Tefal BL94H Infinimix Silence Speed Blender Instruction Manual

INFINIMIX + SILENCE

BL94H Infinimix Silence Speed Blender

DESCRIPTION

A. 1. LID
2. REMOVABLE SEAL
3. LOWER CAP
4. UPPER CAP
B. PLASTIC TRITAN JAR
C. 1. REMOVABLE SEAL
2. POWELIX BLADE UNIT
3. LOCKING RING
D. 1. MOTOR UNIT
2. CONTROL RING
3. START/ STOP BUTTON
E. 1. ON THE GO BOTTLE LID
2. ON THE GO BOTTLE (OTG)
3. REMOVABLE SEAL
4. ON THE GO BOTTLE BLADE UNIT
5. LOCKING RING
F. PANEL CONTROL
1. BLENDER JAR LOCK INDICATOR
2. ON THE GO BOTTLE LOCK INDICATOR
3. PULSE FUNCTION
4. SMOOTHIE PROGRAM
5. ICE CRUSH PROGRAM
6. SORBET PROGRAM
7. DESSERT PROGRAM
8. CLEAN PROGRAM
9. MANUAL SETTING
G. PUSHER
H. BRUSH

CAUTION:
The safety precautions are part of the appliance. Read them carefully before using your new appliance for the first time. Keep them in a place where you can find and refer to them later on. The appliance will only start if the assembled jar (A+B+C) or the OTG bottle (E) is correctly positioned on the motor unit (D) and the lid (A) locked on the jar (B).

BEFORE USING YOUR APPLIANCE FOR THE FIRST TIME
Before using your appliance for the first time, rinse the parts that come into contact with food (assembled jar (A+B+C) and assembled OTG (E)) with soapy water.
CAUTION : Do not immerse the appliance in water (neither the motor unit (D) nor the blades units (C, E4)). Never put the motor unit under running water. Clean it with a damp cloth and dry it carefully. The blades are extremely sharp.
Make sure all the packaging has been removed before operating the appliance.

ASSEMBLING AND FITTING THE JAR
Moisten the seal (C1) (even if already fitted on the blades unit (C2)). Be careful to correctly fit the seal (C1) back onto the blade unit (C2) the correct way up (Fig 1). Place the blades unit (C2) on the locking ring (C3) (Fig 2). Turn the jar upside down and fit the assembled locking ring (C) with blades on the base of the jar (Fig 3). Lock it by rotating to lock ring (C3) in the clockwise direction (Fig. 3). Make sure the locking ring is locked correctly: the arrow on the jar must be aligned with the arrow on the locking ring (Fig 3). To help you, you can use the back of the brush (H) to lock or unlock the locking ring (C3) Add the ingredients into the assembled jar without exceeding the maximum level indicated (Fig. 4):
• 1.75 L for thick mixtures • 1.5 L for liquid preparation

Warning : Do not pour boiling liquids (over 80°C/176°F) into the jar Lock the lid (A) on the jar (B) and turn it in the clockwise direction (Fig. 5). Make sure the lid is locked correctly: the point on the lid should be aligned with the padlock on the handle (Fig. 6). Put the assembled cap (A3+A4) in position on the lid and lock by rotating it in the clockwise direction.
If the lid is not correctly locked, your appliance will not start. Put the jar correctly on the motor unit (Fig 7): the point on the base of the jar should be aligned with the padlock on motor unit (Fig. 7). A jar logo (F1) will appear on the screen (Fig. 7) and a bip signal will sound.

ASSEMBLING AND FITTING THE ON THE GO BOTTLE
Moisten the seal (E3) (even if already fitted on the blades unit (E4)). Be careful to correctly fit the seal back onto the blades units the correct way up (Fig. 8). Add the ingredients into the bottle without exceeding the maximum level indicated (Fig.10):
• 400 ml for thick mixture • 600 ml for liquid preparation
Warning : Do not pour boiling liquids (over 80°C/176°F) into the bottle.
Put the blades unit (E3+E4) on the locking ring (E5) (Fig 9).
Place the assembled blades unit on the top of the bottle (E2) and lock it by rotating in the clockwise direction (Fig 11)
Make sure the blades unit is well locked: the arrow on the locking ring (E5) should be aligned with the arrow on the bottle (Fig. 11) Turn the OTG bottle (E) upside down and put it correctly on the motor unit (D). Lock it by rotating it in the clockwise direction until the arrow on the locking ring (E5) is opposite the padlock on the motor unit. A bottle logo (F2) will appear on the screen (Fig. 12) and a bip signal will sound.

