky Remote Code

If you wish to use your Sky remote to operate the TV’s basic functions, you will need a Sky remote control (Revision 9 or later) and you will need to program it with the code 2134. If you wish to use your Sky Q remote to operate the TV’s basic functions, you will need to program it with the code 4170.

To launch the Online Manual, press the [MENU] button and then select Settings

Setup > Help Information

What is included in the box

Accessories
Included with this TV are the following accessories

• 1 x Quick Start Guide
• 1 x Safety Leafl et
• 1 x Remote Control and 2 x AAA Batteries
• 1 x Stand installation pack

Additional Accessories
If you don’t have the RF cable shown below, then you can purchase one from www .umc-uk.co.uk/cables If you are intending to connect your TV to an RF socket in order to receive Freeview you will need this cable.

RF Cable

Microsoft PlayReady™
This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.
Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM- protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected content. Revocation should not aff ect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.

FreeviewPlay
Freeview Play brings together live TV viewing with ‘‘catch up’’ TV services such as BBC iPlayer, ITV player, More4 and Demand 5. The Freeview Play Explore app features a carousel of genres to select from when searching for programmes, such as sport, comedy, dramas and soaps, etc. Content is made up from recommendations of the major broadcasters and offers an alternative means of searching.
Note that to use the full functionality of Freeview Play your set must be connected to the internet.

Please save your box/packaging as you will need this in the event of warranty/service repair or support. We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to package your item in the event of warranty/service repair is in it’s original box/packaging.

Technical Specifi cation

Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).

• Harman Kardon is trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.
• The terms HDMI, HDMI High-Defi nition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
• Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

Quick & easy guide for setting up your TV

• What is included in the box
• Using the remote control
• Setting up the TV for the fi rst time – including attaching the stand
• Connecting other devices to the Television
• Need help setting up or using your TV?

Please contact the UK & ROI Helpline

• *  **Telephone UK:** 0330 024 0803 or ROI 01443 3323

  • Online support at: www.umc-uk.co.uk
  • Email support at: service@umc-uk.co.uk
• Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your phone provider. Hours are correct at time of this document being published.
• Please note these hours are subject to change periodically.
• Calls to the ROI number are charged at the local call rate.

The telephone opening hours are:

• Monday to Friday: 8.30am – 6pm
• Saturday: 9am – 5pm
• Bank Holidays: 10am – 4pm
  Closed Christmas and New Years day.

Register your manufacturers guarantee online within 14 days of purchase at www.registertoday.co.uk/sharp and enter into a prize draw to

References

• registertoday.co.uk
• UMC - Product Support, Sharp, Blaupunkt, Technika, e-motion, Eternity, JMB and Bush
• UMC UK LTD | Warranty & Technical Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>