FUAVE FF9020W Floor Fan User Manual

FUAVE FF9020W Floor Fan

Product Information

• Product Name: Fuave FF9020W Floor Fan
• Model Number: FF9020W Trademark: Fuave
• Manufacturer: Coolblue B.V.
• Address: Weena 664, 3012CN, Rotterdam, The Netherlands
• Country of Origin: China

Foreword

• This manual contains all information for the correct, efficient and safe use of the appliance. This manual is intended for the end user and/or buyer of this appliance.
• Installation of the appliance, use and all cleaning and maintenance activities as described in the instructions may be carried out by the end user, unless clearly indicated to the contrary.
• Make sure you have read and understood the instructions in this manual completely before installing or using the appliance. This prevents fire, explosions, electric shocks and/or other hazards that may result in physical injury and/or material damage.
• Please retain this document for future use as long as you use and/or own the appliance and pass it on to subsequent users of the appliance.
• Coolblue B.V. cannot in any way be held liable for material or immaterial damage to you or to others, the appliance, your other belongings or belongings of others caused by not following the instructions in this manual.
• The warnings and safety instructions in this manual do not cover all possible circumstances and situations. The Fuave fan is also called appliance in this manual.
• If you contact our customer service, make sure you have the model number ready. The information can be found on the type plate or on the front of this manual.

Original instructions

This manual was originally written in Dutch. All other languages are translated documents. In the case of translation errors, the Dutch version is leading. This is a translation of the original Dutch-language instructions for use.

Symbol used

Copyright

The data depicted in this manual, including texts, photographs, graphic drawings, trademarks, (trade) names and logos, are the property of Coolblue B.V. and are protected by copyright, trademark law and/or any other intellectual property right, unless these data belong to a third party. You are never allowed to reproduce, transfer, distribute, store or make the contents of the manual available to third parties, in whole or in part, without the prior written consent of Coolblue B.V. and/or the third party to whom the data belong.

Contact details

Fuave is a registered brand of Coolblue B.V. Customer service can be reached at: www.coolblue.nl/en/customer-service

Coolblue B.V.

Weena 664

3012 CN Rotterdam Netherlands

Safety

• WARNING! Read this manual and safety instructions carefully and make sure you understand the contents before using the appliance with the appropriate parts. Failure to comply with all instructions may cause material damage and/or serious injury.

Safety warnings and regulations

WARNING!

• This appliance may be used by children from eight years of age and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are under supervision or have been trained in the safe use of the appliance and that they understand the associated
• This appliance should not be used by children under the age of
• This appliance and its components are not toys, so children should not play with the appliance or its
• Children, legally incompetent persons and domestic animals should be supervised while using the Children should be supervised to ensure that they do not play with the appliance.
• Cleaning and user maintenance must not be carried out by children without
• RISK OF SUFFOCATION! Keep packaging away from
• This appliance is intended for domestic use and similar applications such as
  • staff kitchens in shops, offices and other work environments;
  • farms and guests in hotels, motels, B&B and other residential environments;
  • catering and similar non-retail
• This appliance is for indoor use This appliance should not be used outdoors.
• This appliance is not intended for mounting on walls, ceilings or
• The appliance must be stored in a room free of naked flames, gas-powered appliances or electric heaters.
• The appliance must be stored in such a way so as to prevent mechanical
• Store the appliance out of reach of unauthorised persons and do not allow anyone unfamiliar with the appliance and these instructions to use
• Do not use the fan at temperatures above 40°C, in the vicinity of heating equipment or in dusty areas.
• Take preventive measures to prevent the circulation of gases in the room; close doors and windows.

Safety instructions: installation

**** WARNING

DANGER! Risk of fire / flammable materials.

• Install the appliance in accordance with the installation Incorrect installation may cause electric shocks, fire and/or property damage.
• Use only the accessories provided for the
• Ensure that the plug and socket are clearly visible and accessible at all

Safety instructions: use

Safety of persons

**** WARNING!

• Always be alert and act with Do not use electrical appliances if you suffer from impaired concentration or lack of awareness, or if you are under the influence of drugs, alcohol or medications. Even the slightest distraction can lead to serious accidents and injuries when using electrical appliances.
• Always operate and use the appliance as described in these instructions for Assume that what is not specified here is also not possible.
• RISK OF SUFFOCATION! Keep packaging materials out of reach of Packaging materials are not toys.