USING YOUR APPLIANCE

bip signal will sound.
Turn the button to the right to start blending from speed 1 to 6 a bip will sound at each step.
Timer starts from 0:00 and goes up.
To pause, touch “Start/Stop” a bip will sound and the speed lights will blink.
To resume, touch “Start/Stop” 1 bip will sound and light will turn on
To stop, turn the button back to the left on position 0 or maintain “Start/Stop”
for 3 seconds, a long bip will sound. The light goes back to 0 position.
Programs| Turn the button to the left a  bip will sound for each position, a light will turn on for each position, a timer display for each program (Fig.13).
On each program position, Start/Stop light blinks.
To start a program, touch Start/Stop and 1 bip will sound (Fig.14).
To pause, touch Start/Stop a bip will sound, the program and Start/Stop lights will blink.
To resume, touch Start/Stop a 1 bip signal will sound, program and Start/Stop lights will turn on.
To stop, maintain the Start/Stop for 3 seconds long bip signal will sound and light will go back on 0 position.
Timer starts from the program time (ex : 1:30)  and counts down
To indicate the end of the program 3 bips will sound (program and Start/Stop light blink) and light will go back to 0 position
Pulse function| Turn the button to the left on the “pulse” position a bip signal will sound and Start/Stop light will blink.
Touch then hold Start/Stop to activate pulse immediately (there is no lag time between touch and the start of blending)
Release finger from Start/Stop to stop (Start/Stop light will blink)

CAUTION: After running one cycle in the blender for the maximum processing time, let the blender rest for 1 minute before operating again.
After using the blender for a maximum of three cycles, stop the appliance and leave to cool to ambient temperature (takes about 2 hours).
The appliance is equipped with overload protection. This prevents the motor from being damaged by an abnormal use.
If the appliance switches off during operation, proceed as follows:
Unplug and leave to cool down approximately 15-20 minutes.
Reconnect the appliance to the power supply and resume blending.
After approximately 3 minutes use, your appliance will start a stand by mode. To switch on / off your appliance, press the Start / Stop button.

ROUGH CHOPPING SMALL QUANTITIES
Accessory used: assembled chopper
Chop in a few seconds by pulsing (F3) : peanuts, almonds, etc…
Quantity / max time : 140g peanuts/12s or 150g almonds/8s
Programs available with the jar (B):

carrots + 100g of celeriac + 100g of
bananas + 5009 of orange juice| Default time :
1 min2Os
| Use this program to crush ice cubes into ice snow| 8 ice cubes max| Default time
40 sec
| Use this program to make ice cream : blending frozen fruits with fresh Cream or yogurt| 450g frozen raspberries + 240g milk + 75g custar
sugar. Tamper must be used to help the flow.| Default time
1 minlOs
| Use this program to make some light dough like waffle, cake, pancake, clafoutis, brownie… You cannot make heavy
dough like bread, brioche, pizza…| Yogourt cake : Add ingredients in this order on the jar. 120g yoghurt + 170g of custar sugar + 7.5g
vanilla sugar + 3 eggs +125g sunflower oil + 85g Corn flour + 65g almond powder + 140g flour + 11g
baking powder. Put the mix in a mold and bake for 50min to 180t| Default time :
1 mini Ss
| Use this program to clean your blender| 200m1 of water + 1 drop of washing- up liquid.| Default time :
30 sec

Programs available with the On The Go bottle (E)

time 40 sec
| Use this program to clean your OTG jar| 200ml of water.| Default time : 30 sec

The pulse button can still be used when no program is running.
CAUTION: Hard food may mark the inside of the jar but this does not affect the efficiency of the appliance.
Frozen food must be smaller than a walnut.
Do not add hot liquid above 80° C as it can be ejected out of the appliance due to a sudden build up of steam.

AFTER USING YOUR APPLIANCE

Unplug the appliance.
Empty the preparation, the jar is not meant for storing food in the refrigerator or freezer.
To clean the motor unit, use a damp cloth. Dry it carefully.
Never immerse the motor unit in water.
Wash the removable parts in water with few drops of washing-up liquid, immediately after use. For easy cleaning you can use the « Clean program » :
Put 200ml of water. You can add 1 drop of washing-up liquid only in the jar (B). The appliance works at various alternating speed for approximately 30 seconds.
The lid (A1), on the go bottle (E2), on the go bottle lid ( E1), and cap (A3+A4) can be cleaned in the dishwasher, but the jar (B), Powelix blades unit (C2 and E4), don’t go in the dishwasher. Don’t immerse the blades (C2 and C4) completely and for a long time. To help to clean the cap, you can disassemble it in 2 parts (Fig. 15)

WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?

