Harley Benton 60-B Spaceship Power User Guide

Harley Benton 60-B Spaceship Power

Product Information

The Spaceship Power 60-B is a multiple-power supply designed for effects pedals. It provides various voltage outputs to power different devices. The product features multiple outputs with different voltage and current specifications, as well as a USB-A  and USB-C output for charging other devices. The power supply comes with a power adapter for connecting to the mains.

Safety Instructions

• Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children to prevent choking hazards.
• Never let children unattended use electrical devices.
• Avoid direct contact of the rubber feet with surfaces, as the plasticiser in the rubber feet may cause permanent dark stains. Use suitable underlays such as felt-pad floor protectors if necessary.
• Avoid using liquid cleaners like benzene, thinners, or flammable cleaning agents on the product.

Features

• Multiple voltage outputs for effects pedals
• USB-A and USB-C outputs for charging
• Mains switch for power control
• LED indicator for active outputs

Scope of Delivery

• Spaceship Power 60-B unit
• Power adapter

Operating Elements

• USB-A output, uninsulated
• USB-C output, uninsulated
• Socket for the supplied power adapter
• Mains switch
• Outputs 1-2 with specific voltage and current specifications
• Outputs 3-6 with 9 V @ 250 mA each, insulated
• Outputs 7-9 with 9 V @ 500 mA each, insulated
• Outputs 10-13 with voltage switches, insulated, switchable between 9 V @ 500 mA / 12 V @ 375 mA / 18 V @ 250 mA
• Control LED for outputs 1-13

Product Usage Instructions

1. Connect the supplied power adapter to the Spaceship Power 60-B and plug it into a power source.
2. Switch on the device using the mains switch.
3. For devices requiring a 24 V supply voltage at a maximum of 2000 mA, connect them to output 1 using a suitable voltage supply cable.
4. For devices with high power consumption (e.g., multi-effect devices) requiring a 9 V supply voltage at a maximum of 3000 mA, connect them to output 2 using a suitable voltage supply cable.
5. For effects pedals or similar devices requiring a 9 V supply voltage at a maximum of 250 mA, connect them to outputs 3-6 using suitable voltage supply cables.
6. For effects pedals or similar devices requiring a 9 V supply voltage at a maximum of 500 mA, connect them to outputs 7-9 using suitable voltage supply cables.
7. Important: Ensure that the polarity of the devices being connected matches the polarity of the power supply outputs. Connecting a device with polarity-reversed voltage may cause damage.

Safety instructions

Intended use

This product is meant to be used as a multiple power supply for effects pedals. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts from the product. They could swallow the pieces and choke! Never let children unattended use electri-cal devices.

Possible staining

The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time cause perma-nent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if necessary, i.e. felt-pad floor pro- tectors or similar.

Where to use the product Never use the product

• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet

Quick Start Guide

This quick start guide contains important information on the safe operation of the product. Read and follow the safety advices and instructions given. Retain the quick start guide for future reference. If you pass the product on to others please include this quick start guide.

General handling

• To prevent damage, never use force when handling the product.
• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents. Incorrect handling of lithium batteries can result in injury
• In the event of a short circuit, overheating or mechanical damage, lithium batteries can cause severe injuries.
• When handled correctly and appropriately lithium batteries pose no risk.
• Store lithium batteries in a cool, dry place, ideally in the original packaging.
• Store lithium batteries away from heat sources (e.g. radiators or sunlight). Lithium batteries are hermetically sealed. Never attempt to open a lithium battery.
• If the battery housing is damaged small amounts of the electrolyte may leak out. If this should happen, seal the lithium battery in airtight packaging and wipe up the traces of electrolyte using absorbent paper towels. You must wear protective rub-ber gloves when doing so. Clean your hands and the affected surface thoroughly with cold water.
• Never attempt to recharge non-rechargeable lithium batteries. When charging lith-ium batteries you must use a suitable charging device intended for the purpose.
• Before disposing of the device remove the lithium batteries. Protect used lithium batteries against potential short circuits, e.g. by covering the poles with adhesive tape.
• Only use powder extinguishers or other suitable extinguishing agents to extinguish a burning lithium battery.

