Leviton 41089-4GP QuickPort Surface Mount Housing Instruction Manual
- June 13, 2024
- Leviton
Table of Contents
Leviton 41089-4GP QuickPort Surface Mount Housing
Instructions for Use
IMPORTANT INSTRUCTIONS
- Read and understand all instructions. Follow all warnings and instructions marked on the product.
- Do not use this product near water e. g., near a tub, wash basin, kitchen sink, or laundry tub, in a wet basement, or swimming pool.
- Never push objects of any kind into this product through openings, as they may touch dangerous voltages.
- SAVE THESE INSTRUCTIONS.
SAFET Y INFORMATION
- Never install communications wiring or components during a lightning storm.
- Never install communications components in wet locations unless the components are designed specifically for use in wet locations.
- Never touch uninsulated wires or terminals unless the wiring has been disconnected at the network interface.
- Use caution when installing or modifying communications wiring or components.
DESCRIPTION
Leviton’s QuickPort Surface Mount Housings are field-configurable for most QuickPort Snap-in connectors and adapters. The housing features port identification windows, and the ability to snap an optional security screw to prevent removal of the cover. (Screw not included)
INSTALLATION
- Noting the port side and the cable entry side of the base, use double back tape, self-adhesive hook, and loop strips, or the 1˝ screws provided to mount the base to the wall.
- Terminate the wire onto the QuickPort snap-in adapter or connector per that product’s instructions.
- Insert the connector into the housing at a steep angle, rotate, and push the connector into the base. (Figure 1)
- Swing the back part of the jack down and forward until it fully locks behind the retention ledge on the base.
Removing the jack
- Place a small flat screwdriver in the retention ledge slot on the base. Pry upward to release.
FEATURES
-
Connectivity with a QuickPort Snap-in Snap:
The enclosure is designed to accommodate Leviton’s QuickPort snap-on connectors, which makes it possible to install data, voice, audio, and video connections in a manner that is both straightforward and adaptable. -
Mounting on the surface:
The housing has been designed for applications that need surface mounting, meaning that it may be readily put on walls or other flat surfaces, giving the illusion of being clean and orderly. -
Versatility:
As a result of the housing’s ability to house a variety of QuickPort connectors—including RJ45 Ethernet jacks, HDMI connectors, USB ports, audio connectors, and many more—a comprehensive selection of connectivity options is made available. -
Construction that is Rugged:
In most cases, the housing is made out of durable materials in order to provide a long-lasting function and provide adequate protection for the connectors that have been fitted. -
Multiple Ingress Points:
The 41089-4GP model typically has numerous ports, which gives you the ability to personalize the connectivity solution based on the requirements of your particular situation. -
Variations in Color:
It is common practice for Leviton to offer a variety of color options for their surface mount housings. This gives you the ability to coordinate the housing with the color scheme of your room or your network. -
Simple and quick assembly:
It is common practice for the housing to come with pre-drilled mounting holes and mounting hardware, making the assembly of the housing quite uncomplicated.
It is important to keep in mind that the features and specifications of a product may be modified over time. Because of this, I suggest that you check the Leviton website or contact their support in order to obtain the most recent information regarding the Leviton 41089-4GP QuickPort Surface Mount Housing.
PRECAUTIONS
Take into consideration the following typical safety measures:
-
Security in Electrical Systems:
In order to prevent injuries caused by electrical shocks or mishaps, be sure that the power is turned off and disconnected before installing or handling any electrical components. -
Compatibility:
Make sure that the connectors and modules that will be used with the housing are compatible with the QuickPort system and are appropriate for the applications that will be using the housing. -
Correct Installation:
-
Be sure to mount the surface mount housing correctly by carefully following the directions provided by the manufacturer. Make sure it is affixed to the wall or surface in a way that is both secure and safe.
-
Administration of Cables:
-
To prevent interference, signal deterioration, or unintentional disconnections, you should take special care to manage and organize the wires in the housing in an appropriate manner.
