SSD002 Smart Sensor Devices Instruction Manual
- September 11, 2024
- Smart Sensor Devices
Table of Contents
SSD002 Smart Sensor Devices
Product Information
Specifications
- Product Name: Sensor SSD002
- Part Number: SSD002
- Screw Type: 8.2×38 mm (PH2)
Product Usage Instructions
-
Mounting Bracket Installation: Attach the
Mounting Bracket securely to the wall using appropriate
screws. -
Sensor Installation: Insert the Sensor into
the Mounting Bracket on the wall ensuring it is securely in
place. -
Power Connection: Connect the power cord to
the sensor to provide electricity.
Frequently Asked Questions (FAQ)
Q: What type of screw should be used for mounting the
bracket?
A: It is recommended to use 8.2×38 mm screws with a PH2 head for
mounting the bracket securely.
Q: How should I connect the power cord to the sensor?
A: Simply insert the power cord into the designated port on the
sensor ensuring a secure connection.
Installation Manual SSD002
Rev.A
Sensor Part Nr: SSD002
Screw recommended type: 8.2×38 mm (PH2)
1. Install the Mounting Bracket on the wall.
2. Slice the Sensor into the Mounting Bracket on the wall.
3. Insert the power cord into the sensor.