AC INFINITY AC-CBD632 CLOUDLAB 632D 60 Inch Advance Grow Tent User Manual

AC INFINITY AC-CBD632 CLOUDLAB 632D 60 Inch Advance Grow Tent

WELCOME
Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service. If you have any questions or suggestions, please don’t hesitate to contact us. Visit www.acinfinity.com and click contact for our contact information.
EMAIL
support@acinfinity.com
WEB
www.acinfinity.com
LOCATION
Los Angeles, CA

Product Features

• HIGH-DENSITY CANVAS
  Mylar canvas with 2000D density rating to be 100% external lightproof. Diamond-patterned interior lining amplifies reflectivity.

• VIEWING WINDOW
  Clear and adjustable window offers you a snapshot of the interior without compromising your environment.

• DUCTWORK ACCESS
  Double cinching ports secure your flexible ducting tubes on both sides of the tent to streamline airflow routing.

• HEAVY-DUTY FRAME
  Thick 22mm steel tubes and connectors provide the tent with a sturdy structure. Can carry fans and lights up to 150 pounds.

• CONTROLLER PLATE
  Steel plate designed to mount fan and lighting controllers. Their cords can enter the tent securely through the plate’s opening.

• SPILL TRAY
  Reflective waterproof lining that catches water, soil, and other debris to prevent leakage in the grow tent.

PRODUCT CONTENTS

Product Usage Instructions:

1. Start by unpacking the product contents as listed above.
2. Refer to pages 10-14 and 27-29 of the user manual for setup instructions specific to your model.
3. Assemble the frame poles according to the instructions provided. The number and configuration of the poles vary based on the model.
4. Attach the canvas to the frame using the provided straps and screws.
5. If applicable, mount the controller plate on the designated area of the tent for fan and lighting controllers.
6. Place the spill tray inside the tent to catch water, soil, and debris.
7. Secure the tent to a wall using the included wall screws, if desired.
8. If applicable, set up the drying rack according to the instructions provided.

If you have any further questions or need assistance, please contact AC Infinity via email at support@acinfinity.com or visit their website at www.acinfinity.com.

MANUAL CODE CL2106X1

TENT SETUP

TENT SETUP CLOUDLAB 422 / 632 / 642 / 722 / 733 / 844 / 866

• STEP 1
  Insert the eight (A) poles and into the floor end of the corner (D1) pieces to create two bases.
  When assembling, make sure the feet of each corner (D1) piece faces the floor with the arrow facing down.
  NOTE: Poles in models AC-CBA632 and AC-CBA642 are labeled A1 & A2.

• STEP 2
  Insert the four (B) poles into Base One. Insert the four (C) poles into Base Two.

• STEP 3
  Unzip the tent so that three of the walls lay flat.

• STEP 4
  Guide Base One into the floor of the tent, making sure its corners meet the tent’s corners.

• STEP 5
  Insert the poles of Base Two into the poles of Base One to complete the frame.
  *Two people is recommended for this portion of the tent assembly.

• STEP 6
  Pull the roof over the assembled frame.
  *Two people is recommended for this portion of the tent assembly.

• STEP 7
  Pull the upper and lower zippers to close the walls and door.
  *Two people is recommended for this portion of the tent assembly.

• STEP 8
  You can neatly hold the window wall open any time by using its attached Velcro strap.

• STEP 9
  Add the roof support beams (E) then (F).
  Insert the spill pool into the tent and secure the Velcro straps around the poles.
  

TENT SETUP CLOUDLAB 816 / 894

• STEP 1
  Insert six (A) poles into the floor end of the corner (D1) pieces and 3-way (D2) connectors to create the base.
  Insert the six (B) poles into the corner (D1) pieces and the two 3-way (D2) connectors.
  When assembling, make sure the feet of each corner (D1) piece faces the floor with the arrow facing down.

• STEP 2
  Insert the six (C) poles into the six (B) poles.

• STEP 3
  Insert four corner (D1) pieces into the corner (C) poles and the two 4-way (D3) connectors into the middle (C) poles.
  Insert six (A) poles in between the corner (D1) pieces and 4-way (D3) connectors.

• STEP 4
  Unzip the tent so that it lays flat.

