OHISOTEEL 3448-SD 16 cu ft Steel Swivel Dump Cart User Manual

OHISOTEEL 3448-SD 16 cu ft Steel Swivel Dump Cart

Product Information

Product Name: 16 cu ft STEEL SWIVEL DUMP CART
Model Number: 3448-SD
Manufacturer: Unknown
Date of Latest Revision: October 2018 (REV A 10/18)
Warranty: This product is covered by a limited warranty for three years from the date of purchase. The warranty covers defects in material or workmanship and includes free repair or replacement,excluding tires and wheels.

Product Usage Instructions

Before Using Dump Cart:

1. Apply grease to the wheels using a grease gun until grease can be seen squeezing out from both sides of the wheel.
2. Check tire pressure and inflate to 28 psi if needed.
3. Read all Safety Rules found on page 1 of the user manual.

How to Use Dump Cart:

1. Attach the Dump Cart to your tractor using the supplied hitch pin.
2. Do not exceed 1250 pounds when loading material into the cart body.
3. Distribute the weight of the load as evenly as possible in the cart body for best handling.
4. When hauling heavy loads, verify that your vehicle has adequate towing and braking capacity.
5. Do not exceed 6 miles per hour when towing the Dump Cart.

How to Empty Dump Cart:

1. Step down on the foot pedal to release the latch mechanism.
2. Swivel the cart as desired to guide the material to the preferred location.
3. Lower the body and guide the latch into the drawbar and relatch.

Note:
For detailed assembly instructions, please refer to the user manual provided with the product.

3448-SD
16 cu ft STEEL SWIVEL DUMP CART

READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT

Safety Rules

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

• Read and understand all safety rules and operating instructions before using this tractor attachment.
• Follow all safety rules and operating instructions provided by your vehicle’s manufacturer when using attachment.
• Never allow children or untrained persons to operate vehicle or attachment.
• Do not exceed the vehicle manufacturer’s towed weight limit.
• Reduce vehicle speed and allow extra stopping distance when towing heavy loads.
• Reduce vehicle speed and towed weight when operating on slopes.
• Operate up and down slopes, never across the face of slopes.
• Do not carry passengers on vehicle or attachment.
• Avoid sudden turns or maneuvers.
• Do not tow attachment on public roadways.
• Do not remove warning decals from product.
• Check product for worn, loose, or damaged parts before each use. If any damage is present, repair the product before using.
• Check product for loose or missing fasteners before each use. Tighten or replace fasteners as needed before using.
• Do not exceed vehicle speed of 6 miles per hour when towing Dump Cart.
• Do not exceed Dump Cart rated weight capacity of 1250 pounds.

Carton Contents

TOOLS REQUIRED FOR ASSEMBLY:

• Large Flat Screwdriver
• 7/16″ Wrench and Socket
• 1/2″ Wrench or Socket
• Grease Gun

Assembly Instructions

1. Place Body Halves on a smooth, flat surface so they are square and fasten together with hardware as shown.

2. Attach Front Support to Body and tighten hardware.

3. Attach Undercarriage to Body and tighten hardware.

4. Attach Front Gate to inside of Body as shown and tighten hardware.

5. Attach Corners to Body and tighten hardware.

6. Insert Axle into Undercarriage halfway as shown. Center Spacer inside Swivel Clevis and align with Axle.

7. Slide Axle completely through Undercarriage; Swivel Clevis and Spacer must be captured by Axle.
   Align Drawbar with Front Support and press down to latch.

8. Slide Washers, Spacers and Wheels onto Axle and secure with Hairpins as shown.

9. Attach Support Bar to Body behind flange loosely.

10. Attach Corner Gussets to Body and tighten all hardware.

11. Attach Latch Bars to Handle as shown. Do not tighten hardware completely; Latch Bars must rotate freely.
    Slide Grip onto Handle.

