boAt LUNAR CALL Round Dial Smart Watch User Manual
- June 12, 2024
- Boat
Table of Contents
boAt LUNAR CALL Round Dial Smart Watch
LUNAR CALL
Thank you for choosing the boAt Lunar Call as your fitness transformation
companion. Allow this manual to guide you through the functioning of your
smartwatch. Please read it thoroughly before using it for a smooth sail You
may refer to these instructions for later use as well
PACKAGE CONTAINS
- boAt Lunar Call x1
- USB magnetic charging cable ×
- User Manual x1
- Warranty Card ×1
CHARGING THE WATCH
The smartwatch must be charged before initial use. It takes up to 2 hours to
be fully charged. Connect and charge the watch with the image below as a
reference, using a 5V/2A adapter.
Note: Once your watch is at 10% battery, it will automatically switch to power-saving mode which will disable all functions.
TURNING THE WATCH ON/OFF
To turn the watch on/off, long-press the side button for 3-5 seconds. You can
wake up the screen by lifting your wrist.
CONNECTING TO THE APP
-
Download the boAt Crest app on your phone Available on both App Store (iOS 12.0 and above) and Google Play Store (Android 7.0 and above) OR
Scan [QR CODE] (Also available on the watch) -
Connect the device with the boAt Crest app, ensure that the phone’s Bluetooth, as well as the GPS functionalities, are turned on Select Lunar Call on the home screen of the app and click pair to connect.
-
Once connected, you will get an alert to connect with LUNARCALLBT, click pair if need to receive or make calls from the watch
-
To use all features of your Lunar Call seamlessly, tap on ‘yes’ to the ‘connection’ and ‘grant access’ system prompt.
-
Disable battery optimization
Note: To ensure connectivity throughout your journey, make sure the app is allowed to run in the background of your phone at all times.
SYNCING YOUR SMARTWATCH TO THE APP
Data Synchronization
- Open the app on your phone.
- Make sure your Lunar Call is connected to the app
- Synchronization will start automatically once you enter the app interface.
Note:
Synchronize data at least once a day to avoid data loss in the watch.
NAVIGATING THROUGH THE FUNCTIONS SHORT PRESS THE SIDE BUTTON FOR MAIN MENU
Activity Tracker
Click on this to check your daily activity data like stop count, calorie,
active minutes, no. of times you were standing, distance covered.
Phone
To use the BT Calling feature, open the boAt Crest app and pair the watch.
Once paired you will got the pop-up on the app home screen to connect with
Phone’s Bluetooth. Click on “pair to connect with phone’s Bluetooth,
Alternatively, you can go to phone’s Bluetooth settings and pair “LUNARCALLBT
to start the calling feature on your watch.
Note: Enable call alerts from the setting to get calls on the watch Up to 10 contacts can be saved in the phonebook. Call history will show the fatest call details. Use a dialor to dial any number
Spo2 Monitor
Wear the watch on your wrist, then click on the icon to start measurements You
can also view the data on the app
Note: Measurements are for reference only and not for medical purposes.
Workout
Choose from multiple sports mode like outdoor run, outdoor walk, indoor walk,
indoor run, strength training, football, basketball, table tennis, badminton,
indoor cycle, elliptical, yoga, cricket, free training, rower. Tap on any
sport mode to start the activity, you can pre-set your goal as well for each
activity. Pross the side button to pause or stop the activity. If the activity
is loss than 3 mins, it will not be recorded. Sync your smartwatch to the app
to get the detailed analysis
Heart Rate Monitor
Wear the watch on your wrist, then click on the icon to start measurements.
You can also view the data on the app
Note: Measurements are for reference only and not for medical purposes.
Sleep Monitor
Tap on the icon to review the sleep data of the previous night. Once the
asleep criteria are met, your smartwatch will start recording from 8 pm at
night to 10 am in the morning the next day. Once you lie down and watch
detects no movement for 30 minutes, it will start recording, and will stop
recording if it detects excessive movement. You can check the data on the app
only after the awake criteria is met. You can also track sleep scores on the
boAt Crest app.
Note;
“For accurate sleep data recording, the asleep criteria have to be met which
includes limited movement, wrist positions and angles, and more. “The awake
criteria will be met only after it records some noticeable movement
Workout records
You can view the records of your workouts here
Breathe
Click on the breath training icon to regulate your breathing with the
instructions given to relax.
Alarm
Tap on this to set an alarm on your watch.
Stress monitoring
Click this option to start the stress monitoring. Make sure you wear your
watch on your wrist properly to get accurate results. Analysis of the
measurement is
- Relax: 1-29
- Normal: 30-59
- Medium: 60-79
- High: 80-100
Note: Measurements are for reference only and not for medical purposes.
Event reminders
You can create event reminders from the app and get the alerts on the watch
Women Health
Enable and sot the details on the boAt crest app and get the alerts of your
period and ovulation dates on the watch
Al voice
Tap on this to enable “Ok google” and “sir” on the app and give the command
from the watch,
Note: Make sure the watch is connected with the app
Weather
Connect with the boAt crest app to get daily weather Updatos on the watch
TOOLS
Stopwatch
Click on this to start the stopwatch on your watch
Music Player
Tap on the remote music control icon on your watch to play music from your
phone.
Note: Some apps with different protocols might not work
Camera Control Mode
Tap on the remote camera icon on your smartwatch to click a photo from your
phone Note; Turn the camera on from your phone to use this feature.
