INSIGNIA NS-LED4W18 LED Tape Light User Guide
- June 13, 2024
- Insignia
Table of Contents
INSIGNIA NS-LED4W18 LED Tape Light
Product Information
Product: LED Tape Light NS-LED4W18
Package Contents: LED Tape Light, USB power adapter (not included)
Features:
- LED Cut light strip line
- Light controls
- USB Wire connector
- Brighten lights
- Turn on/off
- Dim lights
- About 1.3 in. (3.3 cm) apart cutting line
Product Usage Instructions
Before using your new product, please read these instructions to prevent any damage.
- Peel the adhesive backing off the lights.
- Adhere the lights where you want them.
- Attach the double-sided tape to the back of the light.
- Connect the USB connector to your TV, computer, or other USB power source.
- Use the light controls to adjust the brightness. There are eight light levels.
Warning: Do not cut the silver solder markings. Only cut in the center of the copper-colored pads, as shown.
Specifications
Please visit www.insigniaproducts.com for detailed specifications.
Troubleshooting
If you encounter any issues with the product, please refer to the troubleshooting section on the website or contact Insignia customer service.
Safety Information
Ensure to follow all safety guidelines mentioned in the user manual for safe usage of the product.
One-Year Limited Warranty
The product comes with a one-year limited warranty. For more information, visit www.insigniaproducts.com.
Contact Insignia
For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico). You can also visit www.insigniaproducts.com for further assistance.
PACKAGE CONTENTS
- LED tape light
- Double-sided tape
- Quick Setup Guide
FEATURES
- Premium white LEDs produce bright, natural light
- Multi-step dimmer adjusts to the brightness level you want
- Self-adhesive backing attaches to TVs, cabinets, or other spaces for quick, custom lighting
- Reduces eye strain from TVs and monitors while enhancing image contrast
- Lights powered through USB (on your TV or computer) or with a USB power adapter (not included)
Before using your new product, please read these instructions to prevent any damage.
USING YOUR TAPE LIGHT
Shortening your tape light
- Use a pair of scissors to cut on a cut line. Cut lines are about 1.3 in. (3.3 cm) apart.
Warning: Do not cut the silver solder markings. Only cut in the center of the copper-colored pads, as shown.
Attaching your lights
- Peel the adhesive backing off the lights, then adhere the lights where you want them.
- Attach the double-sided tape to the back of the light control, then adhere it where you want it. (optional)
Connecting to power
- Place the tape light where you want it, then connect the USB connector to your TV, computer, or other USB power source.
Adjusting the lights
Note: Tape light will retain the last brightness setting used when turned
off, then back on.
- Press (POWER) to turn the tape light on and off.
- Press (BRIGHT) or (DIM) to increase or decrease the brightness. There are eight light levels.
SPECIFICATIONS
- Input: 5V DC, 1A
- Minimum specifications for USB power supply (not included): 5V DC, 0.5A (1.0A or greater recommended)
- Length: 4 ft. (1.2 m)
TROUBLESHOOTING
LEDs will not turn on.
- Press the power button to make sure your light is turned on, then press (BRIGHT) to increase the brightness.
- Make sure that your lights are connected to a working USB port or power outlet. If connected to a computer, turn on your computer.
LEDs flicker or turn on and off.
- Make sure that your lights are plugged into a working power outlet or USB port. Try plugging into a different power source.
- Make sure that the cable is not damaged.
SAFETY INFORMATION
- To avoid damage to the light strip, do not twist or bend the light strip 90° sharply.
- Do not cut the silver solder markings. Only cut in the center of the copper-colored pads.
- Do not plug in your lights when they are coiled. This cangenerate excess heat which can damage the product or connected device.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call
1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>