• STEP 5
  Guide the completed frame into the floor of the tent, making sure its corners meet the tent’s corners.
  *Two people is recommended for this portion of the tent assembly.

• STEP 6
  Pull the roof over the assembled frame. Pull the upper and lower zippers to close the walls.
  *Two people is recommended for this portion of the tent assembly.

• STEP 7
  Latch both walls together in the center and pull the zipper down, making sure the front flaps are over the walls.

• STEP 8
  Add the roof support beams (E) then (F). Insert the spill pool into the tent and secure the Velcro straps around the poles.

TENT SETUP CLOUDLAB 811 / 899

• STEP 1
  Insert ten (A) poles into the floor end of the corner (D1) pieces, 3-way (D2) connectors, and 4-way (D3) connectors to create the base.
  Two of the ten (A) poles will be set in the center, attached by a third 3-way (D2) connector.
  Insert the nine (B) poles into the corner (D1) pieces and the (D2) and (D3) connectors.
  When assembling, make sure the feet of each corner (D1) piece faces the floor with the arrow facing down.

• STEP 2
  Insert the nine (C) poles into the nine (B) poles.

• STEP 3
  Insert four corner (D1) pieces into the corner (C) poles, four 4-way (D3) connectors into the middle (C) poles, and the 5-way (D4) connector into the center (C) pole.
  Insert twelve Group (A) poles in between the corner (D1) pieces and 4-way (D3) connectors.

• STEP 4
  Unzip the tent so that it lays flat.

• STEP 5
  Guide the completed frame into the floor of the tent, making sure its corners meet the tent’s corners
  *Two people is recommended for this portion of the tent assembly.

• STEP 6
  Pull the roof over the assembled frame. Pull the upper and lower zippers to close the walls.
  *Two people is recommended for this portion of the tent assembly.

• STEP 7
  Latch both walls together in the center and pull the zipper down, making sure the front flaps are over the walls.

• STEP 8
  Add the roof support beams (E) then (F). Insert the spill pool into the tent and secure the Velcro straps around the poles.

TENT SETUP CLOUDLAB 632D / 743D / 864D

• STEP 1
  Insert four (A2/A) poles in between two corner (D1) pieces and two 4-way (D3) connectors. Then insert two (C) poles to the two 4-way (D3) connectors.
  Insert an (A2/A) pole to two corner (D1) pieces and connect them to the two (C) poles to complete the base.
  Insert six (A1/A) poles into the corner (D1) pieces and the two 4-way (D3) connectors.
  When assembling, make sure the feet of each corner piece faces the floor with the arrow facing down.*(A) poles apply to model AC-CBA743D only

• STEP 2
  Insert four 4-way (D3) connectors into the four (A1/A) poles, connecting two (A2) and (C) poles between the connectors as shown here. Insert the two (B) pieces into the remaining two (A1/A) poles.
  Insert six (A1/A) poles into the four 4-way (D3) connectors and two (B) pieces .

• STEP 3
  Insert the remaining four corner (D1) pieces and two 4-way (D3) connectors into the poles.
  Insert the remaining (A2/A) poles in between the connectors as shown here.

• STEP 4
  Add a rack (G) support beam onto the shelf.

• STEP 5
  Guide the completed frame through the tent canvas, pulling the tent floor and the ceiling a little at a time so that the canvas properly envelops the frame .

• STEP 6
  Locate the Velcro strip that lines the tent interior, making sure it extends out enough to fully apply the mylar wall.

• STEP 7
  Apply the mylar wall using the interior Velcro to divide the two chambers. Press the wall firmly to avoid gaps.

• STEP 8
  Add the roof support beams (G), (E) then (F). Insert the spill pool into the tent and secure the Velcro straps around the poles. Place the drying rack on the assembled shelf. (Make sure to tie the small spill pool on top of the drying rack.)

CONTROLLER PLATE SETUP

• STEP 1
  Mount your controller onto the included bracket.
  Use the included screws to mount an AC Infinity controller. Use the Velcro adhesive to attach a non-AC Infinity controller.

• STEP 2
  Slide the controller bracket assembly into the tent straps below the logo.