Find My Phone
Tap on this icon to find your phone. Once enabled, your phone will start
ringing and vibrating. Tap again to stop it, Note Your smartwatch should be
connected to your phone via Bluetooth and within its range for this feature to
work.
Timer
Tap on this to turn on the timer.
Flashlight
Tap on this to turn your dial into a flashlight.
SETTINGS
Watch Faces
Tap on this icon to change your watch face.
Display
Tap on this to adjust the brightness, set the screen on time and enable wake
gesture
Sound and Vibration
Tap on this to adjust the watch volume, enable/disable ringtone, adjust
vibration levels
Workout
Enable auto workout mode from here
Do Not Disturb
Tap on this to disable all notifications except alarms.
GENERAL
View
Change the menu style to the grid or list view from here
Restart
Tap on this to restart your watch.
Power off
Tap on this to switch your watch off.
Factory Reset
Tap on this to reset watch data,
Note: All data will be erased if watch is reset
About
Shows the device details
Language
Change the language from here. Supports Hindi and english
SWIPE DOWN FOR SHORTCUT MENU
You can access DND, Brightness, Settings, etc.
SWIPE LEFT OR RIGHT TO ACCESS ALL DATA
You can access daily activity. sleep, heart rate monitor, weather music player
from here
SWIPE UP TO ACCESS THE NOTIFICATIONS
You can check all the notifications from here. Click delete icon to delete all
the notification.
PRODUCT PARAMETERS
MAINTENANCE
Regularly clean your wrist and the strap of the smartwatch, especially after sweating during exercise or being exposed to substances such as soap or detergent, which may get stuck on the other end of the product. Do not wash the strap with a household cleanser. Please use soap less detergent, rinse thoroughly and wipe with a piece of soft towel or napkin. For spots or stains that are not easy to remove, scrub the area with rubbing alcohol and then follow the above procedure.
FAG
Search for the app to connect keeps failing
- Keep the boAt Crest app updated to the latest version
- Close all the programs on the watch -> Stop and restart Bluetooth and GPS – Connect again
- Check and enable notification functions of your phone and keep the phone and watch in close contact.
Note: Make sure your phone system meets Android 7.0 and above and IOS 12.0 and above
My Watch Lunar Call is receiving no alerts, texts, or phone calls
Make sure smart rominders on the app are on and synced to the Lunar Call. Also
make sure your notification center of the phone is displaying messages. Only
then will your smartwatch also display those notifications. Make sure app is
running in the background and battery optimization feature on the phone is
disabled
My Bluetooth keeps getting disconnected
- Make sure there is not more than 7m distance between Bluetooth on the phone and the watch
- There is no obstacle in between the watch and the phono
- Make sure the app is running in the background
Which functions of the Lunar Call need Bluetooth to work?
Call & Text Notifications, Find My Phone, music control, camera control,
weather forecast, cloud, and custom watch faces and Bluetooth calling need
Bluetooth connectivity to work. Will it be okay to take a bath wearing the
Lunar Call? The IP68 water resistance will only work under the following
conditions (1) Maximum depth of water: 1.5m (2) Maximum time for exposure to
water: 10 minutes The watch isn’t suitable for hot baths, hot springs, saunas,
snorkeling, diving, water skiing and other wading or deep-water activities
with high-speed water flow
SAFETY & PRODUCT INFORMATION
Battery
- Do not disassemble, bore or damage the battery.
- Do not disassemble the built-in batteries of non-replaceable battery devices
- Do not use sharp objects to remove the battery.
HEALTH WARNING
- if you are wearing a pacemaker or other implanted electronic devices, please consult your doctor before using the heart rate monitor of the watch The optical heart rate sensor will glow green. If you suffer from epilepsy or are sensitive to blinking light sources, please consult your physician before wearing this device
- The device tracks your daily activities through sensors. This data is intended to tell you about your daily activities such as steps, sleep, distance, heart rate, and calories, but may not be completely accurate
- The device accessories, heart rate censor, oxygen level monitor, and other relevant data is designed for fitness and not for medical purposes. They are not applicable to the diagnosis,monitoring, treatment or prevention of any diseases or symptoms. The heart rate and blood pressure data is for reference only. We’re not responsible for any deviation in dat
- Avoid wearing the watch too tightly. Make sure you keep your skin dry – the area that comes in contact with the watch. If symptoms such as redness or swelling appear on your skin, immediately stop using the watch and consult the doctor.
THINGS TO KEEP IN MIND
- Sync data every day days to avoid data loss.
- Water Resistance will not work for seawater, acidic and alkaline solutions, chemical reagents and other corrosive liquid. The damage or defects caused by misuse or improper use are not covered by the warranty.
- Sports modes support up to 6 hours of exercise at a time.
- Avoid wearing the watch too tight in daily use. Keep the parts of skin touching the watch dry.
- Keep your arm still while measuring data for accurate measurement. Disclaimer: This product is an electronic monitoring product and is not intended as a medical reference. We reserve the right to modify or improve any of the functions described in this manual without any prior notice. At the same time, we hold the right to continuously update the product content.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT SUBSTITUTE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Old electrical appliances
must not be disposed of together with the residual waste, but have to be
disposed of separately. The disposal at the communal collecting point via
private persons is for free. The owner of old appliances is responsible to
bring the appliances to these collecting points or to similar collection
points. With this little personal effort you contribute to recycle valuable
raw materials and treatment of toxic substances
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>