Naxa NRC-191 QI Wireless Dual Alarm Clock Instruction Manual

Naxa NRC-191 QI Wireless Dual Alarm Clock

Important Safety Information

• The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous volt • age” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to a person.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
• WARNING: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
• WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including am-
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servic- ing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FCC NOTICE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason able protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in acc -or dance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION ON MODIFICATIONS **

**

Any changes or modifications not expressly approved by the grantee of this device may void the authority granted by the FCC to operate the equipment.

At a Glance

1. Clock/MEM| Press and Hold to set Time.

Press to cycle through preset stations. Press and hold to store radio preset.

---|---

• 2 DIM: Press to select dimmer level on the display. (Mid, Low, High)

3. HOUR/SKIP-| Press to adjust hour setting. (+) Press to adjust radio stations. (-)
---|---
4. MIN/SKIP +| Press to adjust minute setting. (+) Press to adjust radio stations. (+)
5. Snooze/Sleep| Press to temporarily shut off alarm for 9 minutes. In FM/AUX Mode, press to set snooze time.

(10-90 mins)

---|---
6. AL. 1/VOL-| • Press to decrease the volume.

• Press to adjust time for Alarm/Clock

7. AL. 2/VOL+| • Press to increase the volume.

• Press to adjust time for Alarm/Clock

8. FUNC / Auto- Scan| Press to toggle between FM/AUX inputs. Press and Hold to Auto-Scan stations and save first 10 into memory preset.
9. AL. OFF/ POWER| Press to power on/off (standby)

Press to turn off Alarm

10. Speakers| Dual Speakers

• 11 LED Display: LED Display panel
• 12 DC 5V Power Jack: Power Adapter port
• 13 Battery Doora: Battery door cover for 2 (AAA) batteries for time/alarm backup

15. AUX IN Jack|
---|---
16. FM Antenna Antenna Wire for FM Radio Wire
17. Qi (Wireless  Location where to place mobile

Charging) Area  phone to charge wirelessly

Connecting the Unit to Power

Before plugging in the AC/DC power adapter to the outlet, make sure that the voltage of your electric-ity supply is same as that indicated on the rating plate or power adapter.

The provided power adapter works with AC 100-240V, 50/60 Hz power.

Battery Backup

• Battery backup will preserve the current time, alarm settings in the case of power failure or interrupt-ed AC power.
• Insert (2) two UM-4 batteries (AAA) into the battery compartment. Be sure to observe the proper po-larity (the “+” and “-” signs) as indicated inside the battery compartment.

Setting the Clock

1. Connect the AC power adapter to a wall outlet. The LED Display will illuminate

2. Press and Hold for 2-3 seconds the CLOCK/ MEM button, the hour digit will flash.

3. Press the Hour/SKIP- to adjust the Hour. Press the MIN/SKIP- to adjust the Minutes.

4. Press and the CLOCK/ MEM button again to confirm the time setting.
   12-Hour / 24-Hour Mode
   Press the SET/MEM button 3 times, “12H” or “24H” will display. Press the or buttons repeatedly to set the 12 or 24 hour format.
   Take note of the PM LED indicator when setting the time.

5. Press the SET/MEM button repeatedly until the actual time appears on the display to exit.

Setting the Alarms

With the unit in Clock mode:

1. Press and Hold for 2-3 seconds the AL.1/VOL- button as the Alarm time will flash.
2. Press the HOUR/SKIP- & MIN/SKIP+ buttons to adjust the alarm time.
3. Press the AL. 1/VOL- button again to confirm the alarm setting.
4. After alarm has been set, press the AL.1/VOL- button to toggle between alarm settings to Buzz, Radio, or OFF as illustrated in the chart below.

AL. 1

Radio| “FM” indicator will illuminate next to AL. 1
OFF| AL. 1 indicator will remove from display

Alarm 2 Settings:

With the unit in Clock mode:

1. Press and Hold for 2-3 seconds the AL.2/VOL+ button as the Alarm time will flash.
2. Press the HOUR/SKIP- & MIN/SKIP+ buttons to adjust the alarm time.
3. Press the AL. 2/VOL+ button again to confirm the alarm setting.
4. After alarm has been set, press the AL.2/VOL- button to toggle between alarm settings to Buzz, Radio, or OFF as illustrated in the chart below.

AL. 2

Radio| “FM” indicator will illuminate next to AL. 2
OFF| AL. 2 indicator will remove from display

SNOOZE **

**

Press the SNOOZE button when the alarm is sounding to stop the alarm and have it sound again automatically after 9 minutes.

Snooze will temporarily disable the alarm for 9 minutes at a time up to 60 minutes.

Turning OFF the Alarm

How to Set the SLEEP TIMER

Press the AL. OFF/POWER button to turn the alarm OFF. How to Set the SLEEP TIMER In Radio or AUX playback mode, press and hold the SNOOZE/SLEEP button until the sleep timer appears on the display to activate the sleep function. Press the SNOOZE/SLEEP button repeatedly to set the sleep timer from 10 – 90 minutes. After 5 seconds, the sleep timer will auto confirm and set. To turn off the sleep timer before time is up, press and hold the SNOOZE/SLEEP button to display the remaining time and press the AL. OFF/POWER button to disable the sleep timer.

DIMMER

Press the DIM button repeatedly to set the brightness level of the display. (Middle, Low, High). Default setting is High.

