Minimalosity Luminaire Modern Outdoor Linear Wall Light Sconce Installation Guide
- June 17, 2024
- Minimalosity
Table of Contents
Minimalosity Luminaire Modern Outdoor Linear Wall Light Sconce
Safety Instruction
Welcome to the world of modern lighting solutions! We are thrilled that you have selected our home lighting store, Minimalosity, to cater to your lighting needs. At Minimalosity, we strive to bring you the best lighting options that are durable, high-quality, and visually appealing. We understand that the installation process can be challenging for some of our customers. Therefore, we have prepared a comprehensive installation guide that offers step-by-step instructions to help make your installation process as easy as possible. The guide covers everything you need to know, from the tools required to safety measures to take.
In case you encounter any issues during the installation process, our customer support team is always here to assist you. Our team is friendly and knowledgeable, and we are available to answer any questions or concerns you may have. Please feel free to contact us at [email protected], and we will be happy to assist you in any way we can.
Before you begin the installation process, please ensure that you take the necessary safety precautions. Turn off the electrical power to the fixture at the electrical panel and utilize an appropriate voltage tester to ensure that there is no power present at the fixture. We strongly advise against relying solely on visual inspection to confirm that the power is off. This step is crucial to prevent any accidents and ensure a safe installation process. Keep in mind that hardwire installation does require an experienced electrician. At Minimalosity, we are confident that our installation guide is easy to follow, and we have included all the information you need to make your installation process a success. However, if you encounter any issues, we are always here to help. Our primary goal is to provide you with an exceptional customer experience, and we are committed to ensuring that you are satisfied with your purchase.
Thank you for choosing Minimalosity. Tag us on Instagram @minimalosity to be featured!
PARTS INCLUDED
- Waterproof Wire Connector
- Main LED Bar Base
- Screws (6)
- Plastic Expansion Bolts
TOOLS REQUIRED
- Power Drill
- Screw Driver
WARNING
Follow the instructions exactly
- Do not exceed the specified power supply range (applicable voltage AC 85-265 V, frequency 50/60 hz)
- Install outside must use IP65 waterproof connector wiring. The factory does not distribute. Must purchase separately.
- Refrain from immersing the lamp in water for a long time, to avoid damaging the parts of the lamp.
- To ensure your safety, please entrust a professional to check and repair.
- When an abnormal phenomenon occurs, please cut off the power quickly and contact the seller.
Installation Instructions
Be sure to cut off the power
IN CASE OF ELECTRIC SHOCK!
NOTE:
After carrying out the load-bearing test of the luminaire, then after instal
the appropriate expansion screws according to the installation site
environment.
WIRE CONNECTION:
- Blue: Neutral Wire
- Brown: Live Wire
- Yellow: Ground Wire
- First, take out the concave bracket, measuring hole spacing.
- Punch 6mm holes in the installation wall. Remove brackets (2) from the back of the light, then fix the brackets in the wall with the provided screws and expansion screws.
- Use waterproof connector wiring. First, take wires (Blue: Neutral Wire, Brown: Live Wire, Yellow: Ground Wire) from the LED wall lamp base and put them through one end of the bracket connector. Loosen the screw slightly, not on the middle piece of the connector. Place wires through and then tighten screws again to hold wires in place. Repeat this step using the opposite end of the connector and wires directly from the wall.
- Once all wiring is connected correctly, mount the LED bar with fixed screws to the bracket attached to the wall. Adjust and tighten screws on the sides of the light to each bracket accordingly.