SNAILAX MT761 Steam Foot Spa Massager User Manual

June 13, 2024
SNAILAX

Use & care manual
Steam Foot Spa Massager
MT761

Safety Precautions

Please read carefully all instructions before using the product. This instruction helps you to use the product safely and correctly to avoid any injury or property loss.
Please follow the relevant provisions of the safety precautions!
ATTENTION:
Avoid any potentially dangerous situation, otherwise, it may cause severe hurt or property loss.
WARNING!

  1. People who are insensitive to heat must be accompanied by normal person when using this device. Otherwise, it may cause burns.
  2. Please use this product only for a foot massage, do not use for medical purposes or commercial use.
  3. Please stop using it immediately if you feel pain or abnormality on your skin or body.
    The following people should not use this product.
  • Women during pregnancy or menstruation. (It may cause skin problems due to hormone imbalance.)

  • People with allergies.

  • People with skin diseases, atopic dermatitis, or sensitive skin.

  • People with skin problems, including dermatitis and severe sunburn.

  • People with skin damage, eczema, swelling, etc.
    – There is a possibility of causing skin and physical discomfort.

    1. Please hold the plastic shell parts of the power plug and the power cord connector parts to unplug them. (Do not touch any metal parts of the power plug.)
      When performing maintenance, pull out the power plug. Otherwise, it may cause an accident or even personal injury.

    2. Please turn off the power and pull out the power plug when not using this product. Otherwise, it may cause a fire.

    3. Please do a regular clean to avoid dust collection on the power plug and the power cord connector. Moisture and other factors may cause insulation failure.

    4. Please make sure to use the power cord set dedicated to this product or special power cord components purchased from its manufacturer or repair department for replacement when the power cord assembly is damaged.
      Make sure to use the special power cord component of this product. In addition, please do not use the power cord set to any other appliances. Otherwise, it may cause a fire.

    5.  Please wrap the power cord around the bottom of the product when storing it. Otherwise, the power cord may be deformed and malfunction.

    6. Please make sure that the operating voltage of this product conforms to its rated voltage.
      Make sure that the power plug is fully inserted into the household power outlet. Otherwise, it may cause fire, electric shock, burns.

    7. Please do not use this product in the following situations.

  • When the power cord or power plug is damaged or becomes hot.

  • When the plug on the household power outlet is loose.
    Do not damage, modify, excessively bend, pull or twist the power cord.
    Do not place heavy objects on the power cord, and do not squeeze the power cord.
    Do not allow pins or dirt to adhere to the end of the power cord connec-tor.
    Otherwise, it may cause fire, electric shock, short circuit, burns.

    1. Please do not plug or unplug the power plug from the household power outlet with wet hands. In addition, do not use this product with wet hands. Otherwise, it may cause electric shock or short circuit.

    2. Do not place the product near a stove or in direct sunlight.
      Do not use during lightning strikes, and pull the power plug away from the power outlet.

    3. Do not use or store this product in the bathroom or other humid places.
      Avoid placing this product near to water (such as near a bathtub). Other-wise, it may cause electric shock or fire due to reduced insulation.

    4. Do not let children use this product. Store the product out of reach of children.
      Do not let children touch the power cord. Otherwise, it may cause burns or electric shock.

    5. Do not use this product near to flammable objects, such as alcohol, thinner, gasoline, nail polish remover, spray and etc.. Otherwise, it may cause an explosion or fire.

    6. Do not put this product into water. Please use the water tank to supply water for this product, and make sure the appliance and power switch will not get wet when adding water. Otherwise, it may cause fire, electric shock, short circuit or burns.

    7. Do not drop or knock this product. If the product is damaged due to dropping or collision, please never use it again. Otherwise, it may cause electric shock or fire.

    8. Do not block the steam outlet. For example, please do not insert pins, gold wire or other gold objects or foreign objects to the steam outlet. Otherwise, it may cause an electric shock.

    9. Do not modify, disassemble or repair this product by yourself. For maintenance matters, please contact customer service. Otherwise, it may cause personal injury or fire due to abnormal operation.

