STAIRVILLE 105454 Fog Fluids User Manual

: June 12, 2024
: STAIRVILLE

Table of Contents

STAIRVILLE 105454 Fog Fluids
Product Information
Product specifications
Product Usage Instructions
Application instructions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

STAIRVILLE 105454 Fog Fluids

Product Information

The product is a range of fog fluids designed for use with fog
machines. The different variants available are E, E-C, E-HD, E-M, F-F, RDF, PHF, PSS ZR Hazefluid, and Hazefluid Water Based. These fog fluids are specifically formulated to produce a dense and long-lasting fog effect.

Product specifications

E: Standard fog fluid
E-C : Colored fog fluid
E-HD: Heavy-duty fog fluid
E-M: Medium-density fog fluid
F-F: Fast dissipating fog fluid
RDF: Rapid dispersing fog fluid
PHF : Persistent hanging fog fluid
PSS ZR Hazefluid: Special hazefluid for ZR series machines
Hazefluid Water Based: Water-based hazefluid

Product Usage Instructions

Before using the fog fluid, ensure that the fog machine is properly set up and in good working condition.
Select the appropriate fog fluid variant based on your desired effect and machine compatibility.
Carefully remove the cap from the fog fluid container.
Pour the fog fluid into the designated reservoir of the fog machine. Do not overfill.
Close the reservoir cap securely to prevent any leakage.
Power on the fog machine and allow it to warm up according to the manufacturer’s instructions.
Once the fog machine is ready, activate the fog output using the control panel or remote control.
Adjust the fog output intensity as desired using the fog machine’s controls.
Monitor the fog fluid level in the reservoir and refill when necessary.
After use, power off the fog machine and allow it to cool down before handling or storing.
Store the fog fluid container in a cool, dry place away from direct sunlight and heat sources.

Note: Always refer to the fog machine and fog fluid manufacturer’s instructions for specific guidelines and safety precautions.

Application instructions

Professional fluid for generating quick and artificial fog, haze and show effects in the event sector, theatre and film production.
The product is a non-hazardous preparation according to the EU Directive 1907/2006 (REACH) and the EU Directive 1272/2008.
It is also non-hazardous in accordance with the national and international transportation regulations for land, sea and air transport.
The contained raw materials are the purest available.
The contained water is double distilled (AQUA BIDEST) with high chemical and microbiological purity.
This avoids contamination of the vaporisers and maximises the lifetime of the devices used.
The containers used are made of first-class PE of the highest quality and can be recycled after they have been completely emptied.
The product must be used appropriately and in delivery condition.
The event locations regulations (VStättV) or the corresponding legislations must be observed.
Taking into account the visibility and the desired effect, the proper dosage of the fluid concentration in the air is between 25 and max. 80 mg/m3.
Especially the density must be dosed to ensure that the exits and emergency exits in closed rooms are always visible.
The same applies to the escape routes lighting and markings, staircases, shafts, slab edges etc. The visibility of 25 m(max. distance from the next exit acc. to VStättV) must be observed.
In addition, the density must be dosed in such a way that the well-being of the persons in the room is ensured with regard to the mist and fume content in the air.
To prevent anxiety, fogged rooms must never be locked.
According to VStättV, only experienced, reliable adults are allowed to operate and maintain technical installations.
Every fogged room must be monitored by instructed persons.