a socket with the same voltage as indicated on the rating plate of the appliance.
The blender jug or OTG bottle are not positioned correctly on the motor unit.| Check that the blender jug or the OTG bottle is positioned properly on the motor
unit as explained in the instructions.
In case of software bug.| Unplug the appliance, wait a few minutes and try again.
Excessive vibrations| The product is not placed on a flat surface.| Place the appliance on a flat surface.
Volume of ingredients is too high.| Reduce the quantity of ingredient process.
Leak from the lid| Volume of ingredients is too high.| Reduce the quantity of ingredient process.
The seal is not correctly positioned.| Place the seal correctly on the lid.
Leak from the bottom of the blender jug| The blades are not correctly positionned.| Fit the locking ring (C3) (Fig 2) and lock it by rotating to lock notch in the clockwise direction (Fig. 3). Make sure the locking ring is locked correctly : the point on the jar must be aligned with the lock (Fig. 3)
The blades do not turn easily| Pieces of food too large or too hard.| Reduce the size or quantity of ingredient processed.
Leak from the bottom of the OTG bottle| The blades are not correctly positionned.| Place the blade unit on the top of the bottle and lock it by rotating to lock notch in the clockwise direction (Fig. 11)
INTERNAT ONAL GUARANTEE: COUNTRY LIST
SMALL HOUSEHOLD APPLIANCES

| | | | | | |
ARGENTINA| 0800-122-2732| EGYPT| 16622| VIETNAM| 1800-555521| OHNJA
MAKMACEEJ3DONIA| (02)20 50 319
21113LIUSIIL
ARMENIA| 010 55-76-07| EESTI
ESTONIA| 6681286| SLOVENIJA SLOVENIA| 22349490| MALAYSIA| 60378023000
AUSTRALIA| 1300307824| SUOMI
FINLAND| 98946150| ELA
LAD GR EECE| 2106371251| MEXICO| (55)52839354
OSTERREICH
AUSTRIA| 18903476| FRANCE Continentale
+ Guadeloupe.
Martinique. Reunion.
St-Martin| 974504774| IP4
HONG KONG| 81308998| MOLDOVA| 22224035
za.,..41
BAHRAIN| 17716666| DEUTSCHLAND
GERMANY| 212387400| MAGYARORSZAG
HUNGARY| 618018434| NEDERLAND
The Netherlands| 318582424
BERAPYCbARUS BEL| 172239290| ‘‘a 1g-| 24703471| INDONESIA| +62 21 5793 7007| NEW ZEALAND| 800700711
O MAN
BELGIQUE BELGIE BELGIUM| 70233159| POLSKA
POLAND| 801 300 420
koszt jak za
polaczenie lokalne| ITALIA ITALY IT| 199207354| NORGE
NORWAY| 22963930
BOSNA I
HERCEGOVINA| Info-linija za potrotate
033 551 220| PORTUGAL| 808284735| e*
JAPAN| 0570-077772| ESPARA SPAIN| 933063765
BRASIL
BRAZIL| 11 2915-4400| X4
QATAR| 44485555| Zoil,
JORDAN| 5665505| SVERIGE
SWEDEN| 86292500
612111API4R
BULGARIA| 70010330| REPUBLIC OF
IRELAND| 18774003| KA3AKCTAH KAZAKHSTAN| 7273783939| SUISSE SCHWEIZ
SWITZERLAND| 448371840
CANADA| 1-800-418-3325| ROMANIA| 213168784| KO 1,-/”01
REA| 080.733-7878| dsrtmenstu
THAILAND| 27656565
CHILE| 228844606| POCCIAR RUSSIA| 4952133230| Qi.,c,
KUWAIT| 1807777 Ext :2104| TURKIYE TURKEY| 4444050
COLOMBIA| 18000520022| 4 3,-4 aye .0 41.••11
SAUDI ARABIA| 920023701| LATVJA
LATVIA| 66163403| ;.,..,:a.> :400 “Pt
UAE| 8002272
HRVATSKA
CROATIA| 13015294| SRBIJA
SERBIA| 600732003| .’..,14
LEBANON| 4,414727| Ykpaima
UKRAINE| 443001304
CESKA REPUBLIKA CZECH REPUBLIC| 731010111| SINGAPORE| 65508900| LIETUVA
LITHUANIA| 52140057| UNITED KINGDOM| 3456021454
DANMARK DENMARK| 43350350| SLOVENSKO
SLOVAKIA| 232199930| LUXEMBOURG| 3270233159| U.S.A.| 800-395-8325
24110/2018|

Date of purchase
Product reference
Retailer name and address
Distributor stamp
8020006556

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>