Harley Benton 521917 Evil Twin Effect Pedal for Electric Guitar User Guide
- June 4, 2024
- Harley Benton
Table of Contents
Benton 521917 Evil Twin Effect Pedal for Electric
Guitar
User Guide
Quick Start Guide
This quick start guide contains important information on the safe operation of the product. Read and follow the safety advice and instructions given. Retain the quick start guide for future reference. If you pass the product on to others please include this quick start guide.
Safety instructions
Intended use
This device is intended for use as an effect pedal for electric guitars. Any
other use or use under other operating conditions is considered to be improper
and may result in personal injury or property damage. No liability will be
assumed for damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard! Ensure that
children do not detach any small parts from the product. They could swallow
the pieces and choke!
Where to use the product
Never use the product
- in conditions of extreme temperature or humidity
- in extremely dusty or dirty areas
- at locations where the unit can become wet
General handling
- To prevent damage, never use force when handling the product.
- Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use
liquid cleaners such as benzene, thinners or flammable cleaning agents.
Features
- Dual effect pedal for electric guitars
- Foot switches with LED indicators
- The effect modules A and B can be used simultaneously or individually and in any order
- Ultra-wide dynamic range and exceptionally open, tube-like drive tone (effect module A)
- Adaptation of the original Japanese green OD circuit with smooth gain and pronounced mid-hump characteristic (effect module B)
- 3-way switch for effects order and the pure single effect mode
- Power supply via 9 V ****power adapter (not included, suitable optional power adapter: item no. 409939, no battery operation)
Operating elements
1 | 9 V **** | Socket for connecting a power adapter (not included) |
---|---|---|
2 | LEVEL | Rotary control for adjusting the volume level of the Tube drive |
effect
3| Hot/Warm| Switch for selecting the tone mode of the Tube drive effect Hot:
aggressive and powerful crunch tone
Warm: classic tube amplifier with a smooth, natural tone
4| TONE| Rotary control for adjusting the tone color of the Tube drive effect
5| DRIVE| Rotary control for adjusting the gain level of the Tube drive effect
6| INPUT| 1/4″ jack socket for connecting instruments
7| Tube drive| Footswitch for switching on/off the Tube drive effect
8| Overdrive| Footswitch for switching on/off the Overdrive effect
9| OUTPUT| 1/4″ jack socket for connecting an amplifier
10| DRIVE| Rotary control for adjusting the gain level of the Overdrive effect
11| | Switch for selecting the operation mode
| A – B| The Tube Drive and Overdrive effects can simultaneously be enabled.
The signal will go through the Tube drive effect and then to the Overdrive
effect.
| A or B| Either the Tube drive effect or the Overdrive effect can be enabled.
| B – A| The Overdrive and Tube drive effects can simultaneously be enabled.
The signal will go through the Overdrive effect and then to the Tube drive
effect.
12| VOLUME| Rotary control for adjusting the volume level of the Overdrive
effect
13| Lp/Hp| Switch for switching the tone mode (low-peak/high-peak) of the Tube
drive effect
14| TONE| Rotary control for adjusting the tone color of the Overdrive effect
Technical specifications
• Input connections| 1/4″ jack socket
Socket for connecting a power adapter
---|---
• Output connections| 1/4″ jack socket
• Power supply| External power adapter, 100 – 240 V ~ 50/60 Hz
• Power adapter| Secondary current 100 mA
Secondary voltage 9 V ****
Polarity Centre Negative
• Degree of protection| IP20
• Dimensions (W × H × D)| 95 mm × 37 mm × 120 mm
• Weight| 322 g
• Ambient conditions| Temperature range 0 °C…40 °C
Relative humidity 20 %…80 % (non-condensing)
For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
****This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose of your old device with your normal household waste. Dispose of this product through an approved waste disposal firm or through your local waste facility. Comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.
Thomann GmbH
• Hans-Thomann-Straße 1
• 96138 Burgebrach
•www.thomann.de
•info@thomann.de
DocID: 521917_19.07.2022
Documents / Resources
|
Harley Benton 521917 Evil Twin Effect Pedal for Electric
Guitar
[pdf] User Guide
521917, Evil Twin Effect Pedal for Electric Guitar, 521917 Evil Twin Effect
Pedal for Electric Guitar
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>