EnPASSion EWC1W001 Apple Watch Wireless Charger User Guide
- June 12, 2024
- EnPASSion
Table of Contents
EnPASSion EWC1W001 Apple Watch Wireless Charger User Guide
ModelNo: EWC1W001
Input Power (V/A): 5V/1A
Output Power (W): 2.5W
Compatible with: Apple Watch S1-8;
Net Weight: 15g
Size: 43359mm
No-load power consumption : 25~100 mW
working frequency: 300KHz-350KHz
Operation manual
-
Plug the charging cable into the wireless charger.
-
Attach the watch to the wireless charger，and when the charging icon is displayed on the watch pane，
The watch starts charging wirelessly. -
Remove the watch from the wireless charger when charging is completed.
Notes
It is recommended that the charging ambient temperature be lower than 28 degrees Celsius, as higher temperatures can lead to a decrease in charging efficiency
Safety tips
- Do not put foreign metal objects in the charging area between the phone and wireless charger, which will lead to latent danger.
- Do not put magnetic stripe cards (such as credit cards, telephone cards, bank cards, etc.) or some medical equipment (such as pacemakers or hearing aids) together with this product, which may cause damage to the magnetic stripe or abnormal operation of the equipment.
- Do not apply heavy pressure and place it out of reach of children or animals.
- Do not disassemble, refit and repair the wireless charger by oneself, otherwise it will not be able to carry out normal after-sale service
Warranty
The warranty of this product is twelve months. Failure or damage not caused by human factors, please contact the purchasing channel or manufacture for after- sales service under warranty.
The warranty does not apply to the following:
- Damage caused by force majeure.
- Failure or damage of the product caused by human factors.
- Warranty expired
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance between
20cm the radiator your body