    10. Do not operate the control panel with wet hands or splash water on the control panel. Otherwise, it will cause a failure function.

ATTENTION!

  1. When emptying the remaining water in the water box after use, please hold the appliance to prevent hot water from spilling on your hands. Pay attention to the high temperature of the water removal box after use. Otherwise, it may cause burns.
  2. Use only distilled or purified water. Otherwise, it may cause equipment failure, and it may cause burns in severe cases.
  3. When operating the power switch, do not touch the steam. The pedal must be placed correctly inside of the product before using the product, which prevents the steam spray port from scalding the skin. Do not tilt, shake or move this product during use or within 10 minutes after use. Otherwise, hot water may be splashed out, or a large amount of steam may be emitted from the steam outlet. Place the product on a flat place for use instead of holding by the hands.
  4. Do notimmerse the product in the water to get water, please use the water tank to add water, otherwise, it may cause an accident or product failure.
    It is forbidden to install or remove the water tank during use. During use, do not touch the steam outlet or peep into the steam outlet. Though the power is turned off, hot steam will still be emitted (about 1 minute). Therefore, please do not approach the steam outlet. Except for cleaning, do not shake the product main body when the appliance is filled with water. Do not drain water from the steam outlet. Other- wise, once water droplets accumulated at the steam outlet, hot water may be spilled when the power is turned on. Therefore, it may cause burns.
  • Do not pour hot water above 50 C to avoid scalding the skin and damage ing the product.
  • Do not use it for therapeutic purposes.
    *  This product is limited to one person, please do not use two or more people at the same time.
  • Do not use this product while drunk or unwell.
  • Do not use immediately after meals to avoid discomfort.
  • Do not wear ornaments on the feet when using the product.
  • Do stop using it immediately and consult a doctor if you feel any discomfort during the use.
  • Do not fall asleep while the product is working.
  • It is recommended to use 30 ~ 40 minutes each time.
  • Do not sit on the product to avoid injury or damage to the product.
  • In winter, please empty the water inside of the product after use to avoid freezing the parts.
  • The product should be cleaned immediately after use to avoid skin disease infection when used by others.
  • Do not drag the product on the ground or pull the power cord to move the product, which may damage the product.

This product should not be used by people with physical, sensory or mental disabilities, or those with inexperience and knowledge (including children).
A guardian who is responsible for the user’s safety must supervise and guide the use of this product. Please prevent children from treating this product as a toy, which may cause danger.

  • Please properly dispose of the packaging bag of this product to avoid accidents such as suffocation of infants and young children. Please place it out of reach of children.
  • This product should be cleaned after use to avoid the accumulation of grease and other residues.

Warning about skin:

  • Excessive use may damage the skin.
    In the beginning, this product can only be used once a day, 2 to 3 times a week. After about a month, this product can be used once a day. Please adjust the frequency and time of use according to your skin condition.

  • If skin problems occur while using the product, please stop using it.

  • Basic skincare is required after using the product. If you do not do skincare after using it, it may cause moisture in the skin to evaporate easily, resulting in dry skin.

Product Parts

  1. Control panel
  2. Add water tank
  3. Drain ke
  4. Waste water box
  5. Wire storage device
  6. Power plug
  7. Soft foot pad
  8. Flexible cover
  9. Steam outlet
  10. Water leak
  11. Add water cover
  12. Acupuncture
  13. Foot bath bag position
  14. Electric Kneading
  15. Roller

This product has undergone a strict water operation test before the package. There may have little water droplets in the appliance, which will not cause any health problems.