Features

• Lightweight, compact pedalboard
• Battery or mains powered
• Powder-coated aluminium frame
• 11 insulated, filtered and short-circuit proof outputs eliminate noise and hum
• 4 uninsulated outputs for multi-effect devices or for charging smartphones or tablets
• Incl. power adapter for power supply and charging
• With volt/current meter
• High current output for modern digital effects
• LED indicator on each output

Scope of delivery

• 4 × DC cable with a length of 30 cm
• 5 × DC cable with a length of 60 cm
• 4 × DC cable with a length of 90 cm
• 1 × reverse polarity cable with red plug
• 1 × battery clip
• 1 ×  connector cable with a length of 45 cm with 5.5 × 2.5 mm green coaxial plugto 5.5 × 2.1 mm coaxial plug
• 1 × connector cable with a length of 45 cm with 3.5 mm jack plug to 5.5 × 2.1 mm coaxial plug
• 1 × voltage boost cable, 20 cm
• 1 × current boost cable, 60 cm
• 1 × EIAJ-05 cable
• 1 × power adapter with EU plug, 120 cm
• 1 × cable fastening set
• 1 × velcro tape, self-adhesive, 300 cm × 4.5 cm
• 2 × Allen key (5 mm and 6 mm)
• 1 × transport bag with storage pocket and shoulder strap

Operating elements

1. USB-A output, uninsulated
2. USB-C output, uninsulated
3. Socket for the supplied power adapter for power supply and charging
4. Mains switch
5. Output 1 with 24 V @ 2000 mA, uninsulated
6. Output 2 with 9 V @ 3000 mA, uninsulated
7. Outputs 3 – 6 with each 9 V @ 250 mA, insulated
8. Outputs 7 – 9 with each 9 V @ 500 mA, insulated
9. Outputs 10 – 13 with voltage switches, insulated, switchable between
   • 9 V @ 500 mA /
   • 12 V @ 375 mA /
   • 18 V @ 250 mA
10. Control LED for outputs 1 – 13, lights up green when voltage is present, turns off when output is deactivated due to overload

Using the product

• Use the supplied power adapter to connect the device to the power and press the mains switch to switch on the device.

• Use a suitable voltage supply cable to connect effects pedals or similar devices which require 24 V supply voltage at a maximum of 2000 mA to the output 1.

• Use a suitable voltage supply cable to connect devices with high power consumption (i. e. multi-effect devices) which require 9 V supply voltage at a maximum of 3000 mA to the output 2.

• Use suitable voltage supply cables to connect effects pedals or similar devices which require 9 V supply voltage at a maximum of 250 mA to the outputs 3 – 6.

• Use suitable voltage supply cables to connect effects pedals or similar devices which require 9 V supply voltage at a maximum of 500 mA to the outputs 7 – 9.
  Danger of property damage by polarity reversal
  Make sure that the polarity of the devices to be connected must be the same as the polarity of the power supply outputs . To power a device with polarity- reversed voltage may damage it!

• Use suitable voltage supply cables to connect effects pedals or similar devices which require 9 V ,12 V or 18 V supply voltage at a maximum of 500 mA, 375 mA or 250 mA to the outputs 10 – 13. Set the associated switch above the output to the position of the required voltage. The maximum output power of 45 W must not be exceeded.

• Danger of property damage by overvoltage
  Make sure that connected devices are actually suitable for the set voltage. To power a device with overvoltage may damage it!

• Use suitable voltage supply cables to connect devices as smartphones or tablets to the USB outputs.

• Each operational output 1 – 13 is indicated by a green LED. If an output is switched off due to overload, the LED turns off. Then disconnect the respective pedal from the device. After approx. 2 seconds, the normal voltage supply is restored here.

• Press the mains switch to switch off the device.

Technical specifications

• Connections
  • Output 1 24 V @ max. 2000 mA
  • Output 2 9 V @ max. 3000 mA
  • Outputs 3 – 6 9 V @ max. 250 mA (individually insulated)
  • Outputs 7 – 9 9 V @ max. 500 mA (individually insulated)
  • Outputs 10 – 13 switchable 9 / 12 / 18 V @ max. 500 / 375 / 250 mA (individually insulated)
• USB output USB-C max. 18 W USB-A max. 18 W
• Power output 45 W
• Current output 3750 mA
• Power supply External power adapter, 100 – 240 V ~ 50/60 Hz
• Operating voltage 24 V / 2 A, centre negative
• Battery Battery type Lithium-ion
  • Voltage 7.4 V
  • Capacity 9000 mAh
  • Operating time 1.1 h (after 3.4 h charging
• Dimensions (W × H × D) 600 mm × 75.5 mm × 305 mm 23.62″ × 2.97″ × 12″
• Weight 2190 g
• Ambient conditions Temperature range 0 °C…40 °C
  • Relative humidity 20 %…80 % (non-condensing)

For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Only dispose of lithium batteries when they are discharged. Remove replaceable lithium batteries from the device before disposal. Protect used lithium batteries against short circuits, for example by covering the poles with adhesive tape. Permanently built-in lithium batteries must be disposed of together with the device. Please inquire about an appropriate collection point
This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose of your old device with your normal household waste. Dispose of this product through an approved waste disposal firm or through your local waste facility. Comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach
www.thomann.de
info@thomann.de

References

• Buy musical instruments online from the market leader – Thomann International

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>