COOK-IT Luxury Electric Milk Frother Stainless Steel 4 in 1 User Manual

COOK-IT Luxury Electric Milk Frother Stainless Steel 4 in 1

Product Information: Milk Frother
The Milk Frother is a versatile appliance that allows you to create perfectly frothed milk for your favorite hot beverages. It is designed for household use and comes with important safety features to ensure safe and efficient operation.

Important Safety Information

• Always read the instructions carefully before using the milk frother.
• Use the appliance only as directed.
• Operate the appliance with the cover in place at all times.
• Do not use the milk frother outdoors.
• To disconnect, turn off the appliance and remove the plug from the wall outlet.
• Avoid removing the lid during the brewing cycles to prevent scalding.

Product Components

• Power cord
• Milk frother jar with lid
• Function button
• ON/OFF button
• Power base
• Frothing paddle

Product Capacities

• Maximum capacity for heating milk: 300 ml
• Maximum capacity for frothing milk: 150 ml
• Minimum capacity for heating or frothing milk: 75 ml

Product Usage Instructions

1. Before using the milk frother for the first time, ensure it is clean and free from any packaging materials.
2. Place the milk frother on a stable and heat-resistant surface.
3. Connect the power cord to the power base and plug it into a suitable electrical outlet.
4. Pour the desired amount of milk into the frother jar, making sure not to exceed the maximum capacity for heating or frothing.
5. Attach the lid securely onto the jar.
6. Press the function button to select the desired foam consistency: warm and thin foam, warm and thick foam, or frothing only without warming.
7. Press the ON/OFF button to start the frothing or heating process.
8. Wait for the milk frother to complete the operation. Do not remove the lid during the process to avoid scalding.
9. Once finished, press the ON/OFF button to turn off the milk frother.
10. Unplug the power cord from the electrical outlet.
11. Carefully remove the lid and pour out the frothed or heated milk.
12. Clean the milk frother according to the provided cleaning and maintenance instructions in the user manual.

Cleaning and Maintenance
To ensure optimal performance and longevity of your milk frother, regular cleaning and maintenance are necessary. Follow the instructions provided in the user manual for proper cleaning and maintenance procedures.

Environment-Friendly Disposal
Please help protect the environment by disposing of non-working electrical equipment at an appropriate waste disposal center in accordance with local regulations.

Contact Information
If you have any questions or need assistance with the milk frother, please contact our customer support team at SALES@MEDIAEVOLUTION.NL.

Thank you for choosing Cook-It Milk Frother!

IMPORTANT SAFETY INFORMATION
Read all instructions carefully before using the milk frother. Use only as directed.

IMPORTANT SAFETY PRECAUTIONS
Please read this carefully.
When using an electrical appliance, the following precautions have to be taken. Read all instructions before using the product.

1. Read all instructions before using.
2. Before connecting the appliance to the power supply, check that the voltage indicated on the appliance corresponds with the voltage in your home. If this is not the case, contact your dealer and do not use the milk frother.
3. The attached base can not be used for other than the intended use.
4. Do not operate the appliance without anything in it to avoid damaging the heat elements.
5. Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
6. Do not let the cord hang over the edge of a table or counter or touch a hot surface.
7. Do not place on or near a hot gas or electric burner, in a heated oven or where it may touch a heated appliance.
8. Ensure that the appliance is used on a firm and flat surface out of reach of children, this will prevent the appliance from overturning and prevent damage or injury.
9. Keep hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the blender.
10. To protect against a fire, electric shock or personal injury, do not immerse cord, electric plugs, jar or base in water or other liquids.
11. Close supervision is necessary when any appliance is used by or near children.
12. Do not touch the hot surface. Use the handle or the button.
13. Extreme caution must be used when moving an appliance containing hot milk.
14. Avoid contacting moving parts.
15. The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.
16. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment.
17. The appliance only used for frothing and heating milk. Do not use the appliance for other than intended use.
18. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliances by a person responsible for their safety.
19. Always operate the appliance with a cover in place.
20. This appliance is intended to be used in households.
21. Do not use outdoors.
22. To disconnect, turn any control to ”off”, then remove the plug from the wall outlet.
23. Scalding may occur if the lid is removed during the brewing cycles.

THE POWER CORD

• A short power-supply cord (or detachable power-supply cord) is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.
• longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
• If a long detachable power-supply cord or extension cord is used:
  • The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance;
  • If the appliance is of the grounded type, the extension cord should be a grounding type 3-wire cord; and
  • the longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over.

THE MILK FROTHER

BEFORE THE FIRST USE
The appliance can be used for finishing the following tasks separately: I. frothing and heating milk; II. only frothing separately, without heating; III. only heating separately, without frothing.

1. Before using your milk frother, clean all the parts according to the section “CLEANING AND MAINTENANCE”.
2. Important: do not wash any parts in the dishwasher, and do not immerse the jar or base in water. This may permanently damage the product and void the warranty.
3. The amount of milk to be heated or frothed shall comply with the requirement shown in Figure.

OPERATION OF THE MILK FROTHER

Warm and thick foam

1. Place the appliance on a flat surface.

2. Then open the lid, and insert the frothing paddle onto the shaft on the bottom of jar.

3. Fill the jar with the desired amount of milk, and replace the lid.
   NOTE: The max milk quantity permitted to add is 150ml (see Fig. 1), to avoid milk overflowing after frothing. The min milk quantity permitted to add is 75ml.
   NOTE: Please use whole milk, cold milk (7-9℃).