Safety in use

**** WARNING!

• Follow the maintenance instructions for trouble-free use and long service
• Do not use the appliance in the vicinity (at least one metre away) of highly flammable or explosive substances or
• Never expose the appliance to a naked
• Do not expose the appliance to direct sunlight to avoid discolouration of the
• Do not use paint, cleaning sprays, anti-insect sprays, on or near the appliance. This may cause deformation of the housing or electrical damage.

Do not expose the appliance to rain or use it in damp or wet environments, such as the bathroom and laundry room, nor near a bath, shower or swimming pool.

• Do not use the appliance close to a fire source, close to splashing oil, direct sunlight or splashing

• Do not spill or pour any water, oil or liquid onto or into the

• Always move and/or relocate the appliance

• Do not operate the appliance if you notice damage to the appliance, the power cable or the plug, or if does not work properly, has fallen or otherwise Contact customer service for further information (See Foreword for contact details).

• Unplug the appliance if you hear strange noises, smell an odour or see smoke.

• Do not insert fingers or objects such as pens through the grilles in the appliance and especially warn children of these

• RISK OF FIRE! Do not place objects on the appliance and never cover the Never block the grilles for incoming and outgoing air, not even partially. This can cause fire!

• Do not climb or stand on the

• If the appliance is not in use, or when cleaning it, carrying out maintenance or moving it, first turn it off and then remove the plug from the

Safety instructions: batteries

The following warnings apply to both the battery in the appliance and the button cell battery in the remote control.

WARNING

DANGER! Risk of fire / flammable materials

• WARNING! KEEP OUT OF REACH OF CHILDREN. Ingestion may lead to chemical burns, perforation of soft tissue perforation and Serious burns may occur within two hours after ingestion. Seek immediate medical attention.

• Dispose of used batteries Keep new and used batteries out of reach of children. If you think batteries have been swallowed or inserted in a body part, you must seek immediate medical attention.

• Never use batteries if they are dented, leaking or

• Remove leaking, deformed or corroded batteries from the product and dispose of them properly with the appropriate protective If a battery has leaked: avoid contact with skin, eyes and mucous membranes. If necessary, rinse affected areas with plenty of water and seek immediate medical attention.

• Different types of batteries or new and used batteries may not be used

• Clean the battery and appliance contacts prior to installing the

• When installing the batteries, pay attention to the correct

• The orientation of the positive (+) and negative (−) terminals of the battery must correspond to the + and − on the battery compartment.

• Depleted batteries should be immediately removed from the appliance and disposed of Depleted batteries may corrode, releasing chemicals that damage your health and the appliance. Remove the batteries from the appliance if you are not using it for a long time, to prevent them from leaking.

• Do not deform, burn or disassemble batteries and never drill with a sharp Extreme heat can lead to explosion and/or leakage of corrosive fluid. Mechanical damage can result in the release of gaseous substances, which may be highly irritating, flammable or toxic.

• Do not allow children to replace batteries without adult

• Store unused batteries in their original packaging, away from metal If already unpacked, do not mix batteries.

• Do not short-circuit batteries and do not immerse them in This causes a risk of explosion, fire, heat, smoke and/or gas development.

• If the battery has accidentally fallen into the water, remove it Put the battery in a safe, open spot and stay away from it until it is completely dry. Do not reuse the dried battery, but dispose of it as instructed in Dispose of batteries as waste.

Safety instructions: elektrical safety

**** WARNING

DANGER! Risk of fire / flammable materials.

If there are any questions regarding the instructions for electrical safety, please contact customer service (see Foreword for contact details).

• Before use, check that the voltage on the socket you want to use matches that on the type plate of the appliance (220-240V~ 50/60Hz). Damage caused by faulty voltage is not covered by the guarantee.
• RISK OF ELECTRIC SHOCK! Only use the appliance’s factory-fitted plug and never change The plug must match the type of socket used to reduce the risk of electric shocks.
• RISK OF ELECTRIC SHOCK! Do not remove the earth contacts from the
• RISK OF ELECTRIC SHOCK! Never pull the power cable to carry or move the appliance or to disconnect the plug. Keep the power cable away from heat, oil, sharp edges or corners and moving Do not make any changes to the power cable or submerge it in water or other liquids. Do not turn or kink the power cable, do not roll up the power cable too tightly after use and do not wind it up around the appliance; this may damage the insulation layer! Damaged or tangled power cables increase the risk of electric shocks.
• RISK OF ELECTRIC SHOCK! Do not touch the appliance, plug or mains cable with wet or damp hands.
• Fully unroll the appliance’s power cable before plugging it into the This is to prevent heat generation in the cable.
• Do not pass the power cable under a carpet or cover it with mats, runners and the This can lead to unforeseen heat generation.
• Regularly check the appliance for damage to the power cable and plug. If there is visible damage, a strong smell, or parts become excessively hot, stop using it immediately and remove the plug from the
• It is not permitted to open, change or repair the appliance Do not drill holes into the appliance anywhere to avoid dangerous situations. The appliance, plug and/or cable must be repaired and/or replaced by an electrician or an equivalent qualified person. Repairs by amateurs invalidate the guarantee and can cause dangerous situations!