• STEP 3
  Route your inline duct fan’s power connector through the opening inside and plug it into your controller.
  Plug the probe into the controller and route its cables through the opening.

MOUNTING GUIDE

CONTROLLER PLATE
This grow tent includes a steel plate with a mounting slot for AC Infinity controllers. Mount your con-troller to the corresponding areas on the plate’s slot. Route its wires through the oval opening and through the grow tent’s flap. Some controller models may contain a hidden magnet on the backside, which can stick onto this plate without screws.
To attach a non-AC Infinity controller, use the included Velcro adhesive to hold it onto the plate.

VENTILATION GUIDE

INLINE FAN AND GROW LIGHT
First hang your inline duct fan to be use as an exhaust fan by the roof support beams. Position the intake fan at the bottom end so the intake air will be passive through the bottom vents. If you are installing a carbon filter inside, use the included straps to hang the carbon filter.
Then install your grow light. You may use rope clip hangers to install these products.
DOUBLE-SIDED CINCHES
Install any necessary duct tubes onto the ducting ports. Use the cinches on either end to secure the duct tubes onto the grow tent.
INTAKE HOLES
Introduce fresh air by using one of the two ventilation holes at the bottom of the grow tent. Open a passive intake screen or create active intake by attaching an additional inline fan to a duct port.

CONFIGURATION SETUP

LIGHT AND VENTILATION PLACEMENT
There are many ways to configure these components to bring airflow into your grow space. A typical setup places the fan and the filter inside, which makes it easier to manage while dampening the fan noise. Both can be situated in any order within the ventilation chain if air is being pulled out of your grow space.For example, your grow lights might get in the way of your cooling equipment. In this case, you may set the fan and/or filter outside of your grow tent.
We recommend setting your extraction fan at the highest point possible. Since heat rises to the top, exhausting that hot air at that point will make the ventilation process efficient. Your carbon filter will also perform better if it’s positioned at the highest point.

AC INFINITY PRODUCTS

• Inline Duct Fans
  The CLOUDLINE series is a line of duct fans designed to quietly ventilate AV rooms and closets, as well as various DIY air circulation and exhaust projects. Features a thermal controller with intelligent programming that will automatically adjust duct fan speeds in response to changing temperatures.

• Carbon Filters
  The duct carbon filter is designed to eliminate odors and chemicals for grow tents and hydroponic spaces. It utilizes premium grade Australian charcoal that features greater absorption power and a longer lifespan. Enables maximum airflow pass through as part of an intake or an exhaust system.

• Duct Tubes
  The four-layer ducting tube is used to direct airflow, designed for ventilation systems in applications like HVAC, dryers, and grow rooms. It is highly durable and flexible, and can be used anywhere from tight spaces to wide open areas.

WARRANTY

This warranty program is our commitment to you, the product sold by AC Infinity will be free from defects in manufacturing for a period of two years from the date of purchase. If a product is found to have a defect in material or workmanship, we will take the appropriate actions defined in this warranty to resolve any issues.
The warranty program applies to any order, purchase, receipt, or use of any products sold by AC Infinity or our authorized dealerships. The program covers products that have become defective, malfunctioned, or expressively if the product becomes unusable. The warranty program goes into effect on the date of purchase. The program will expire two years from the date of purchase. If your product becomes defective during that period, AC Infinity will replace your product with a new one or issue you a full refund.
The warranty program does not cover abuse or misuse. This includes physical damage, submersion of the product in water, incorrect Installation such as wrong voltage input, and misuse for any reason other than intended purposes. AC Infinity is not responsible for consequential loss or incidental damages of any nature caused by the product. We will not warrant damage from normal wear such as scratches and dings.
For more information about our dealers and distributors, please contact our customer service at support@acinfinity.com or 626-923-6399 Monday to Friday (9:00 am to 5:00 pm PST).
If you run into any issues with this product, contact us and we’ll happily issue a replacement or a full refund!
COPYRIGHT © 2021 AC INFINITY INC. ALL RIGHTS RESERVED
No part of the materials including graphics or logos available in this booklet may be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine readable form, in whole or in part, without specific permission from AC Infinity Inc.
www.acinfinity.com

References

• AC Infinity
• AC Infinity

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>