Preparation

  1.  Place the product on a flat surface.
    • When using, place the body on a flat, solid surface such as the floor.
    • When the product body is fluted, the water in the water tank cannot supply water to the product, therefore, steam cannot be released.SNAILAX MT761
Steam Foot Spa Massager - Fig1

  2. Take out the water tank from the product.
    • Press firmly on the water tank (image A), and when it pops out, pull out the water tank (image B).SNAILAX MT761 Steam Foot Spa Massager -
Fig2

  3. Turn and open the water tank cover.

  4. Pour water into the water tank (image C), and then tighten the water tank cover.
    • If the water tank is filled, the steam lasts about 35 minutes.SNAILAX MT761
Steam Foot Spa Massager - Fig3

  5. Install the water tank to the product (image D).
    • Put the water tank into the product body until it has a click sound.
    • When the water tank is installed into the product body, it will supply water for the product and the water in the water tank will decrease.


Attention!

  • Do not add water repeatedly to the appliance. Add water until the water indicator flash.
  • Do not let foreign objects such as dust or dander into the water tank.

Use only distilled or purified water.
Due to different water quality, it may shorten the lifespan of this product.
Therefore, we recommend to use distilled or purified water. They are generally available in supermarkets.
The following types of water cannot be used because they contain high minerals.

  • Tap water
  • Geothermal water
  • Groundwater
  • Mineral water
  • Acidic water
  • Ionized alkaline water

Do not incorporate any other substances.
Do not mix any other substances into the water, such as lotion, aromatic oil, etc.. Otherwise, it may cause burns, malfunction or shorten the lifespan of the product.

How to use

  1. Insert the power plug of the product into a household power outlet.
    • When the amount of remaining water is insufficient, the steam release method will change. This is not a malfunction.
    • If the water in the water tank is used out, steam will be stopped. Please add water in time. Please unplug the power plug if not in use.

  2. Press the power button on the operation panel to start the massage.
    • This product is controlled by touch keys, and can be operated by touching the position of each symbol on the keys (except the water indicator).

Power Button
Startup: Press it to turn on the product in standby mode. The default setting is [Rolling Massage-Low Level] [Heat -Low Level] [Timer – 10 minutes]; The corresponding indicator in the panel will be on.
Stop: Press it to turn off the machine during working mode; When the to timer expires, all massage actions and heating functions will be stopped and enter into standby mode.
Heat Button
There are three levels heat temperature to choose, which can adjust the suitable temperature. Pressing different buttons to choose desire temperature, and the corresponding light indicator is on.
(The fan continues to work for 30 seconds after turning off the heat function)
Rolling Button
The default is low-speed rolling massage speed with green light indicator is on; press the button again to turn the massage speed to high speed, the red light is on; press the button again, the rolling massage function stops and the two-color light turns off.
Timer Button
The default time is 10 minutes. During the timing, press the corresponding 10 minutes or 20 minutes button, and the time will be re-timed. When the time expires, the product is in the standby condition.
Lack of Water Indicator
When the water tank is lack of water, the heat function cannot be turned on and the buzzer sounds to remind of adding water. The indicator of water will flash 30 seconds and then be off.

  • When the amount of remaining water is insufficient, the steam release method will change. This is not a malfunction.
  • If the water in the water tank is used out, steam will be stopped. Please add water in time. Please unplug the power plug if not in use.

Foot bath bag
When using a foot bath bag, please open the cover of the foot bath bag position, and then place the bundled foot bath bag in the box.

SNAILAX MT761 Steam Foot Spa Massager - bath bag

ATTENTION!

  • In order to prevent the solid materials from blocking the pipe, be sure to use a bag or a hand-tightened bath bag to avoid blocking the leak.
  • After use, please take out the bath bag and clean the foot pedal.

After use

  1. Press the power button on the control panel to turn off all functions.
  2. Unplug the power plug from the household power socket (image ①).
  3.  Press and hold the drain key (image ②) to drain the water in the water tank.
  4. Pull out the waste water box from the product (image ③), and pour out the remaining water. Please pour out the remaining water in the water tank to ensure the product is clean. Otherwise, water marks or odors may be generated. While pressing the drain key, pay attention to the water volume of the waste water box to prevent overflow.SNAILAX MT761 Steam Foot Spa Massager - panel1
  5. Pour out the water in the waste water box (image ④). Otherwise, water marks or odors may be generated. When pouring water, hold the waste water box and avoid contact with hot water, otherwise, it may cause burns.
  6. Install the waste water box (image ⑤). Push the waste water box into the product until it clicks.
  7. Clean the foot pedal (image ⑥). Take the foot pedal out of the product and wash it with clean water.
  8. Wipe the water above the product body. When not using the product for a long time (a few weeks or more time), the water in the water tank and the product body should be completely removed. Store it after the product body is sufficiently dry.