Explanation of graphics symbols on the product and

Product Features

System overview

The Fuave fan is a standing comfort fan intended to move air to create a pleasant perceived temperature. The Fuave FF9020W fan is supplied in separate parts and can be mounted in a few simple steps before use.

Technical data

The technical data are indicated on the type plate on the appliance (also printed on page 2).

• Voltage: 220-240V~
• Frequency: 50/60Hz
• Power: 30W
• Serial number: [serial number]
• Batchcode: [batchcode] – Registered trademark of Coolblue B.V.

Guarantee

This appliance comes with a guarantee period of two years after purchase. For more information on guarantee conditions, please visit www.coolblue.nl/en /customer-service. In any case, you must have the purchase order with purchase and/or delivery date in order to be able to claim the guarantee.

Usage Instructions

Safety Precautions:

• Read all safety warnings and instructions before using the product.
• Follow all safety precautions during installation and use.
• Ensure the safety of individuals while using the product.

Installation :

• Unpack the device carefully.
• Install the device according to the provided instructions.

Usage :

• Before using the device, read all important information.
• Identify the main parts of the fan.
• Turn on and off the device as needed.
• Use the fan according to your preferences.
• Adjust the height and vertical wind direction of the fan as desired.

Cleaning and Maintenance:

• Follow important information regarding cleaning and maintenance.
• Clean the housing of the fan regularly.
• Perform thorough cleaning when necessary.
• Replace the battery in the remote control when needed.

Troubleshooting and Solutions:

• Refer to the troubleshooting section for assistance with common issues.

Disposal:

• Dispose of the product and packaging materials properly.
• Follow local regulations for battery disposal.

Note: For any questions or concerns regarding electrical safety, contact the customer service mentioned in the preface section. For further information and online access to the manual, visit www.coolblue.nl and search for the article number. Please note that this manual is originally written in Dutch, and other languages are translated versions. In case of any inconsistencies, the Dutch version is considered authoritative. Contact Information: Fuave (Coolblue B.V.) Customer Service: www.coolblue.nl/klantenservice Address: Weena 664, 3012 CN Rotterdam, The Netherlands

Installation

Important information

Read and follow all instructions in chapter 1 , ‘ Safety’.

Unpacking the appliance

RISK OF SUFFOCATION!

Keep packaging materials out of reach of children. Packaging materials are not toys. WARNING!

Do not use a damaged appliance but contact customer service. See Foreword for the contact details.

To turn the appliance on:

1. Remove all packaging material and any transport attachments present (e.g. tape, tie-wraps, cable ties and protective film).
2. Check that all parts are present and that the appliance and accessories are not damaged.

Part of the appliance

Installing the appliance

WARNING!

Do not connect the appliance to the power supply until it is installed as instructed.

Install the stand on the base:

1. Remove the nut from the bottom of the pedestal by unscrewing it
2. Place the pedestal in the Pay attention to the correct orientation of the plug in the base and the female plug at the bottom of the stand; the slot at the bottom of the pedestal must be directed towards the front of the base. Take care not to force the installation of the pedestal; it only fits one way.
3. Secure the pedestal to the base by tightening the nut

1. Remove the blade nut from the motor shaft by loosening the blade nut clockwise (NOTE, this will loosen by turning the other way than you are used to). Hold the metal shaft while loosening.

2. Remove the lock nut from the fan motor by unscrewing it anticlockwise.

3. Installing the rear guard:
   Loosen the rear guard from the front guard: firmly hold both guards and rotate the rear guard anticlockwise. Remove the protective foam from the fan blade. Place the rear guard on the fan motor. The guard has five retaining pins that should engage with the slots of the fan motor housing. Secure the rear guard to the fan motor with the lock nut. Firmly tighten the lock nut clockwise

4. Installing the fan blade:

5. Place the fan blade correctly on the motor shaft The slot in the back of the fan blade should fall over the (perpendicular) pin of the shaft.