12. Slide Latch Bars into Tailgate retainers as shown. Align Handle with mounting hole on Tailgate.

13. Slide Washer between Handle and Tailgate and secure with hardware. Handle must be tight, yet free to rotate.

14. Attach Tailgate to Body as shown. Do not tighten hardware completely; Tailgate must rotate freely.

15. Slide Spring Loaded Hitch Bracket through drawbar and secure with hardware.

Operating Instructions

Before Using Dump Cart:

1. Apply grease to wheels using grease gun until grease can be seen squeezing out from both sides of the wheel.
2. Check tire pressure and inflate to 28 psi if needed.
3. Read all Safety Rules found on page 1.

How to Use Dump Cart:

1. Attach Dump Cart to your tractor using the supplied hitch pin.
2. Do not exceed 1250 pounds when loading material into the cart body.
3. istribute the weight of the load as evenly as possible in the cart body for best handling.
4. When hauling heavy loads, verify that your vehicle has adequate towing and braking capacity.
5. Do not exceed 6 miles per hour when towing Dump Cart.

How to Empty Dump Cart:

1. Step down the foot pedal to release the latch mechanism.
2. Swivel as desired to guide the material to preferred location.
3. Lower the body and guide the latch into the drawbar and relatch.

Periodic Maintenance:

• Tighten fasteners as needed before each use
• Check tire pressure before each use
• Grease wheels annually

Limited Warranty

If this product fails due to a defect in material or workmanship within THREE YEARS from the date of purchase, we will at our option repair or replace it free of charge. This warranty excludes tires and wheels, which are expendable and become worn during normal use.
This warranty does not cover:

• Repairs necessary because of operator abuse or negligence.
• Equipment used for commercial or rental purposes.
• Paint that is worn or faded due to normal use or exposure.

To arrange for product repair visit ohiosteel.com/partsstore and fill out the warranty repair form. You can also call 1-800-652-2321 to speak to our Customer Service Team, or return this product to place of purchase for replacement.
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. This warranty applies only while this product is in use in the United States.
In the space below record the purchase date of your Dump Cart.
Model Number 3448-SD
Purchase Date
Retailer/Dealer
Purchase Price
Keep this Owner’s Manual and your receipt in a safe place for future reference. After the three year warranty period all replacement parts may be ordered by calling 1-800-652-2321.

When ordering replacement parts, always give the following information:

• Product 16 cu ft STEEL SWIVEL DUMP CART
• Model Number 3448-SD
• Part Number
• Part Description

Repair Parts

48
12| 6000324| Bushing| 2| 34| 6000418| 5/16-18 Flange Lock Nut| 46
13| 6000370| 3/8-16 x 3-1/2″ Hex Bolt| 2| 35| 3000616| 5/16-18 Nyloc Nut| 2
14| 300055| 3/8-16 x 3″ Hex Bolt| 1| 36| 6000463| Long Spacer| 1
15| 300052| 3/8-16 x 3/4″ Hex Bolt| 1| 37| 6000420| 1/4-20 x 3/4″ Hex Head Bolt| 1
16| 6000305| Foot Pedal| 1| 38| 6000421| 1/4-20 x 3/4″ Carriage Bolt| 2
17| 6000309| Latch| 1| 39| 3000716| 1/4″ SAE Flat Washer| 1
18| 300075| 1/2″ USS Washer| 1| 40| 300065| 1/4-20 Nyloc Nut| 3
19| 6000368| Spring Washer| 1| 41| 300084| Hairpin Cotter, 2-5/16″| 2
20| 6000325| Latch Spring| 2| 42| 6001661| Hardware Bolt Bag| 1
21| 6000312| Swivel Clevis| 1| 43| 6000810| Kit, 1″ Wheel Bushings ( set of 4)| 1
22| 6000612| Spring Loaded Hitch Bracket| 1|  |  |  |

REPLACEMENT PARTS ORDERING

DESIGNED AND TESTED IN COLUMBUS, OHIO
MANUFACTURED IN THE U.S.A. FROM DOMESTIC AND IMPORTED COMPONENTS

www.ohiosteel.com
800-652-2321

References

• Parts Store - Ohio Steel IndustriesOhio Steel Industries
• Home - Ohio Steel IndustriesOhio Steel Industries

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>