-
Considerations Regarding the Environment:
Make sure that the housing is installed in an appropriate location, one that is free from extreme heat, moisture, and any other factors that could potentially be harmful. -
Roughness and Garbage:
It is important to ensure that the housing and the connectors are clean and clear of any dirt, debris, or other pollutants that may have an effect on the performance of the connections. -
Take care not to overload:
If you overload the housing with connectors over its specified capacity, you run the risk of compromising the installation’s ability to work as intended and its level of safety. -
Use Correctly:
Make use of the surface mount housing for the purpose it was designed for and within the parameters of the operating conditions it specifies. -
Installation Done by Professionals:
If you do not have experience with electrical installations or network configurations, it is recommended that you seek the assistance of a professional for the installation and configuration of the system. -
Ongoing Quality Control:
It is important to perform routine checks on the surface mount housing as well as the connectors to ensure that they are in good shape and are operating correctly.
Always refer to the product’s user manual or paperwork if you need particular precautions and instructions pertaining to the Leviton 41089-4GP QuickPort Surface Mount Housing. If you follow the guidelines given by the manufacturer, you will help ensure a secure and dependable installation.
Leviton and Leviton Block & Design are trademarks of Leviton Manufacturing Co., Inc. and are registered trademarks in many countries throughout the world.
© 2012 Leviton Manufacturing Co., Inc.
- Customer Support: 800.824.3005
- International: +1.425.486.2222
- Web: www.leviton.com
FREQUENTLY ASKED QUESTIONS
What is the Leviton 41089-4GP QuickPort Surface Mount Housing used for?
The Leviton 41089-4GP QuickPort Surface Mount Housing is used to mount and organize various data, voice, audio, and video connections in surface-mount applications.
What connectors does the housing support?
The housing supports Leviton's QuickPort snap-in connectors, which can include RJ45 Ethernet jacks, HDMI connectors, USB ports, audio connectors, and more.
Can the housing be used for residential and commercial applications?
Yes, the Leviton 41089-4GP Surface Mount Housing is suitable for both residential and commercial applications.
Is it suitable for indoor and outdoor use?
The Leviton 41089-4GP housing is typically designed for indoor use. If you need an outdoor solution, you may need to consider other products designed for outdoor installations.
What are the available color options for the housing?
Leviton often provides different color options for their surface mount housings, allowing you to match the housing to your room's decor or network color coding.
Can the housing accommodate other brands' snap-in connectors?
While the housing is designed for Leviton's QuickPort connectors, some other brands' snap-in connectors might also fit, but it's best to use Leviton- approved connectors for optimal compatibility and performance.
How do I install the Leviton 41089-4GP housing?
The housing typically comes with pre-drilled mounting holes and mounting hardware, making it straightforward to install. Follow the included instructions or the manufacturer's guidelines for proper installation.
What tools do I need for installing the housing?
The specific tools required may vary depending on the installation scenario, but typical tools might include a screwdriver, level, drill, and appropriate mounting hardware.
Can I use the housing for audio/video applications?
Yes, the housing is designed to support various audio and video connectors, making it suitable for audio/video applications.
Is the housing compatible with shielded connectors?
Yes, the housing should be compatible with both shielded and unshielded QuickPort connectors, but be sure to check the specific product specifications to confirm.
Can the housing be painted to match the wall color?
Yes, the surface of the housing is generally suitable for painting, so you can match it to the color of the wall or surface where it will be installed.
Is the housing UL-listed for safety?
The Leviton 41089-4GP housing is usually UL-listed, ensuring it meets safety standards.
Can I use the housing in a structured cabling system?
Yes, the QuickPort system is often used in structured cabling installations to create a reliable and organized network infrastructure.
What is the material used for the housing construction?
The housing is typically constructed from sturdy materials like plastic or metal to ensure durability.
Can I use the housing for outdoor Ethernet connections?
The Leviton 41089-4GP Surface Mount Housing is designed for indoor use. For outdoor Ethernet connections, consider using outdoor-rated enclosures.
Download the PDF Link:Leviton 41089-4GP QuickPort Surface Mount Housing Instruction Manual