SNAILAX SL-49A1 Handheld Mini Scalp Massager User Manual
- June 13, 2024
- SNAILAX
Table of Contents
Use & care manual
MINI SCALP MASSAGER
SL-49A1
Safety Instructions
READ ALLINSTRUCTIONS BEFORE USE.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
- ALWAYS unplug the appliance from the electrical outlet immediately after using and before cleaning.
- This items is NOT A TOY. Close supervision is necessary when this appliance is used by , on,or near children or disabled persons.
- NEVER leave an appliance unattended when plugged in.
- NEVER insert pins or other metallic fasteners into the appliance.
- Use this appliance for the intended use as described in this booklet. DO NOT use attachments not provided by SNAILAX.
- NEVER operate the appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged.
- Keep cable away from heated surfaces.
- Excessive use could lead to the product’s excessive heating and shorter life. Should this occur, discontinue use and allow the unit to cool before operating.
- NEVER drop or insert any object into any opening.
- DO NOT operate where aerosol (spray) products are being used or where oxygen is being administered.
- DO NOT attempt to repair the appliance. All servicing of this appliance must be performed by authorised SNAILAX service personnel only.
- Do not place or store appliance where it can fall or be pulled into a bath or sink. Do not place in or drop into water or other liquid.
- Do not use this product for medical treatment.
Safety Instructions
If you suffer from any of the medical conditions listed below, consult with
a doctor before using this relaxation massage device. If you: suffer from a
heart condition have a sensory disorder or pacemaker suffer from osteoporosis
or diabetes have a malignant tumor have neurological disorder or perceptual
disorder on head have fractured or head surgery of your massaging area head
skin disease and allergic dermatitis. suffering from acute diseases or are
undergoing medical treatment we advise you to consult with your doctor before
using this massager.
- Failure to follow the above may result in the risk of injury.
Troubleshooting
| Trouble | Reason/Solution |
|---|---|
| Can not start the massager | Battery Low/ Please charge it before using |
| The massager stoped abnormally | Battery runs out of power/ charge the battery |
Self-timed 10 mins is out/ restart the product
Massager slight noise| It is normal working noise of the internal mechanism
Instruction
- Built-in Lithium battery
- One control button
- 10 minutes timer
- Automatically protect function
- 3 massage modes
- Charging cable
- Ipx7 waterproof
- 3D head massage
Contents
- Mini Smart Scalp Massager
- Charging cable
- Interchangeable massage heads
- Lanyard
Technical data
Model: SL-49A1
Product Input: DC5V 1.0A
Rated Power: 5W
Automatic rutime: 10 minutes
Instructions for use
Please Make sure to relax before using this machine, Hold the device and put
the massage heads onto scalp to massage.
Assemble your desired massage heads. Four leaf grass shape massage head Use to
wash your face Lotus shape massage heads Use to massage your head and other
body part
Extend the handle by adding the lanyard to better hold the massager and enjoy
massage. 
Instructions for use
LONG PRESS …………………… Switch on and off
SHORT PRESS ………………….. Switch massage speed
The speed is: SOFT → STRONG → COMBINATION Initial speed is strong, cycle
switching
LED indicator flashes once when switching to Soft mode
LED indicator flashes twice when switching to Strong mode
LED indicator flashes three times when switching to Combination mode
Battery Charging
Connect the USB cable to any USB charger, it can be plugged in the portable
power bank, mobile phone battery chargers, laptop and any USB port. 
Before charging, ensure that the charging port, charging terminal,
charging line and product shell are dry.
The product will be in sleep mode when charging.
The light flashes quickly when battery is low
When charging, the light flashes slowly
When fully charged, LED lights up all the time
- Normally it takes about 2 hours to fully charge.
- The machine does not work when charging.
Notes and Maintenance
Notes
- It is waterproof device, you can use cleaning fluid and water to clean it ( do not sink it into water for a very long time).
- Please use dampcloth or neutral detergent to clean the product and wipe dry afterwards.
- Do not use sharp brush, sharp tool, gasoline and diesel to clean it.
Maintenance
- Please keep it into a box and keep in a safe, dry and cool place.
- Do not keep it in any place with high temperature, near fire or direct sunlight,or it may faded or damaged
- Do not contact benzene, dilient or any other corrosive liquid.
If you have any issue about the product, please feel free to contact us by
sending email to support@snailax.com We will
strive to provide the best service possible within 24 hours.
30 days unconditionally Return
Snailax product can be returned to receive a full refund for any reason within
30 days. Please contact our customers service
(support@snailax.com), our staff will contact
you within 24 hours.
90 days refund/replace
Snailax product can be returned / replaced within 90 days if the product break
down in the period of proper use.
12 months Warranty
If the product break down within 12 months in the period of proper use,
customers can enjoy the relevant warranty to get them replaced.
Attention! No warranty will be given to any force majeure and man-made
causes to a defective product, such as improper care, personal tear down and
willful damage,etc.
Extend Warranty for Free
1) Enter the following URL or scan the QR code below to find Snailax
facebook page and like it, enter”Warranty” to messenger to extend your
warranty from 1 year to 3 years. https://www.facebook.com/snailax
OR 2) Send message”Warranty” and email us
support@snailax.com to extend your warranty from
1 year to 3 years.
Have question ?
Tel: 734-709-6982
Monday-Friday 9:00AM-4:30PM
Email: support@snailax.com
FCC STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit is not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
2750 Carpenter Road,
Suite 1 B, Ann Arbor, 48108
Tel:734-709-6982
support@snailax.com
www.snailax.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>