6. Secure the fan blade to the motor shaft with the blade Tighten the blade nut anticlockwise. (NOTE: this tightens by turning the other way than you are used to). Hold the fan blade while loosening.

Install the front guard:

Place the front guard on the fan. Put the guard straight on the fan and tighten it clockwise. If the guard is not fixed after turning, position the guard so that the slots of the front guard fall into the retaining pins of the rear guard. Using the screwdriver provided, screw the metal screw into the hole in the fan guard to secure the front guard.

Ready the remote control for use:

Carefully pull the transparent strip out of the remote control battery compartment. The battery now makes contact and the remote control is ready for use. The back of the remote control is magnetic. The remote control can be attached to the metal part of the pedestal.

Ready the fan for use:

Fully unroll the power cable of the appliance. The appliance is now ready for use. Insert the plug in the socket. For information on connecting and using the appliance, see the Use section.

RISK OF TRIPPING!

Lay the power cable outside the walking route. Ensure that the power cable is not stepped on and that no furniture or other items are placed on it.

Use

Important information ****

• Read and follow all instructions in chapter 1, ‘Safety’.
• Do not leave a working appliance unattended, even for a moment!
• Do not leave the appliance unattended with the plug in the
• Select a suitable place for use that satisfies the following points:
• A firm, flat and horizontal surface;
• Near an electrical socket;
• On all sides of the appliance always at least 10 cm free space and away from curtains;
• At least one metre from televisions or radios to prevent electromagnetic

Important parts

The control panel

The touch-sensitive control panel (M) allows all functions to be selected and set. A slight touch is sufficient to operate a button.

The remote control.

The range of the remote control is about five metres if the remote control is pointed directly at the signal receiver (L), at the front of the base.

Turning the appliance on and off

Before using the appliance, check that:

• The appliance is installed according to the regulations and safety Do not use the appliance until installed as instructed!
• The appliance does not show any damage or
• The socket to be used supplies the voltage on the appliance’s type plate (220-240 V; 50 Hz).

Insert the appliance’s plug into the socket. The unit will give a beep and is in standby mode.

To turn the appliance on:

Press the power button to turn on the appliance. The control panel lights up. Set the desired function. See Control Panel Usage and Remote Control Usage for more information.

To turn the appliance off:

Press the power button to turn off the appliance. The appliance switches off (standby mode). Insert the appliance’s plug into the socket.

Using the fan

Description of the use of the functions on the control panel and the remote control.

To set a scheduled shutdown:

• Press the power button to turn on the
• Touch the on/off button The screen flashes and displays the set
• Touch the timer off button within five seconds and repeat until the screen shows the desired
• Wait five seconds until the screen stops flashing and displays the normal The timer is now set and the appliance will switch off automatically after the set number of hours.

The switch-off timer is cleared when the appliance is turned off manually. To turn off a planned shutdown:

• Touch the on/off button The screen flashes and displays the set
• Touch the timer off button within five seconds and repeat until the screen displays 0H (zero hours).
• Wait five seconds until the screen stops flashing and displays the normal The timer is now off.

If the timer is switched on, the indicator above the ‘Timer’ button lights up. Press the ‘Power’ button once, or the ‘Timer’ button nine times to turn off the timer; the indicator above the button goes off.

LED: display on/off

This function is only available on the remote control. Press this button to deactivate the display.

Remote control

All keys on the remote control match the keys on the control panel. The back of the remote control is magnetic. The remote control can be attached to the metal part of the pedestal.

Setting the height of the fan

To adjust the fan height:

Hold the fan at the top of the extension pole (F). Press and hold the height adjustment button (G). The extension pole is now unlocked. Adjust the extension pole (F) to the desired height. Release the height adjustment button (G). Then move the extension pole (F) slightly up or down until a click is audible. The extension pole is now locked.

Cleaning and maintenance

Important information

• Carry out cleaning and maintenance as This extends the life of the appliance and will keep it working properly.
• RISK OF ELECTRIC SHOCK! Before cleaning and maintenance, turn off the appliance with the power button and remove the plug from the socket. Ensure that the plug is not accidentally plugged into the socket during the activities.
• RISK OF BURNS! Wait until all hot parts of the appliance have cooled down before starting cleaning and maintenance. WARNING! Never spray the appliance and make sure no water gets into it. Never use aggressive cleaning agents, white spirit, detergents, impregnated wipes or other cleaning solutions. These may damage the housing and appliance.
• Cleaning and user maintenance must not be carried out by children without

Cleaning the housing

To clean the housing:

1. Touch the power button to switch off the appliance and remove the plug from the
2. Use a soft damp cloth to wipe the
3. Then wipe the appliance dry with a soft

Thorough cleaning

Depending on the level of use and the operating environment, dust and other dirt may have ended up on the fan blade and/or the inside of both guards. In this case, more thorough cleaning is required.

