RYOBI RIW18X Cordless Impact Wrench Instruction Manual

RYOBI RIW18X Cordless Impact Wrench

Product Information

The RIW18X impact wrench is designed to prioritize safety, performance, and dependability. It is intended for fastening and removing screws and bolts using an impact socket. The product is intended for consumer use only.

It is important to read and understand the instructions and warnings in the user manual before assembling, maintaining, and operating the product. The impact wrench should only be used by adults who are responsible for their actions. Failure to follow the instructions and safety warnings provided with this power tool may result in electric shock, fire, and/or serious injury. All safety warnings, instructions, illustrations, and specifications should be read and saved for future reference.

Product Usage Instructions

1. Make sure you have read and understood all the instructions and warnings in the user manual before using the impact wrench.
2. Hold the power tool by insulated gripping surfaces when performing operations where the fastener may contact hidden wiring. This will help prevent electric shock.
3. Use a clamping device to securely hold the workpiece. Unclamped workpieces can cause severe injury and damage.
4. Wear an appropriate dust control mask with filters suitable for protecting against particles from the material being worked on to prevent respiratory injury.
5. Only use the impact wrench for its intended purpose of fastening and removing screws and bolts using an impact socket.
6. Do not use the product for any other operations not specified in the user manual. Using the product for unintended purposes could result in a hazardous situation.

By following these usage instructions and taking necessary safety precautions, you can safely and effectively use the RIW18X impact wrench.

Important: It is essential that you read the instructions in this manual before assembling, maintaining and operating the product.

Subject to technical modification.

Safety, performance, and dependability have been given top priority in the design of your impact wrench.

INTENDED USE

• The impact wrench is intended to be used only by adults who have read and understood the instructions and warnings in this manual, and can be considered responsible for their actions.
• The product is intended for fastening and removing screws and bolts using an impact socket.
• The product is intended for consumer use only.
• Do not use the product for any other purpose. Use of the product for operations different from intended could result in a hazardous situation.

WARNING:  Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.

SAFETY WARNINGS

IMPACT WRENCH SAFETY WARNINGS

• Hold the power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Clamp workpiece with a clamping device. Unclamped workpieces can cause severe injury and damage.
• Dust created by operating the product can cause respiratory injury. Wear appropriate dust control mask with filters suitable for protecting against particles from the material being worked on.
• Injuries may be caused, or aggravated, by prolonged use of a tool. When using any tool for prolonged periods, ensure you take regular breaks.
• The product will restart automatically if stalled. Switch off the product immediately if it stalls. Do not switch on the product again while it is still stalled, as doing so could trigger a sudden recoil with a high reactive force. Determine why the product stalled and rectify this, paying heed to the safety instructions.
• Ambient temperature range for tool during operation is between 0 °C and 40° C.
• Ambient temperature range for tool storage is between 0 °C and 40° C.
• The recommended ambient temperature range for the charging system during charging is between 10 °C and 38° C.

ADDITIONAL BATTERY SAFETY WARNINGS

• To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.
• Ambient temperature range for battery during use is between 0°C and 40°C.
• Ambient temperature range for battery storage is between 0°C and 20°C.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national provisions and regulations. Follow all special requirements on packaging and labelling when transporting batteries by a third party. Ensure that no batteries can come in contact with other batteries or conductive materials while in transport by protecting exposed connectors with insulating, non-conductive caps or tape. Do not transport batteries that are cracked or leaking. Check with the forwarding company for further advice.

KNOW YOUR PRODUCT

1. Anvil
2. Direction of rotation selector
3. Variable speed switch trigger
4. Handle, insulated gripping surface
5. LED worklight
6. Low speed
7. Medium speed
8. High speed
9. “A” mode*
10. Mode selection button
11. Battery port
12. Belt clip
13. Belt clip screw
14. Operator’s manual
15. Battery pack
16. Charger

• The “A” mode is a mode designed to give the user greater control in application and reduce damage to the fastener or work surface by automatically shutting the tool off after the tool senses the mechanism impacting for approximately one second.