Listening to the Radio

• Press the AL.POWER button once to access the Radio input. The radio station number will display on the screen. (87.5 – 108)
• P ress and hold the FUNC/Auto-SCAN button to engage the auto search and store to cycle through various radio stations and store into preset memory.
• If reception is poor, short press the Hour/SKIP- and MIN/SKIP+ buttons to fine tune your desired radio station.

Press the AL. 1/VOL- or AL. 2/VOL + buttons to adjust the volume. (Min. V00 – Max. V16)

Radio Station Preset

1. While in Radio Mode, press and hold the CLOCK/MEM button as “P01” will flash on the display.
2. Press the HOUR/SKIP- or MIN/SKIP- buttons  to select which preset number you want to store the selected radio station. (P1 – P10)
3. Press the CLOCK/MEM button to confirm and store.
4. Once completed with your presets, short press the CLOCK/MEM button to cycle through the pre-set stations as they will display as “P01-P10”.
5. Press the CLOCK/MEM then HOUR/SKIP- / MIN/ SKIP+ to cycle through the stored presets.

You can also press the CLOCK/MEM then HOUR/SKIP- or MIN/SKIP+ buttons to cycle through the stored presets.

BUILT-IN QI WIRELESS CHARGER

1. Place a Qi supported mobile device on the center of the charging surface as illustrated below. The Qi inidicator light will display and your mobile device should begin charging.
2. When charging has completed, please remove the mobile device from the unit.

Check the mobile device’s charging status using the charging icon displayed on the screen.

BUILT-IN USB CHARGER

1. Connect the USB plug from the external USB device to the USB Charger port at the back of the unit.
2. Unit should begin to charge.
3. When charging has completed, please remove the mobile device from the unit.

AUX IN MODE

1. Connect the AUX cable from the output jack of your MP3 player or mobile phone to the AUX input jack on the Radio.
2. Press the /MODE button twice to access the AUX input. AUX will be displayed on the screen.
3. Adjust the volume on both your MP3 player or mobile device and on the unit to your desired level.

Specifications

Accessories

• 1 x Owner’s Manual
• 1 x AC/DC Adapter ( Input: AC 100~240V, 50/60 Hz, 0.5A Output : DC—5V, 2000 mA)

Specifications are subject to change without prior notice.

Support

If you have problems with your device, please re-view the instructions in this manual. Please also visit us on the web at www.naxa.com to get the latest news, alerts, and documentation for your device. For additional assistance, please contact Naxa Technical Support.

NAXA Technical Support

2320 East 49th St. Vernon, CA 90058

• 866-411-6292
• http://www.naxa.com/naxa_support/

FREQUENTLY ASKED QUESTIONS

What are the main features of the Naxa NRC-191 QI Wireless Dual Alarm Clock?

The main features of the Naxa NRC-191 include wireless QI charging, dual alarm functionality, digital clock display, and FM radio.

How does the wireless QI charging work on the NRC-191?

The NRC-191 has a built-in QI wireless charging pad on the top of the clock, allowing you to charge compatible devices by simply placing them on the charging area.

Can I charge multiple devices simultaneously using the wireless QI charging feature?

The NRC-191 QI Wireless Dual Alarm Clock typically supports charging one QI- compatible device at a time on the charging pad.

Does the clock have a battery backup for the time settings in case of a power outage?

Yes, the NRC-191 usually comes with a battery backup feature, which maintains the time and alarm settings during power outages.

How many alarms can I set on the Naxa NRC-191?

The NRC-191 allows you to set and customize two separate alarms.

Can I wake up to the FM radio instead of an alarm sound?

Yes, the NRC-191 has an FM radio feature, and you can set it as the alarm sound.

How many FM radio stations can I preset on the NRC-191?

The number of preset FM radio stations may vary, but it commonly allows you to preset several radio stations for easy access.

Does the NRC-191 have adjustable display brightness for nighttime use?

Yes, the Naxa NRC-191 typically comes with adjustable display brightness levels to suit your preferences, including a dimmer setting for nighttime use.

Is the clock display in 12-hour or 24-hour format?

The NRC-191 can usually be set to display time in either a 12-hour or 24-hour format.

Can I use the Naxa NRC-191 as a bedside reading light?

While the NRC-191 has a clock display, it may not be designed specifically as a bedside reading light.

Does the NRC-191 have a snooze function for the alarm?

Yes, the Naxa NRC-191 typically comes with a snooze function, allowing you to snooze the alarm for a few extra minutes of sleep.

What type of devices can I charge using the wireless QI pad?

The wireless QI charging pad on the NRC-191 is designed to charge compatible smartphones, smartwatches, and other QI-enabled devices.

Does the NRC-191 have a built-in thermometer or weather display?

The NRC-191 is primarily an alarm clock and charging station and may not include a built-in thermometer or weather display.

Is there a built-in USB port on the Naxa NRC-191 for charging devices that don't support wireless QI charging?

Some versions of the NRC-191 may come with an additional USB charging port for non-QI-enabled devices.

Can I use the NRC-191 with Bluetooth devices to play music?

The Naxa NRC-191 is primarily an FM radio alarm clock with wireless QI charging and does not typically support Bluetooth connectivity for music playback.

DOWNLOAD THE PDF LINK:Naxa Electronics NRC-191 Dual Alarm Clock QI Wireless Charging Instruction Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>