SNAILAX SL-5K836 Shiatsu Foot Massager User Manual

June 5, 2024
SNAILAX

SNAILAX SL-5K836 Shiatsu Foot Massager User Manual
SNAILAX SL-5K836 Shiatsu Foot Massager

Instruction

Thank you for purchasing SNAILAX foot and calf massager.
With normal care and proper treatment, it will provide years of reliable service.
Please read all instructions carefully before using this product.
Please retain this manual for future reference.

FEATURES
  • 3 massage techniques combinated: kneading, vibration & compression
  • 3 Preprogrammed massage modes
  • Optional heat function for insteps
  • 3 levels of massage intensity
  • Detachable and washable foot sleeve
  • A timer of 15 minutes to auto shut of
CONTENTS

CONTENTS

TECHNICAL DATA

Measurements: 15.5X9.9X17.7 inches
Weight: 8.8lbs
Voltage:
Input: AC 100-240V ~50/60Hz
Output: 24VDC 1.5A
Nominal Power: 36W
Automatic runtime: 15 minutes

Setup and Operation

  1. Please place the product on the flat floor.

  2. Connect the adapter cable to the corresponding port on the massager.
    Setup and Operation

  3. Plug the home adapter into electrical outlet ( the adapter is safe to use with both 110-120V & 220-240V )

  4. Turn on the device through operating control panel (instructions on page 4).

  • Before plug ,please check and make sure the power cord is undamaged.
  • Do not use the wet hand to plug in the adapter.
  • Please don’t use the product by standing posture or put any heavy object on the product to avoid any broken caused.
  • Please don’t stand or seat on the product.
  • When moving the product, please don’t pull the power cord or drag the product directly to avoid any damaged caused.
  • Please don’t let children and pets play the products for preventing any accident happened.
  • Do not use the wet hand to pull out the power cord in order to avoid any electric shock.
  • Do not use this product in damp environment to avoid electric shock.
  • Please choose a chair with desired height and be seated, then put your feet on the product.
  • Operate below control panel to get foot and calf massages.

Setup and Operation

  1. Power button: Press this button to turn on or turn off the product; After the product has been connected to the power supply, the white indicator light would flicker;
    Press this button once, then the white indicator light would remain on all along, indicating that the product has shifted to standby mode.

  2. Rolling massage mode button: Press this button,then heating function,rolling massage,and air compression would be activated automatically; The heating function and air compression could be controlled independently.

  3. Heating button: Press this button to control the heating function; When the product is turned on, the default temperature for heating function is 45℃(113°℉) with red indicator light on; If you feel that the temperature is too high, press this button again.
    If the white indicator light is on, the temperature for the heating function would be 40℃ (104°F).

  4. Airbag control button: Turn on or furn off the airbag massage independently via this button.

  5. Intensity adjustment button: Press this button to adjust intensity of airbags among 3 levels (white light for low intensity/ blue light for medium intensity/ red light for high intensity); When the product is turned on, the default intensity would be low level; If the airbag massage is turned off, this button would synchronize automatically.

Note:

  • This device will switch off automatically after 15 minutes timer run out.
  • Do not setup or use the device in a bathroom or similary wet / damp areas.

Safety Instructions


Please read the following instructions carefully before putting your massage

device into use to ensure trouble-free operation and optimum efficiency.
Please retain these instructions for further reference!

  • The device conforms to recognized technical principles and the latest safety regulations.
  • This items is NOT A TOY. Close supervision is necessary when this appliance is used by , on, or near children or disabled persons. Do not allow children to play with product .
  • Do not allow more than one person to use this product at a time.
  • The device should never be left unattended when plugged in.
  • Never use any power sources other than UL standard home adapter provided as original equipment with this massage device.
  • Any possible repairs may only be carried out by authorized expert staff.  Improper use and unauthorized repairs are not permitted for safety reasons and lead to loss of warranty.
  • Please avoid contact of the device with water, high temperatures and direct sunlight.
  • Do not damage ,process ,excessively bend ,pull hard ,twist or knot power  cord.
  • Do not use any damaged cables, plugs or loose sockets.
  • Do not use the product when the power cord is damaged.
  • In case of malfunction, disconnect immediately from the mains.
  • Misuse or incorrect use excludes any liability for damage.
  • Do not use while you sleep.
  • In order to avoid excessively stimulating the muscles and nerves, the recommended massage time should not be exceeded 15 minutes at a time.
  • Do not use this product for medical treatment.
  • During use, if you feel abnormal, please stop using this product immediately, and then consult your doctor.

