tekkiwear AB0064 Q12 Smartwatch User Manual
- June 13, 2024
- TeKKiWear
Table of Contents
tekkiwear AB0064 Q12 Smartwatch User Manual
Before first use:
- Charge the battery for at least two hours.
- To switch on the device, press the “ON/OFF” button for a few seconds.
SIM card
- You must insert a SIM card to be able to use all the functions of the watch.
- Turn off the smartwatch, make sure the watch is switched off before inserting the card.
- Attention: the SIM card must not have a PIN code.
- We cannot be held responsible for possible faults due to incorrect configuration of the SIM card. incorrect configuration of the SIM card. In case of doubt, please contact your telephone your telephone company to configure the SIM card.
How to insert the SIM card
Make sure you insert the correct size SIM card.
Open the back cover of the watch to insert the SIM card, lift the battery out of the watch and insert the card in the correct orientation so that it makes proper contact with the gold pins.
Dowear APP
-
Use an Android or IOS mobile phone to scan the QR code below to download and install “Dowear APP”.
-
Register in the APP, go to the “add smartwatch” interface, scan the QR code on the back of the smartwatch to add the watch.
Product buttons
Power button / SOS
Long press (press and hold for a few seconds): to turn the smartwatch on
or off.
Short press: to turn the display on or off.
In the touchscreen area : swipe from left to right to change interface.
Touch button: to return to the previous menu.
Camera: to take photos.
Smartwatch functions
-
Aslongas you have not paired your smartwatch to a mobile phone, your smartwatch can call any number.
If you have already paired your smartwatch to a mobile phone, you must first add the contact numbers from the application, then the smartwatch can only call the numbers in the contact list. -
Contact book: after adding contact numbers from the application, these numbers will be synchronised with the contact book of the smartwatch.
-
Voice chat: click the arrows to choose the person to contact, long press the button to record voice, release the button to send a voice message, short press the touch button or power button to exit the voice chat; when voice chat messages arrive, a voice chat icon will pop up on the main interface of the watch, click that icon or 1 button to listen to the voice chat message.
-
Make friends: If the smartwatches both use Dowear APP, they can add each other to become friends.
-
Camera: click the camera to take photos, the photos will be sent to the mobile phone APP.
-
App download: use the mobile phone to scan the QR code to download the “Dowear” app, install it on the mobile phone, register the ID (the code to link the smart watch with the mobile phone), in this way you can track the location of the watch, add a contact number (up to 30 numbers), set remote shutdown of the watch, alarm, sound volume, set the time, reset the watch and other settings.
-
Flashlight: from here you can turn the torch on and off.
-
Theme: to set the pink or blue theme.
-
CID: this QR code is used to link the watch to the mobile phone APP.
-
Power off: press to turn off the smartwatch.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>