VEVOR Pond and Lake Aeration System User Manual

Pond &LakeAerationSystem

Pond and Lake Aeration System

Introduction

Thank you for purchasing the VEVOR Pond & Lake Aeration System.Our product adds oxygen at all levels in the most effectiveandconvenient way to achieve a healthy balance. This device helpsyouto restore the lake and pond environment naturally.

Main Functions

1. Compressed air is blown into the bottom of the pond to increasethe dissolved oxygen rate in the pond. Keep the water clear andreduce the chance of fish death
2. It can inflate ponds up to 3 acres, and the compressor canoperate at a depth of up to 50 feet, which is suitable for all kindsof medium and large fish ponds.
3. Our aeration pump can quickly increase the oxygen content andcan even be used as a de-icer in winter!
4. Made of durable and durable materials, you can use our pondaerator in almost any season and weather conditions
5. This product is made of high-quality silent compressor, durableairpipe, and anti-rust and anti-corrosion aeration plate.

Technical Specification

Main parts

Oil-free silent compressor, 120V 60HZ including motor base, silencer, motor switch and regulating valveHigh-quality rubber air hose, size 3/8, high temperature resistance, corrosion resistance, suitable for various harsh environmentsAeration plate, high-quality rubber diaphragm and heavy- duty304stainless steel base. It can stably sink to the bottomand improvetheaeration effect.
Other accessories：

Assembly Procedures

1. Fix the 4 motor bases and place the motors in a suitableplaceinthe pond.
2. Select the number of air pipes according to your needs, connect 3/8 of the air pipes to the regulating valve, and fix the air pipeswithmetal clamps. Open the corresponding regulating valve.
3. Connect the aeration plate to the end of the trachea and fix it withametal clamp. Then put the aeration pan in the pond.
4. After power on, turn on the motor switch to make your pondproduce beautiful bubbles

Precautions

1. Not recommended for pumping acid, base,organic vaporsor explosive gases.Be sure to properly identify intake and dischargebefore using pump

2. Pump only clean, dry air.

3. Operate at 32°F- 1O4°F (O°C- 40°C).

4. Protect unit from dirt and moisture.

5. Do not pump flammable and explosive gas or use it inanenvironment containing such gas.

6. Protect all surrounding items from exhaust air. This exhaust air canbecome very hot.

7. Corrosive gases and particulate material will damage unit. Water
   vapor, oil-based contaminants, or other liquids must be filteredout.

8. Consult your Distributor/ Representative before using at highaltitudes.

9. This pump is oil-less and requires NO lubrication.

malfunction repair

1. We provide online video maintenance services,
2. We will provide free warranty service within purchase (except for human factors)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>