4. Connect the plug to a power outlet.

5. Press the FUNCTION button once, the working indicator of “Warm and thick foam” will light up. Then press the ON/OFF button once, the appliance will start to work. Once the temperature of milk has achieved the setting value, the appliance will stop working;
   Note : During operation, you can stop operating by pressing the ON/OFF button once.

6. When the appliance has stopped operating, open the lid, and pour out the warmed and frothed milk to enjoy it.
   Caution : Minimum 3 minutes of rest time must be maintained between two continuous cycles, otherwise, the appliance will enter a self-protection state automatically after working for 5 cycles continuously, the working indicator will flash and the switch button will not be activated, after about 5 minutes, the appliance will enter standby state and you can continue operating the appliance.
   NOTE: Please clean the jar according to the section “CLEANING AND MAINTENANCE” between two continuous cycles.

7. Always turn off the milk frother and disconnect the power supply when not use.

Warm and thin foam

1. Place the appliance on a flat surface.

2. Then open the lid, and insert the frothing paddle onto the shaft on the bottom of jar.

3. Fill the jar with the desired amount of milk, and replace the lid.
   NOTE : The max milk quantity permitted to add is 150ml (see Fig. 1), to avoid milk overflowing after frothing.The min milk quantity permitted to add is 75ml.
   NOTE: Please use whole milk, cold milk (7-9℃).

4. Connect the plug into a power outlet.

5. Press the FUNCTION button twice, the working indicator of “Warm and thin foam” will light up. Then press the ON/OFF button once, the appliance will start to work. Once the temperature of the milk has achieved the setting value, the appliance will stop working;
   Note : During operation, you can stop operating by pressing the ON/OFF button once.

6. When the appliance has stopped operating, open the lid, pour out the warmed and frothed milk to enjoy it.

Caution: Minimum 3 minutes rest time must be maintained between two continuous cycles, otherwise, the appliance will enter a self-protection state automatically after working for 5 cycles continuously, the working indicator will flash and the switch button will not be activated, after about 5 minutes, the appliance will enter standby state and you can continue operating the appliance.
NOTE: Please clean the jar according to the section “CLEANING AND MAINTENANCE” between two continuous cycles. Always turn off the milk frother and disconnect the power supply when not use.

Only warming separately, without frothing

1. Place the appliance on a flat surface.

2. Then open the lid, insert the frothing paddle onto the shaft on the bottom of jar.

3. Fill the jar with the desired amount of milk, and replace the lid.
   NOTE : The max milk quantity permitted to add is 300ml (see Fig. 1), to avoid milk overflowing after mixing. The min milk quantity permitted to add is 75ml.
   NOTE: Please use whole milk, cold milk (7-9℃).

4. Connect the plug into a power outlet.

5. Press the FUNCTION button three times, the working indicator of “Only warming separately, without frothing” will light up. Then press the ON/OFF button once, and the appliance will start to work. Once the temperature of the milk has achieved the setting value, the appliance will stop working;

6. When the appliance has stopped operating, open the lid, pour out the warm milk and enjoy it.
   Caution: Minimum 3 minutes rest time must be maintained between two continuous cycles, otherwise, the appliance will enter a self-protection state automatically after working for 5 cycles continuously, the working indicator will flash and the switch button will not be activated, after about 5 minutes, the appliance will enter standby state and you can continue operating the appliance.
   NOTE: Please clean the jar according to the section “CLEANING AND MAINTENANCE” between two continuous cycles.

7. Always turn off the milk frother and disconnect the power supply when not use.

Only frothing separately, without warming

1. Place the appliance on a flat surface.

2. Then open the lid, and insert the frothing paddle onto the shaft on the bottom of jar.

3. Fill the jar with the desired amount of milk, and replace the lid.
   NOTE: The max milk quantity permitted to add is 150ml (see Fig. 1), to avoid milk overflowing after frothing. The min milk quantity permitted to add is 75ml.
   NOTE: Please use whole milk.

4. Connect the plug to a power outlet.

5. Press the FUNCTION button four times, the working indicator of “Only frothing separately, without warming” will light up. Then press the ON/OFF button once, the frothing paddle will rotate for frothing milk separately, but the heating element will not heat. And the appliance will automatically stop rotating after operating.NOTE: During operation, you can stop operating by pressing the froth button once.

6. When the appliance has stopped operating, open the lid, pour out the frothed milk and enjoy it.
   Caution: Minimum 3 minutes rest time must be maintained between two continuous cycles, otherwise, the appliance will enter a self-protection state automatically after working for 5 cycles continuously, the working indicator will flash and the switch button will not be activated, after about 5 minutes, the appliance will enter standby state and you can continue operating the appliance.
   NOTE : Please clean the jar according to the section “CLEANING AND MAINTENANCE” between two continuous cycles.

7. Always turn off the milk frother and disconnect the power supply when not use.

CLEANING AND MAINTENANCE

Always disconnect the appliance from the power outlet and allow it to cool down before cleaning.
CAUTION : Never immerse the jar, power cord in water, or allow moisture to contact with these parts.

1. Wash lid with water and mild detergent. The lid is not a dishwasher-safe component. Rinse thoroughly and dry.
2. Remove the mixing paddle or frothing paddle, and wash it completely in warm water.
3. Wash the inner of jar with a combination of a mild detergent and water and then wipe clean with a soft damp cloth.
4. Wipe the appearance of jar with a soft damp cloth or cleaner, never use a poisonous cleaner.
   NOTE: Do not use chemical, steel, wooden or abrasive cleaners to clean the outside of the appliance to prevent gloss loss.

ENVIRONMENT FRIENDLY DISPOSAL You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working electrical equipment to an appropriate waste disposal center.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>