Harley Benton 256818 AC TrueTone Effect Pedal for Electric Guitar User Guide
- June 13, 2024
- Harley Benton
Table of Contents
AC TrueTone
User Guide
256818 AC TrueTone Effect Pedal for Electric Guitar
Quick Start Guide
This quick start guide contains important information on the safe operation of
the product. Read and follow the safety advice and instructions given. Retain
the quick start guide for future reference. If you pass the product on to
others please include this quick start guide.
Safety instructions
Intended use
This device is intended to be used for sound processing of signals from
musical instruments with electromagnetic pickups. Any other use or use under
other operating conditions is considered to be improper and may result in
personal injury or property damage. No liability will be assumed for damages
resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard! Ensure that
children do not detach any small parts from the product. They could swallow
the pieces and choke! Never let children unattended use electrical devices.
External power supply
The device is powered by an external power supply. Before connecting the
external power supply, ensure that the input voltage (AC outlet) matches the
voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device
and possibly the user. Unplug the external power supply before electrical
storms occur and when the device is unused for long periods of time to reduce
the risk of electric shock or fire.
Risk of fire due to incorrect polarity
Incorrectly inserted batteries may destroy the device or the batteries. Ensure
that proper polarity is observed when inserting batteries.
Possible damage by leaking batteries
Leaking batteries can cause permanent damage to the device. Take batteries out
of the device if it is not going to be used for a longer period.
Where to use the product
Never use the product
- in conditions of extreme temperature or humidity
- in extremely dusty or dirty areas
- at locations where the unit can become wet
General handling
- To prevent damage, never use force when handling the product.
- Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents.
Features
- Effects pedal for electric guitars
- Overdrive
- Analogue
- Level, Voice and Drive controls
- Low, Mid and High 3-band-EQ controls
- Power supply via 9-V block battery (not included, item no. 417473) or power adapter (not included, item no. 409939)
Controls and connections
| 1 | IN | 1/4″ jack socket to connect instruments |
|---|---|---|
| 2 | This LED lights when the effects pedal is used. When the LED is off or |
dim while the effects pedal is used, the battery is exhausted and must be
replaced.
3| TRUE BYPASS| Foot switch for enabling or disabling the pedal function
4| OUT| 1/4″ jack socket to connect an amplifier
5| DC 9V| Connection for the external power supply with 9 V DC.
When an external power supply is used, the battery supply is cut off
automatically.
6| LOW| Turn this control to set the low frequencies.
7| MID| Turn this control to set the mid frequencies.
8| HIGH| Turn this control to set the high frequencies.
9| LEVEL| Turn this control to set the output level.
10| VOICE| Sets the frequency response and distortion. In combination with
[DRIVE], it can simulate many kinds of amplifiers.
11| DRIVE| Turn this control to set the degree of distortion.
Technical specifications
| • Input connections | Socket for connecting a power adapter 1/4″ jack socket |
|---|---|
| • Input impedance | 1 MΩ |
| • Output connections | 1/4″ jack socket |
| • Output impedance | 1 kΩ |
| • Current consumption | 3.8 mA |
| • Power supply | External power adapter, 100 – 240 V ~ 50/60 Hz |
| • Power adapter | Secondary current 200 mA |
Secondary voltage 9 V ****
Polarity centre negative
• Battery| 9-V block battery
• Degree of protection| IP20
• Dimensions (W × H × D)| 97 mm × 55 mm × 120 mm
• Weight| 390 g
• Ambient conditions| Temperature range 0 °C…40 °C
Relative humidity 20 %…80 % (non-condensing)
A detailed user manual is available to download on the product website on our homepage www.thomann.de.
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are
properly disposed of. Do not just dispose of these materials with your normal
household waste, but make sure that they are collected for recycling. Please
follow the notes and markings on the packaging.
Batteries must not be disposed of as domestic waste or thrown into fire.
Dispose of the batteries according to national or local regulations regarding
hazardous waste. To protect the environment, dispose of empty batteries at
your retail store or at appropriate collection sites.
This product is subject to the European Waste Electrical and Electronic
Equipment Directive (WEEE) in its currently valid version. Do not dispose of
your old device with your normal household waste. Dispose of this product
through an approved waste disposal firm or through your local waste facility.
Comply with the rules and regulations that apply in your country. If in doubt,
consult your local waste disposal facility.
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach •
www.thomann.de •
info@thomann.de
DocID: 256818_10.08.2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>