Harley Benton C-450685 SH-30 Pro Active True Tone User Guide
- June 1, 2024
- Harley Benton
Table of Contents
Harley Benton C-450685 SH-30 Pro Active True Tone
Product Information
Specifications:
- Power supply: CR2032 batteries
- Material: Environmentally friendly materials
- Weight (incl. pick-up cable and coupling):
- 130 g (item no. 450685, 580105)
- 135 g (item no. 568909)
- Ambient conditions:
- Relative humidity: 20%…80% (non-condensing)
Product Usage Instructions
Installation:
- Clean the surface of the instrument where you want to attach the pick-up.
- Clamp the pick-up into the sound hole of the instrument.
- Connect the coupling of the pick-up cable to a suitable amp using a shielded instrument cable and power on the amp.
- Attach the leather tab to the strap pin of your instrument via its hole, holding the coupling in place.
Operation:
-
The device utilizes two separate pick-up systems – one magnetic and one supported by a microphone. The microphone captures impact, strumming noises, and sound characteristics of the instrument body for a more authentic sound.
Note: For instruments with nylon strings, only the microphone signal is outputted as magnetic pick-ups work only with metal strings. -
Disconnect the instrument cable from the device’s coupling when not in use to prevent battery drainage.
-
If the output signal level decreases over time, replace the batteries. Remember the polarity when inserting two fresh CR2032
batteries.
FAQ:
-
Q: How do I know when to replace the batteries?
A: If the level of the output signal starts to drop over time, it indicates that the batteries are empty and need to be replaced. -
Q: Can I use this product with instruments that have nylon strings?
A: Yes, but note that only the microphone signal will be outputted as magnetic pick-ups work only with metal strings.
This document contains important information on the safe use of the product. Read and follow the safety instructions and all other instructions. Keep the document for future reference. If you pass the product on to others, please include this document. Contents are subject to change. Please refer to the latest version of the documentation, which is available for download at www.thomann.de.
Safety instructions
Intended use
This device serves as a pick-up for acoustic string instruments. Any other use
or use under other operating conditions is considered to be improper and may
result in personal injury or property damage. No liability will be assumed for
damage resulting from improper use. This device may be used only by persons
with sufficient physical, sensory, and intellectual abilities and the
necessary knowledge and experience. Other persons may use this device only if
they are supervised or instructed by a person who is responsible for their
safety.
Risk of injury and choking hazard for children!
Children can suffocate on packaging material and small parts. Children can
injure themselves when handling the device. Never allow children to play with
the packaging material and the device. Always store packaging material out of
the reach of babies and small children. Always dispose of packaging material
properly when it is not in use. Never allow children to use the device without
supervision. Keep small parts away from children and make sure that the device
does not shed any small parts (such as knobs) that children could play with.
Incorrect handling of lithium batteries can result in injury!
In the event of a short circuit, overheating or mechanical damage, lithium
batteries can cause severe injuries. Handle lithium batteries in a correct and
professional manner. Store lithium batteries in a cool and dry place in their
original packaging. Keep lithium batteries away from sources of heat. Never
open lithium batteries. Only charge rechargeable lithium batteries with a
suitable charger. Remove the lithium batteries before disposing of the device.
Cover the poles of used lithium batteries with adhesive tape to prevent short
circuits. Electrolyte can escape from damaged lithium batteries. Put the
damaged lithium battery in air-tight packaging. Collect the electrolyte with
absorbent paper. Wear rubber gloves while doing so.
Risk of fire due to incorrect polarity!
Incorrectly inserted batteries may cause fires and destroy the device and the
batteries. Observe the markings on the batteries and on the device. Ensure
that proper polarity is observed when inserting batteries.
Possible damage due to leaking batteries!
Batteries can leak and cause permanent damage to the device. Remove the
batteries from the device if it is not going to be used for an extended period
of time.
Damage to the device if operated in unsuitable ambient conditions!
The device can be damaged if it is operated in unsuitable ambient conditions.
Only operate the device indoors within the ambient conditions specified in the
“Technical specifications”. Avoid operating it in environments with direct
sunlight, heavy dirt and strong vibrations. Avoid operating it in environments
with strong temperature fluctuations. If temperature fluctuations cannot be
avoided (for example after transport in low outside temperatures), do not
switch on the device immediately. Never subject the device to liquids or
moisture. Never move the device to another location while it is in operation.