MAINTENANCE

• The product should never be connected to a power supply when assembling parts, making adjustments, cleaning, performing maintenance, or when the product is not in use. Disconnecting the product from the power supply will prevent accidental starting that could cause serious injury.
• When servicing, use only original manufacturer’s replacement parts, accessories and attachments. Use of any other parts may create a hazard or cause product damage.
• Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc.
• Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.
• For greater safety and reliability, all repairs should be performed by an authorised service centre.

SYMBOLS

• Safety Alert
• Volts
• No-load speed
• Revolutions or reciprocations per minute
• Direct current
• European Conformity Mark
• British Conformity Mark
• Ukraine Conformity Mark
• EurAsian Conformity Mark
• Please read the instructions carefully before
• starting the machine.
• Wear eye protection
• Hot surface
• Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

SYMBOLS IN THIS MANUAL

• Note
• Parts or accessories sold separately
• Speed, minimum
• Speed, maximum
• Torque, maximum
• Torque, medium
• Torque, minimum

Installation And Using Instructions

Attention

*The “A” mode is a mode designed to give the user greater control in application and reduce damage to the fastener or work surface by automatically shutting the tool off after the tool senses the mechanism impacting for approximately one second.

Product Specifications

• 18V Impact wrench
• Model: RIW18X
• Voltage: 18 V
• Coupler: 12.7 mm(1/2”)
• Switch
  • Variable speed
• No load speed
  • Speed 1: 0 – 1200 min-1
  • Speed 2: 0 – 2000 min-1
  • Speed 3: 0 – 2800 min-1
  • “A” mode: 0 – 2000 min-1
• Maximum torque
  • Speed 1: 200 Nm
  • Speed 2: 350 Nm
  • Speed 3: 700 Nm
  • “A” mode: 120 Nm
• Impacts per minute
  • Speed 1: 0 – 1000 IPM
  • Speed 2: 0 – 2600 IPM
  • Speed 3: 0 – 3800 IPM
• Breakaway torque: 900 Nm
• Weight – excluding battery pack: 1,7 kg
• Weight – according to EPTA Procedure 01/2014: 2,1 kg(1,3Ah) – 2,9 kg(9,0Ah)
• Measured sound values determined according to EN 62841:
  • A-weighted sound pressure level: LpA = 100 dB(A)
• Uncertainty K: 3 dB(A)
• A-weighted sound power level: LWA = 111 dB(A)
• Uncertainty K: 3 dB(A)
• Wear ear protectors.
• The vibration total values (triaxial vector sum) determined according to EN 62841:
  • Vibration emission value
  • Impact tightening of fasteners of the maximum capacity of the tool: ah = 10,9 m/s2
  • Uncertainty K: 1,5 m/s2
• Battery and charger
  • Compatible battery pack (not included)
  • Lithium-Ion: RB18..
  • The compatible charger (not included): BCL1418..H RC18..

WARNING

• The declared vibration total values and the declared noise emission values given in this instruction manual have been measured in accordance with a standardised test and may be used to compare one tool with another. They may be used for a preliminary assessment of exposure.
• The declared vibration and noise emission values represent the main applications of the tool. However, if the tool is used for different applications, used with different accessories, or poorly maintained, the vibration and noise emission may differ.
• These conditions may significantly increase the exposure levels over the total working period. An estimation of the level of exposure to vibration and noise should take into account the times when the tool is turned off or when it is running idle. These conditions may significantly reduce the exposure level over the total working period.
• Identify additional safety measures to protect the operator from the effects of vibration and noise, such as maintaining the tool and the accessories, keeping the hands warm (in case of vibration), and organising work patterns.

WARRANTY

RYOBI® WARRANTY APPLICATION CONDITIONS

In addition to any statutory nghts resulting from the purchase, this product is covered oy a waltanly as stated Deion.

