SHARP 24BI3KA 24 HD READY ANDROID TV User Guide

SHARP 24BI3KA 24 HD READY ANDROID TV User Guide

Setting up the TV set for the fi rst time

Fitting the stand

For stand installation, there are two types of screws provided as shown below. To complete the stand installation you will require a cross head screw driver.

Place the TV set on a fl at and clean surface with the panel facing downwards to avoid damage.

3 x M (4×12)
Used for attaching the stand neck to the TV (fi g.1)

4 x ST (4×12)
Used for attaching the stand base to the stand neck (fi g.3)

1. Attach the stand neck to the rear of the TV set using the 3 x M(4×12) screw.
   

2. Peel off the protective plastic cover then attach the stand base to the stand neck.
   

3. Secure the base to the neck by using the 4 x ST(4×12) screws provided.
   

HELPFUL ADVICE FOR FIRST TIME STAND INSTALLATION

When securing the self-tapping screw/s into the base of the stand (on fi rst installation) the screw/s will be naturally tight as they create a thread in the plastic of the stand neck in order to support a TV of this size.

Ensure the cross head screw driver tip fi ts correctly into the head of the screw and that it is not too big or small.

Screw in all screws individually and partially before tightening all of the screws fully.

If they become very tight try loosening them slightly and then re-tightening them once again as this will continue the process of creating the thread for the screws.

Connecting your set

1. Connect the TV to your power socket.
2. If you wish to use the TV to receive Freeview/ Saorview channels, connect the RF input from the TV to your outdoor Digital TV aerial. If you do not wish to receive Freeview/ Saorview, skip this step.
3. Connect to the internet. Ethernet provides the most stable connection.
   
   

Installing Batteries

Insert the batteries supplied into the remote control and press the standby button to power on the TV.

Button layout

1. Stop/Eject DVD*

2. Play/Pause DVD*

3. Volume up and menu right

4. Volume down and menu left

5. Programme/Channel up and menu up

6. Programme/Channel down and menu down

7. Displays Menu/OSD

8. Displays the input source menu

9. Standby Power On/Off

First time installation

When the set fi rst turns on, it will ask you to select your preferred on- screen display language. This will change the language in which the menus and associated information is displayed in.

Basic installation steps are shown below. These may vary slightly depending on your model. Due to Android software updates, the look and feel of the TV start up procedure and subsequent menus can be subject to chage.

Android Phone users
During the set-up process, you will be prompted to sign-in to your Google account using your pre-installed “Google” app. This set up process will depend upon which model TV you are setting up. Please ensure you have your account details to hand.

Pairing the remote

If during the fi rst time installation process the remote was not paired or skipped, then follow the process below to pair your remote with the television.

1. Turn the set on.

2. Press the button on the remote control.

3. The pairing screen will appear on the TV.

4. Now press and hold the ”Left” and “Home” buttons on the remote simultaneously (highlighted).

5. The LED indicator on the remote control will start to fl ash.

6. Select the detected remote control shown on the screen and press OK.

7. Once paired the pairing screen will disappear.

This process will only need to be carried out if the remote is not paired. Once paired, when the button is pressed it will open the Google Assistant screen on the set and activate voice functionality

The Google Assistant

Using the Google Assistant with your voice

Remote controls with the Google Assistant have a Google Assistant dedicated button and a built-in microphone. To use this feature with the Google Assistant remote control, follow the instructions as below.

1. Before using the Google Assistant, you will need to pair the remote. Please follow step 5 of this guide to pair your remote to enable the Google Assistant.
2. Press the button. The LED indicator on the remote control will illuminate.
3. Wait for the on-screen message from the Google Assistant, then speak into the microphone. A good rule of thumb is to have the microphone positioned about 15-30 centimetres away from your mouth.

By speaking into the microphone, you can search for various content or control your connected smart home devices. Speech examples may be displayed on the television screen depending on your model.

Wall Mounting the TV

Image for illustration only

For the dimensions of the VESA mounting, please refer to the Technical Specifi cations section of this document.

1. Remove the four screws that are supplied in the wall mounting holes.
2. The wall mount can now be easily attached to the mounting holes on the rear of the TV.
3. Install the wall mounting bracket to the television as advised by the bracket manufacturer.

The picture shows the use of spacers, which are not applicable to all sets/installations.