In environments with increased dirt levels (for example due to dust, smoke,
nicotine or mist): Have the device cleaned by qualified specialists at regular
intervals to prevent damage due to overheating and other malfunctions.
General handling
- To prevent damage, never exert force while operating the device.
- Never immerse the device in water. Wipe only with a clean and dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents
- When the device is not in use, disconnect the plug from the chassis coupling of the device to prevent unnecessary draining of the battery.
- Not suitable for guitars with nitro lacquer or shellac. If left on instruments with a polyester finish, the lack of light irradiation at the mounting point can cause light-related discolouration on the instrument.
Features
- Sound hole pick-up for acoustic guitars
- Active, noise-free design
- Magnetic single-coil pick-up (item no. 450685, 580105)
- Magnetic humbucker (item no. 568909)
- Combination of pick-up and microphone that records the body resonance
- Integrated volume and microphone control
- Balanced timbre
- High sensitivity
- 70 cm cable with 6.35 mm (1/4 inch) coupling
- Battery-powered
- Incl. adhesive (item no. 568909)
Connections and controls
- [VOLUME] | Control for overall level
- [MIC] | Control for microphone signal
- Pick-up cable
- Coupling for connecting the pick-up
- Leather attachment tab
- Batteries
Installation
- Clean the surface of the instrument in the place where you wish to attach the pick-up.
- Clamp the pick-up into the sound hole of the instrument.
- Connect coupling 1 of pick-up cable 3 to a suitable amp via a shielded instrument cable and switch on the amp.
- You can attach the leather tab 5 holding the coupling to the strap pin of your instrument via its hole.
Operation
-
The device uses two separate pick-up systems, one magnetic and one supported by microphone. The microphone also transmits the impact or strumming noises as well as the sound characteristics of the instrument body, which generates a more authentic sound stage.
Note: If the device is used on instruments with nylon strings, only the signal recorded by the microphone arrives at the output, because magnetic pick-ups only work on instruments with metal strings. -
Use [Volume] 1 to set the required overall volume. Use [Mic] 2 to control the share of the overall signal recorded by the microphone.
-
If you turn up [Volume] 1 and [Mic] 2 to full, this may result in feedback. In this case you should reduce the microphone volume using [Mic] 2.
-
Disconnect the instrument cable from coupling 4 of the device when not in use. This prevents the batteries 6 from being drained unnecessarily.
-
If the level of the output signal starts to drop over time, the batteries are empty and must be replaced. Remember the polarity of the inserted batteries and remove them from the battery holder. Insert two fresh CR2032 batteries with the same polarity.
Technical specifications
- Power supply 2 × Lithium button cell, 3 V, CR2032
- Operating time Max. 160 h
- Material Maple (item no. 450685, 568909) Walnut (item no. 580105)
- Dimensions (W × H × D) 107 mm × 34.5 mm × 19.5 mm
- Weight (incl. pick-up cable and coupling)
- 130 g (item no. 450685, 580105)
- 135 g (item no. 568909)
- Ambient conditions
- Temperature range 0 °C…40 °C
- Relative humidity 20%…80% (non-condensing
Environmentally friendly materials have been chosen for the packaging. These materials can be sent for normal recycling. Ensure that plastic bags, packaging, etc. are disposed of properly. Do not dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the instructions and markings on the packaging.
Batteries must not be thrown away or burnt, but must instead be disposed of in line with the local regulations on the disposal of hazardous waste. They should be returned to the manufacturer for disposal or recycled elsewhere by your local regulations. Only dispose of lithium batteries when they are empty. Remove lithium batteries from the device before disposal if this is possible without destroying it. Protect used lithium batteries against short circuits, for example by taping the poles. Dispose the built-in lithium batteries together with the device. Check for an appropriate collection facility. Dispose of the batteries and rechargeable batteries at relevant collection points or through your local waste facility.
This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) as amended. Do not dispose of your old device with your normal household waste; instead, deliver it for controlled disposal by an approved waste disposal firm or through your local waste facility. When disposing of the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste management facility. Proper disposal protects the environment as well as the health of your fellow human beings. Also note that waste avoidance is a valuable contribution to environmental protection. Repairing a device or passing it on to another user is an ecologically valuable alternative to disposal. You can return your old device to Thomann GmbH at no charge. Check the current conditions on www.thomann.de. If your old device contains personal data, delete that data before disposing of it.
Observe the disposal note regarding documentation in France.
Thomann GmbH • Hans-Thomann-Straße 1
96138 Burgebrach
www.thomann.de
info@thomann.de