Mr Ralph DOTT Light Wall Light Instruction Manual
- June 12, 2024
- Mr Ralph
Table of Contents
DOTT Light – Installation Instructions
Only to be carried out by a registered electrician.
DOTT Light Wall Light
- Unpack baseplate. Strip outer sheath of cable close to base.
- install crimp connectors (not supplied) to the cables. If there is room, stagger the connectors.
- Put a length of heatshrink on the fixed installation cable. Connect the crimp connectors to the fixed installation cable.
- Slide the heatshrink into position and activate.
- Carefully push the cable back into the hole. This is easier if the hole is larger than 16mm or there is a wall cavity.
- Fix the baseplate into a solid substrate with supplied screws.
- Insert the lampbulb and screw on the glass globe.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>