Outwell SARGAS LUX 651245 LED Light Instruction Manual

Outwell SARGAS LUX 651245 LED Light

Product Information

Specifications

• Model: 651245 (Cream White) / Model: 651246 (Shadow Green)
• Light source: LED
• Energy efficiency class: F
• Light output: Dimmable steplessly between maximum and minimum
• Input: 5V, 1.5A, 7.5W
• Class: Class 3 appliance

Product Usage Instructions:

1. Button
   The button is used to turn the light on and off.

2. Lampshade (Extended)
   The extended lampshade provides a wider spread of light.

3. Lampshade (Collapsed)
   The collapsed lampshade provides a more focused beam of light.

4. Adjustable Hanging Point
   The adjustable hanging point allows you to change the height and position of the lamp.

5. A cord with a USB Plug
   The cord with a USB plug is used to connect the lamp to a power source.

6. Edge of Lampshade
   The edge of the lampshade provides a decorative border.

7. Lamp Body
   The lamp body houses the light source and other internal components.

Frequently Asked Questions:

Q: Can I replace the light source?
A: No, the light source is not replaceable as it would compromise the construction and reduce the product’s lifetime.

Q: How do I remove the light source for testing?
A: To remove the light source for testing, follow these steps:

1. Use a flat-head screwdriver to open the four tabs and remove the lamp lens.
2. Unscrew the two screws holding the PCB with LEDs in place.
3. Cut the necessary wires to remove the required components for testing.

Q: How do I disassemble the lamp for disposal?
A: To disassemble the lamp for disposal, follow these steps:

1. Follow steps 1-2 above to remove the lamp lens and unscrew the PCB with LEDs.
2. Cut the wires and remove the screws to allow removal of the electronics on the circuit board.
3. Dispose of the electronics and remaining components according to local regulations.

Overview

Light modes

• Press the button (1.) to switch on / off the light
• Press and hold the button to dim the light. The light can be dimmed stepless to any setting between maximum and minimum light output.

Use of the lamp

• Connect the USB plug (5.) to a reliable power source.
• To extend the lantern lampshade, grab the edge of the lampshade (6.) and push the body out from the inside, do not pull on the cord. To collapse the lampshade, reverse the above.
• Hang the lamp from the hanging point, adjust the height as needed by gently moving the cord through the adjuster
• For indoor use only
• The lamp can be cleaned with a damp rag
• Do not use corrosive liquids to clean the lamp
• Do not stare into the light source

Light source LED

• This product contains a light source of energy efficiency class F.
• The light source is not replaceable. This would introduce weak points in the construction, that could reduce the lifetime of the product.

Instruction for removal of the light source by market surveillance

authorities

1. Remove the lamp lens by using a flathead screwdriver to open the four tabs

2. Unscrew 2 pcs screws holding PCB with LEDs in place

3. Cut needed wires to remove the required components for testing
   Instruction for disassembly of lamp for disposal of components when the lamp has reached the end of its usable life: – See steps 1-2 above

4. Cut wires and remove screws to allow the removal of electronics on the circuit board. Dispose of electronics according to local regulations

5. Dispose of remaining components according to local regulations

Technical data

• 5V, ,1.5A, 7.5W
• Class 3 appliance

Outwell® is a reg. trademark of Oase Outdoors ApS, EU: Kornvej 9, DK-7323 Give, Denmark, UK: One Glass Wharf, Bristol, BS2 0ZX. outwell.com. © 11/2023 Oase Outdoors ApS. Made in China.

References

• Outwell - Innovative Family Camping - buy online here

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>