SMART SENSOR AR816 Anemometer Instruction Manual

SMART SENSOR AR816 Anemometer Instruction Manual

A.Function:

1. Wind speed & temperature measurement.
2. Wind chill indicaton.
3. Temperature display in Celsius or Fahrenheit.
4. Different wind speed measurement unit
5. Measure wind speed in: Current/Average/ Max .
6. Low battery warning
7. LCD backlight .
8. Auto / Manual off.

B.Operation

1. Put battery into battery compartment, LCD will blink all display for a second.

2. Recover battery door, push “ MODE ” in 1 second to turn on the unit. LCD will display wind speed, temperature and battery icon. LCD backlight will lasting for 12 seconds.

3. Setting different wind measurement:
   Push “ MODE ” for 3 seconds until “ m/s ” starts to blink. Push “ SET ” to select desired measurement unit. To confirm the desired measurement unit by push “ MODE ” . Digit symbol:m/s meter per second; km/hr kilometer per hour; ft/min feet per minute; knots nautical mile per hour;mph mile per hour; Cu Current wind speed, MAX max wind speed, average wind speed.

4. switch option:Press the little conceal key on the rear cabinet to select different temperature unit.

5. Press any key will active LCD backlight for 12 seconds.

6. Measurement: when the wind vane ( impeller ) turns, LCD will instant display wind speed and temperature. When temperature below 0℃,wind chill symbol will shown on the LCD.

7. Push MODE+SET to turn off the unit.

8. Build in 14 minutes auto off Remark: Temperature switch key ( ) conceal in the rear cabinet, please use a little pushpin to press the key for conversion

C.Specifications

Wind speed range

Unit| Range| Resolution| Threshold| Accuracy
m/s| 0~30| 0.1| 0.1|

±5%

ft/min| 0~5860| 19| 39
knots| 0~55| 0.2| 0.1
km/hr| 0~90| 0.3| 0.3
mph| 0~65| 0.2| 0.2
Temperature range
Unit| Range| Resolution| Accuracy
℃| -10℃~+45℃| 0.2| ±2℃
℉| 14℉~113℉| 0.36| ±3.6℉
Battery| CR2032 3.0V
Thermometer| NTC thermometer
Operating temperature| -10℃~+45℃(-14℉~113℉)
Operating humidity| ≤90% RH
Store temperature| -40℃~+60℃(-40℉~140℉)
Current consumption| About 3mA
Weight| 52g (including battery and langyard)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>