We recommend that those with any of the following conditions consult a doctor before using this massage device.

  1. Those who are using electronic medical instrument imbedded in the body , such as cardiac, pacemaker etc.
  2. Those who are being treated by doctors ,especially those who feel uncomfortable.
  3. Those who are malignant tumor patients ,heart disease patients,acute patients.
  4. Women who are pregnant or menstruating.
  5. Those with osteoporosis or fracture spine.
  6. Those with skin disease or those whose skins are injured.
  7. Those whose body temperature is over 38 degrees(Febrile Phase).

Failure to observe the above instructions may constitute misuse of the product and can cause serious injury or burns.

Maintenance and Troubleshooting

  • Before cleaning, make sure the power supply is turned off and the plug has been pulled out from the socket.
  • Use a soft dry cloth to wipe the surface of the product and control panel.
  • Do not pull the power plug by damp hands.
  • Do not use water washing product ,do not spray the water or other liquids to the interior of the product.
  • Do not use corrosive cleaning agents like benzene or thinner to clean the Massager , otherwise ,the color of upholstery will fade or the Massager will crack or be eroded.
  • When product is wet ,let the product dry naturally and thoroughly.
Removable & Washable Foot Sleeve
  • Detach the sleeve and wash in machine or by hand. Allow to air dry
Maintenance
  • Make sure the power supply is turned off and the plug has been pulled out from the socket.
  • Sweep off the dust . Keep the foot massager clean and away from damp places.
  • Store the massager in a cool, dry place out of reach of children.
  • Avoid contact with sharp edges or pointed objects which might cut or puncture the cover of massager.
TROUBLESHOOTING GUIDE
Fault Solutions
There is a clattering noise in the movement This is normal caused by the

working of the motor while in use.
The massage device switches off suddenly| Device may have been in use for 15minutes.

Auto-shut off function activated. Continue using by pressing the ‘power’ button after resting the unit for 15minutes.

The massage device fails to start| Check if device has been used for more than 15mins.
If so, let device rest for 15mins before continuing. Device may require longer time to cool in warmer environments.
Check if adapter is plugged into socket.
Check if adapter output is connected to device power inlet.

  • After continuously using the massager for a prolonged period, the massager might turn off automatically due to the overheating protection feature. Please let the machine cool down for approximately half and hour before using the massager again.

Warranty

If you have any issue about the product, please feel free to contact us by sending email to [email protected] We will strive to provide the best service possible within 24 hours.

30 days unconditionally return
Snailax product can be returned to receive a full refund for any reason within 30 days.
Please contact our customers service ([email protected]), our staff will contact you within 24 hours.

90 days return/replace
Snailax product can be returned / replaced within 90 days if the product break down in the period of proper use.

12 months Warranty
If the product breaks down within 12 months in the period of proper use, customers can still seek for the relevant product warranty to get it replaced.

Attention!
No warranty will be given to any force majeure or man-made causes for a defective product, such as improper care, personal tear down and willful damage, etc.

Extend Warranty for Free

  1. Enter the following URL or scan the QR code below to find Snailax facebook page and like it, enter“Warranty” to messenger to extend your warranty from 1 year to 3 years.
    QR code
    https://www.facebook.com/snailax
    OR

  2. Send message“Warranty” and email us [email protected] to extend your warranty from 1 year to 3 years.

Have question ?

Tel: 734-709-6982
Monday-Friday 9:00AM-4:30PM

Email: [email protected]

2750 Carpenter Road,
Suite 1 B, Ann Arbor, 48108
Tel:734-709-6982
[email protected]
www.snailax.com

Logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

SNAILAX User Manuals

Related Manuals