Mr Ralph VIENNA Opal Glass Pendant Light Installation Guide
- June 12, 2024
- Mr Ralph
Table of Contents
VIENNA Opal Glass Pendant Light
Installation Guide VIENNA Pendant Light
Installation Instructions
VIENNA Opal Glass Pendant Light
- Position the adjustable ring at the top of the Lamp Holder.
- Insert the Lamp Holder into the Glass Shade from the top. Thread the 3 suspension wires through the holes starting from inside the shade.
- Use the other adjustable ring to fix the lamp holder in place. Finger tighten only.
- The lamp holder should look like this when assembled.
- Insert the suspension wires into the ceiling rose and adjust until you have the desired height. Leave a little slack in the electrical cable so the weight of the shade is held by the 3 suspension wires and not the cable
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>