SHARP PS-919 BK Party Speaker System User Manual
- June 13, 2024
- Sharp
Table of Contents
Software upgrade manual
PS-919
2.1 Party
Speaker System
Does my device needs an updated firmware?
Only devices with version “V1” on serial number label will benefit from new
update.
Devices with “V2” on the serial number label or higher does not require
firmware updates.
What changes are included in the update?
- General sound improvements How to check what’s the version of my device?
Please find product label at the bottom of your device, it should look like
this:
If the
product serial number starts with PS-919BKV01 or PS-919WHV01, then your device
will benefit from the update.
If the product serial number starts with PS-919BKV02 or PS-919WHV02, then your
device won’t benefit from the update.
How to prepare USB flash drive?
-
Prepare empty USB flash drive, (capacity= 32GB max, file format= FAT32).
-
Download the firmware file from “https://www.sharpconsumer.com/ audio/ps919bk/” website into your computer.
File name “PS-919 – Software update” -
Unzip the file and copy extracted file to the root directory of your USB flash drive.
-
Ensure that USB flash drive has only one file ”app.bin”.
How to upgrade the firmware by the USB?
-
Connect unit to mains power for a duration of upgrade process.
-
Make sure that there is only one file on a USB.
-
Insert the USB flash drive with the “app.bin” software file to the USB port on the back of the unit under rubber protector.
-
Unit will start upgrade automatically after USB is inserted.
-
After about 3 seconds, you will hear a prompt tone and the unit will power off automatically.
-
Update was successfully applied, you can safely remove the USB drive from back of the device.
-
Device can be now used.
Sharp Consumer Electronics Poland sp. z o.o.
Ostaszewo 57B, 87-148 Łysomice, Poland
Made in China
SAU/MAN/0187
www.sharpconsumer.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>