WARNING! Make sure the appliance is switched off before removing the guard. Never operate the appliance without the front and rear guard; this can result in serious injury. Make sure that the plug cannot be inserted into the socket during the work. Always supervise the appliance when cleaning.

To clean the appliance thoroughly:

• Press the power button to turn off the
• Remove the mains plug from the
• Remove front guard, blade nut and fan blade:

To do this, follow steps 6 and 5 of the instructions under Installation of the appliance in reverse order.

• Use a soft damp cloth to wipe the fan blade and
• Then wipe the fan blade and guards dry with a soft
• Follow steps 5 and 6 of the instructions under Installation of the appliance to replace the fan blade, blade nut and front

Replacing the battery in the remote control

The battery of the remote control is a button cell of type CR2025. Do not use any other batteries.

To replace the battery:

1. Hold the remote control so that the buttons face
2. Slightly pinch the protruding points of the battery
3. Then pull the battery compartment out of the remote
4. Remove the old battery.
5. Insert a new battery into the battery compartment
6. Slide the battery compartment back into the remote control.

Malfunctions and solutions

The following cases are not always a fault. See the possible solutions before asking for service.

The appliance does not start when the on/off button is pressed or the ON/OFF button of the remote control is pressed.| The appliance has no power.

The signal receiver does not get the signal of the remote control.

The battery in the remote control is empty.

The foil in the battery compartment has not been removed.

A fuse has blown in the meter cabinet.

| Check that the plug is in the socket and whether the cable or plug is damaged.

Check that the earth-leakage switch is enabled. Check that there isn’t a power failure.

Try holding the remote control lower and aiming it directly at the display on the base.

Replace the battery of the remote control. See Replacing the battery of the remote control for more information.

Gently pull the transparent strip from the battery compartment of the remote control. The battery is now connected and the remote control is ready for use.

Remove the appliance’s plug from the socket and check the fuses in the meter cabinet. If the problem persists, please contact customer service (see Foreword for the contact details).

The appliance stops automatically.| orzaakThe appliance is automatically disabled by the setting of the timer.| Press the on/off button to turn the appliance on.
The fan blade and/or the protective covers

are dusty or dirty.

|  | See Thorough Cleaning for information about cleaning.
The appliance makes a noise.| The surface on which the appliance is placed is not firm, flat or horizontal.| Move the appliance to a place with a firm, flat and horizontal surface.
I cannot set the extension pole

higher.

|  | Push the extension pole one click down and try to adjust the height again.
I cannot press the height adjustment button.|  | Press the extension pole one click down and try to press the height adjustment button again.

Taking out of service

If the appliance is stored for a longer period, the following measures must be taken:

1. Press the power button to turn off the
2. Remove the mains plug from the
3. Clean the appliance according to the instructions in Cleaning and maintenance.
4. Remove the battery from the remote See Replacing the battery in the remote control for battery removal instructions.
5. If possible, pack the appliance in its original packaging or in a plastic bag and put it in a dry

WARNING!

Do not place heavy objects on the appliance. This may cause deformations and damage to the appliance.

Waste disposal

Dispose of the appliance as waste

This symbol on the product indicates that this product must not be treated as normal household waste, but should be collected separately. Return the product to a collection point for recycling waste electrical and electronic equipment if you live within the EU or in other European countries that have separate collection systems for waste electrical and electronic equipment. By properly disposing of the product as waste, you help to avoid potential environmental and public health risks that could otherwise arise from mishandling discarded equipment. Recycling materials contributes to the conservation of our natural resources.

Disposal of the packaging material as waste

Dispose of the packaging material through your local recycling facility. By properly disposing of packaging material and packaging waste, you help prevent potential risks to the environment and public health. The symbol on the packaging indicates that the packaging is made of cardboard.

Dispose of the batteries as waste

The appliance contains batteries. Batteries may not be disposed of in ordinary household waste. The batteries may contain toxic substances and are subject to specific regulations. Always return batteries to a designated collection point.

References

• Service client | Coolblue - Tout pour un sourire
• Coolblue - alles voor een glimlach
• Customer service | Coolblue - Anything for a smile

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>