Connectivity

Key

For multimedia playback

STANDBY: Switch on the TV when in standby or vice versa. By long pressing of this button, the set will display a menu offering power down option to energy saving standby mode
SOURCE: To display the input/source menu.

NUMBER BUTTONS: 0–9 to select a TV channel directly.
MUTE: Mute the sound or vice versa.
GUIDE: Opens the 7 day TV guide (digital TV mode).

• VOL (+/-) To increase/decrease the sound level.
• The Google Assistant – Use your voice to access entertainment, control The Google Assistant smart devices, obtain answers on screen, and more.
• HOME – Display the TV Home Menu. HOME
• CH (+/-) – To increase or decrease the channel being watched. CH (+/-)
• MENU – Display LIVE TV menu. This button works only in sources (TV, MENU HDMI, Component, etc.). It will not work in the Home Menu.
• Press once for now/next channel information. INFO
• INFO – Allows you to navigate the on-screen menus and adjust ( OK) the system settings to your preference.
• BACK – To go back a previous step. BACK
• EXIT – To exit all menus.
• NETFLIX: – Access the Netfl
• Prime video: Access the Prime video App.
• YouTube: Access the YouTube App.
• Freeview Play: Access the Freeview Play app. service.
• MTS: Opens audio track menu.
• TEXT : To enter/exit teletext.
• SUB : To switch the dialogue at the bottom of the screen (on/off).
• TV: To switch to Live TV.

– To play/pause media
– To play in fast rewind mode
– To play in fast forward mode
– To stop the playback

COLOUR BUTTONS – Execute corresponding function at that time

Sky Remote Code
If you wish to use your Sky remote to operate the TV’s basic functions, you will need a Sky remote control (Revision 9 or later) and you will need to program it with the code 2134. If you wish to use your Sky Q remote to operate the TV’s basic functions, you will need to program it with the code 4170.

To launch the online manual, press the HOME button, select Apps from the Home menu, and select “E instruction Manual” from the apps list.

What is included in the box

Accessories
Included with this TV are the following accessories

• 1 x Quick Start Guide
• 1 x Safety Leaflet
• 1 x Remote Control and 2 x AAA Batteries
• 1 x Stand installation pack

Additional Accessories
Should you wish to connect older/analogue devices to your television, you can purchase the necessary cables either from your retailer or at www.umc- uk.co.uk/cables

RF Cable

Mini YPbPr Cable
Required if you wish to connect a device with YPbPr/ Component output to the TV’s Mini YPbPr Input

Microsoft PlayReady™
This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.

Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM- protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected ect unprotected content or content protected by other content access content. Revocation should not aff technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.

Freeview Play brings together live TV viewing with ‘‘catch up’’ TV services such as BBC iPlayer, ITV player, More4 and Demand 5. The Freeview Play Explore app features a carousel of genres to select from when searching for programmes, such as sport, comedy, dramas and soaps, etc. Content is made up from recommendations of the major broadcasters and offers an alternative means of searching.

Note that to use the full functionality of Freeview Play your set must be connected to the internet

Please save your box/packaging as you will need this in the event of warranty/service repair or support. We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to package your item in the event of warranty/service repair is in it’s original box/packaging.

Technical Specifi cation

<0.5W in Standby)>

• 2 x USB
• 1 x Micro SD card reader
• 1 x RJ45 LAN/Ethernet 1 x Composite/CVBS Video
• 1 x Mini Component/YPbPr
• 1 x L/R Audio input for Composite/CVBS & Component/YPbPr

Sound Outputs| 1 x Digital Optical Audio output  1 x 3.5mm Headphone
Speaker/ Amplifi er Watts (RMS)| 2 x 5 / 2 x 3
Voltage and power consumption| AC 220V ~ 240V; 50Hz 21/40W (ecomode/max) (
Dimensions including stand (mm)| 560W x 385H x 140D
Net weight (Kgs)| 3.8
Wall Mounting| VESA 100 x 100 (mm)

The terms HDMI, HDMI High-Defi nition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Google, Google Play, YouTube, Android TV and other marks are trademarks of Google LLC.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

References

• registertoday.co.uk
• UMC - Product Support, Sharp, Blaupunkt, Technika, e-motion, Eternity, JMB and Bush
• UMC UK LTD | Warranty & Technical Support
• Sharp Television Support - Manuals and TV info

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>