Bertazzoni DW24T3IXV Built In Dishwasher Installation Guide
- June 13, 2024
- Bertazzoni
Table of Contents
Bertazzoni DW24T3IXV Built In Dishwasher Installation Guide
PRODUCT DIMENSIONS
CUTOUT DIMENSIONS
with vertical side trims installed
without vertical side trims
*** For a flush installation, a minimum inset depth of 22 1/2” (570) is required.
ELECTRICAL & WATER CONNECTION
A properly-grounded, horizontally-mounted electrical receptacle should be
installed according to this drawing.
To connect the water mains to the water inlet valve thread, use a 3/8” water
inlet hose and 3/4” metal adapter with a length of 60” (1524) (not supplied).
Connections placement must be located on either side of the cutout
Dimensions in parentheses are millimeters unless otherwise specified
INSTALLATION REQUIREMENTS
Follow local codes & ordinances for drain requirements. Install a waste line with an air gap (not supplied) or, alternatively, at least 30” (762) high drain loop to prevent backflow. Drain hose is 74” (1880) long. Drain hose must be connected at minimum 20” (508) from the floor.