Clean

Clean the inside of the product

  • Clean once a month.
  • In order to remove and prevent scale deposits, the appliance should be allowed to cool for at least 10 minutes after use, and then cleaned according to the following steps.

Wipe the water from the body and water tank.

  • Even after draining, there will still be remaining water in the appliance. This will not cause hygiene problems because the water will be boiled when the next time use.

Clean the product body
Do not wash or soak the product body in water.

  • Use a cloth dampened with soapy water to wipe the product body.
  • Never use alcohol, thinner, benzine or nail polish remover. Those material may cause product malfunction or cracking or discoloration.

SNAILAX MT761 Steam Foot Spa Massager - product body

Clean the power cord set

  • Clean once a month.
  • Unplug the power plug from the household power outlet, and wipe off dust, etc. with a dry cloth.

What if the add water cover’ seal ring fall out

  1. Put the sealing column into the spring, and push the index finger into the central part of the water filling cap.
  2. Gently press the outer edge of the water-filling cap seal(A), find the recessed hole under the water-filling seal ring(B), keep the sealing column floating, and insert the seal ring to make the recessed holes match.

Specification

Name Steam Foot Spa Massager
Model MT761
Rated Voltage 110V~ 60Hz
Rated Power 450W
Timer 10/20 min
Steam Temperature appr. 45°C

This product is only for home use.

FAQ

Problem Possible Reason Solution
Steam cannot use The water tank is lack of water Fulfill the add water tank

and install correctly
Product cannot turn on| Power plug is not inserted properly| Check and insert the power plug
The power button is not on| Press the power button
Product stopped working suddenly| Power off| Check the connection of power plug
Timer expires| Press the power button and reset time

If above treatment did not solve the problem, please contact customer service.

Emergency treatment

If any abnormal occurs (scorched smell, etc.), stop using the product immediately and unplug the power plug.

  • If you continue to use it in an abnormal condition, it may cause fire and electric shock due to heat, etc., please contact the customer service immediately.
  • If the red indicator light of the power supply stays on for more than 3 seconds, the product automatically enters the shutdown condition. This is an abnormality in the appliance. Please stop using it immediately, unplug the power plug, and contact our customer service.

Warranty

If you have any issue about the product, please feel free to contact us by sending email to support@snailax.com We will strive to provide the best service possible within 24 hours.
30 days unconditionally Return
Snail ax product can be returned to receive a full refund for any reason within 30 days. Please contact our customers service (support@snailax.com), our staff will contact you within 24 hours.
90 days refund/replace
Snail ax product can be returned / replaced within 90 days if the product break down in the period of proper use.
12 months Warranty
If the product break down within 12 months in the period of proper use, customers can enjoy the relevant warranty to get them replaced.
Attention!
No warranty will be given to any force majeure and man-made causes to a defective product, such as improper care, personal tear down and willful damage, etc.
Extend Warranty for Free

  1. Enter the following URL or scan the QR code below to find Snail ax Facebook page and like it, enter “Warranty” to messenger to extend your warranty from 1 year to 3 years.
    https://www.facebook.com/snailax
    OR

  2. Send message “Warranty” and email us support@snailax.com to extend your warranty from 1 year to 3 years.

Have question ?
Tel: 734-709-6982
Monday-Friday 9:00AM-4:30PM
Email: support@snailax.com

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  •  Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio / TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit is not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

2750 Carpenter Road,
Suite 1 B, Ann Arbor, 48108
Tel:734-709-6982
support@snailax.com
www.snailax.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals