SVEN RX-G880 Gaming Mouse User Manual

SVEN RX-G880 Gaming Mouse

Product Information

The RX-G880 gaming mouse is an input device designed for entering information into the computer and controlling its operation. It offers a range of functionalities and customizable settings to enhance your gaming experience.

Product Usage Instructions

1. Standard Functionality of Mouse Buttons: The mouse has 5 standard mouse functions: left, right, and middle clicks, as well as K4 (Back) and K5 (Forward) buttons.
2. Assigning Functions to Mouse Buttons: To assign a different function to a button, save the current functionof the left-click button on another button before making changes. Failure to do so will prompt a system message asking you to save the left-click function.
3. Macros: You can record keyboard shortcuts and assign them to selected mouse buttons. Refer to point 5 in the manual for detailed instructions on creating macros.
4. Configuration Selection: In the software, you can save configured profiles on your PC, load previously saved profiles, or reset profiles to default settings.
5. Cursor Movement Speed: There are 11 cursor movement modes to choose from in the settings.
6. Scrolling Speed: You can control the scrolling speed by adjusting the number of lines that will be scrolled on your screen.
7. DPI Mode Settings: The software allows you to configure up to 7 DPI modes ranging from 400 to 7000. Each DPI mode corresponds to a user-selected color.
8. Creating and Using Macros: Macros enable you to perform a combination of keyboard and mouse actions with a single click. Follow the instructions in point 5 of the manual to create macros.
9. Creating Macros: To create a macro, select the keys you want to record and set the time interval for key presses (real-time, fixed time, or no delay).

Congratulations on your purchase of the Sven mouse!

COPYRIGHT
© SVEN PTE. LTD. Version 1.0 (18.11.2021).
This Manual and information contained in it are copyrighted. All rights reserved.

TRADEMARKS
All trademarks are the property of their legal holders.

NOTICE OF RESPONSIBILITY RESTRICTION
Despite the exerted efforts to make this Manual more exact, some discrepancies may oc-cur. The information in this Manual is given on «as is» terms. The author and the publisher do no bear any liability to a person or an organization for loss or damage which has arisen from the information contained in this Manual

BUYER RECOMMENDATIONS

• Unpack the device carefully. Make sure there are no accessories left in the box. Check up the device for damage; if the product was damaged during transportation, address the firm which carried out the delivery; if the product functions incorrectly, address the dealer at once.
• Check up the package contents and availability of the warranty card. Make sure the war-ranty card has a shop stamp, a legible signature or the seller’s stamp and purchase date, and the goods number corresponds to that in the warranty card. Remember: in case of war-ranty card loss or discrepancy of numbers you forfeit the right for warranty repairs.
• Before installing and using the speaker system, read this Manual carefully and keep it for fu-ture reference.
• Shipping and transportation equipment is permitted only in the original container.
• Does not require special conditions for realization.
• Dispose of in accordance with regulations for the disposal of household and computer equipment.
• The date of manufacture of the product is indicated on the box.

PACKAGE CONTENTS

• Gaming mouse — 1 pc
• Operation Manual — 1 pc
• Warranty card — 1 pc

APPOINTMENT
RX-G880 gaming mouse is an input device. It is designed for entering (entering) information into the computer, as well as controlling the operation of the computer

SYSTEM REQUIREMENTS

• ОS Windows.
• Free USB port.

PREPARATION TO WORK

• Connect the gaming mouse to an available USB connector on the PC.
• After connecting to the USB port, the PC will automatically recognize the device.
• To use the built-in mouse memory, adjust the buttons and backlight, you need to install the software (downloaded from the website www.sven.fi). Run the previously downloaded file to install the driver, follow the installer’s advice. Administrator rights may be required.
• After installation, the program will automatically detect the presence of the mouse. You can call up the control window using the icon in the taskbar or in the Windows system tray.
• The software consists of 5 main sections of settings: Mode Settings (Profile 1 and Profile 2), Settings, Backlight Settings, Macro Settings.
• By default, the software contains 2 profiles. Each of them can be customized according to user preferences. The software provides three control buttons for configuration items: factory reset, profile upload and download.

SETTINGS

• The software has 5 types of settings: Mode Settings (Profile 1 and Profile 2), Settings, Backlight Settings, Macro Settings. You can switch between the settings by clicking on the icons at the top of the software.
• After setting the required parameters, click the «Apply» button. The settings will be saved automatically to the memory of the mouse.

BUTTON CUSTOMIZATION

• The software allows 7 buttons to be programmed according to user preferences. When you press a programmable button number, two-level windows will appear allowing you to selectyour preferred button value.
• The software contains an option to protect the left mouse button, which does not allow reassigning the button responsible for the left click to another function, without first saving the left click on another button, because this function is essential for the functioning of the mouse. If you try to assign a different function to the left button without first saving the left- click function on another button, a system message will pop up on the screen asking you to save the left-click function.
• By clicking on the item responsible for the corresponding button, a window will open allowing you to select a new functionality, as shown in the figure below. The menu consists of 7 items: standard functionality of mouse buttons, specialized functions, multimedia functions, Internet functions, PC functions, hot keys and macros

STANDARD FUNCTIONALITY OF MOUSE BUTTONS
The first item includes 5 standard mouse functions: left, right and middle clicks, K4 – Back, K5 – Forward, as shown in the figure.

SPECIAL MOUSE BUTTONS

Advanced settings allow you to assign the following functions to buttons:

• DPI switching
  A function that allows you to adjust the speed of cursor movement. «DPI cycle» – switching will occur cyclically, «DPI + / -» will increase or decrease the speed of movement in accordance with the pressed button.

• Fire

• Slow aiming. Used in games where aiming is required

• Backlight mode. Switches the backlight color

• Backlight On/Off

MULTIMEDIA FUNCTIONS
Media lets you assign functions to the media buttons:

• Play/Pause
• Stop
• Previous track
• Next track
• Sound + (Volume up)
• Sound – (Decrease volume)
• Soundless

FUNCTIONS FOR INTERNET USE
This section groups the following functions:

• Homepage. When clicked, the start page opens
• Search. When pressed, the address bar enters search mode
• Back. Clicking to open the previous page
• Forward. When clicked, the next page opens from which you previously returned
• Stop. When clicked, the page loading will be stopped
• Refresh. When clicked, the page will be refreshed
• Favorites. When clicked, a tab with sites added to favorites opens (it does not work with all browsers)

COMPUTER MANAGEMENT FUNCTIONS
The «Other» option allows you to assign the following functions to the keys:

• My computer
• Calculator
• Desktop. After assigning this function to a button, clicking on it will minimize all open windows

USER-SELECTED KEYBOARD SHORTCUTS
By selecting the «Hotkeys» option, you can assign a keyboard shortcut to the mouse button, for example, such as: Ctrl + C (Copy), Ctri + V (Paste), Win + D (Minimize all windows), etc. commands use latin letters:

MACROS
A macro allows you to record a keyboard shortcut and assign it to the selected mouse button. In this section, you can select a macro from the list of previously recorded ones. More details on how to create macros will be described in point 5.

CONFIGURATION SELECTION
In the lower part of the software, the user can save the configured profile on the PC and load the previously saved profiles, or reset the profile to the default settings.

SETTINGS
The «Settings» section consists of 5 main parts:

• «Fire» button settings
• Pointer (cursor) movement speed
• Double click speed
• Scrolling speed
• Setting DPI modes

«FIRE» BUTTON SETTINGS

• In the «Repeats» (Repeats) field, you can set the number of repeated clicks that the button should make after clicking.
• In the «Interval» field, you can set the interval with which cartridges will fly out.

CURSOR MOVEMENT SPEED
The settings provide an opportunity to choose from 11 cursor movement modes.

SCROLLING SPEED
The scrolling speed is controlled by the number of lines that will be scrolled on the user’s screen.

DPI MODE SETTINGS
The software allows you to configure up to 7 DPI modes ranging from 400 to 7000. Each DPI mode corresponds to a user-selected color. A checkmark indicates which DPI mode is currently set.

CREATING AND USING MACROS
Macros allow you to play a combination of keyboard and mouse keys with one click.

CREATING MACROS

1. Go to the Macros tab.
   Select the macro playback mode:

2. Execute as long as the button is pressed

3. Stop after macro end

4. To create a macro, you need to click «New Macro» and enter an arbitrary name in numbers or Latin letters. Then click «ОК».the memory of the mouse

5. Select the time interval with which the entered keys should be pressed.
   In real time. In this mode, the real time interval with which the keys are entered will be recorded.
   Delay. Fixed time set by the user.
   No delay. The minimum interval will be set in this mode

6. To record a macro, press «Record» and enter the key combinations that you want to assign to this macro.

7. After entering the desired combinations, press «Stop» to complete the recording.

8. It is also possible to manually correct the time between clicks on the desired one. To do this, right-click on the interval you want to correct  and select the «Edit» item.

9. In the created macro, you can delete the entered keys or the time between pressing. To do this, right-click on the unnecessary parameter and select «Delete» in the context menu

10. If you need to add a key value to an existing macro, you need to right-click the place where you want to make an edit and select «Add». Then you need to select the required action and click «ОК».

11. To assign a macro to a mouse button, select «Macros», then select the macro you want, and then click «Apply».

Macro management

After right-clicking on the macro, a context menu will appear, which will offer you to select the next action:

• Create a new macro
• Rename
• Delete
• Import one macro
• Import all macros
• Export one macro
• Export all macros

BACKLIGHT SETTING
To go to the backlight control panel, press the «Backlight» button on the top of the software.

Backlight status. In this section, you can select the mode in which the backlight will work or the mode in which the backlight will be turned off.
The section «Backlight modes» allows you to select a backlight mode from four available.

FAN CONTROL
At the bottom of the mouse is a switch that controls the fan. To turn on, turn off or change the fan speed, you need to change the position of the switch.

TECHNICAL SPECIFICATIONS

Notes.Technical specifications given in this table are supplemental information and cannot give occasion to claims. Technical specifications are subject to change without notice due to the improvement of SVEN production.

www.sven.fi

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>