1. The warranty period is 24 months for consumers and commences on the date the product was purchased. This date has to be documented by an invoice or other proof of purchase. The product is designed and dedicated to consumer and private use only. So there is no warranty provided in case of professional or commercial use. This warranty applies only on new products.
2. There is a possibility to extend for a part of the range of power tools (AC/DC) the warranty period over the period described above using the registration on the www.ryobitools.eu website. The eligibility of products for extended warranty is clearly displayed in stores and / or on packaging and is contained within the product documentation. The end user is required to register his/her newly- acquired products online within 30 days from the date of purchase. The end user may register for the extended warranty in his/her country of residence if listed on the online registration form where this option is valid. Furthermore, end users must give their consent to the storage of their personal data that is required to be entered online. They must also accept the terms and conditions. The registration confirmation receipt, which is sent out by e-mail, and the original invoice showing the date of purchase will serve as proof of the extended warranty.
3. The warranty covers all defects of the product during the warranty period due to faults in workmanship or material at the purchase date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages. The warranty is not valid if the product has been misused, used contrary to the instruction manual, or has been incorrectly connected to a power supply. This warranty does not apply to:
   • any damage to the product that is the result of improper or lack of maintenance
   • any product that has been altered or modified
   • any product where original identification (trade mark, serial number) markings
   • any damage caused by non-observance of the instruction manual
   • any product not displaying the CE approval mark on the rating plate
   • any product that has been attempted to be repaired by a non-authorised warranty service centre or without prior authorisation by Techtronic Industries
   • any product connected to improper power supply (amps, voltage, frequency) any damage caused by external influences (water, chemical, physical, shocks) or foreign substances normal wear and tear spare parts
   • Inappropriate use, overloading of the tool
   • use of non-approved accessories or parts
   • Power tool accessories provided with the tool or purchased separately. including but not limited to screwdriver bits, drill bits, abrasive discs, sandpaper and blades, lateral guide, etc.
   • Components (parts and accessores subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.
4. For servicing. the product must be sent or presented to a RYOBl authorized service station listed for each country in the following list of service station addresses. In some countries, your local RYOBI dealer undertakes to send the product to the RYOBI service organisation. When sending a product to a RYOBI service station, the product should be safely packed without any dangerous contents such as petrol, marked with the sender’s address and accompanied by a short description of the fault.
5. A repair/replacement under this warranty is free of charge. It does not constitute an extension or a new start of the warranty period. Exchanged parts or products become our property. In some countries delivery charges or postage will have to be paid by the sender. Your statutory rights arising from the purchase of the product remain unaffedied
6. This warranty is valid in the European Community, Switzerland, Iceland, Norway, Liechtenstein, Turkey, Russia, and the United Kingdom. Outside these areas, please contact your authorized RYOBI dealer to determine if another warranty annies

AUTHORISED SERVICE CENTRE

Any request or issue with the product can be addressed to your local authorised service centers (visit www.ryobitools.eu) or directly to: ” Techtronic Industries GmbH, Max Eyth Straße 10, 71364 Winnenden, Germany. Please state the serial number and product type printed on the label.

DECLARATION OF CONFORMITY

EC DECLARATION OF CONFORMITY

18V Impact wrench

• Brand: RYOBI | Model number1 | Serial number range2
• We declare as the manufacturer under our sole responsibility that the product mentioned below fulfills all the relevant provisions of the following European
• Directives, European Regulations and harmonised Standards 3
• Authorized to compile the technical file: 4

GB-DECLARATION OF CONFORMITY

Manufacturer: Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany

We declare as the manufacturer under our sole responsibility that the product mentioned below

• Impact wrench
• Brand: RYOBI
• Model number: RIW18X
• Serial number range: 47545501000001 – 47545501999999

fulfills all the relevant provisions of the following Regulations: S.I. 2008/1597 (as amended), S.I. 2016/1091 (as amended), S.I. 2012/3032 (as amended) and that the following designated standards have been used: BS EN 55014-2:2015, BS EN 62841-1:2015, BS EN 62841-2-2:2014, BS EN 55014-1:2017+A11:2020, BS EN IEC 63000:2018

• Vice President, Quality – Ryobi Asia
• Winnenden, Jan. 18, 2021

Authorized to compile the technical file:

• Alexander Krug, Managing Director
• Techtronic Industries GmbH
• Max-Eyth-Straße 10, 71364 Winnenden, Germany

RYOBI is a trade mark of Ryobi Limited, and is used under license.

Techtronic Industries GmbH

• Max-Eyth-Straße 10,
• 71364 Winnenden, Germany

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>