SHIDU H100 Portable Karaoke Speaker Outdoor Wireless Activ Bluetooth User Manual
- June 12, 2024
- SHIDU
Table of Contents
SHIDU H100 Portable Karaoke Speaker Outdoor Wireless Activ Bluetooth
Welcome to use SHIDU speaker. H100/H200 is a multifunctional portable speaker with Instrument input functions. Please enjoy it after reading the user manual.
H100 Technical Parameters
H200 Technical Parameters
Structure Instruction
Display screen
- TF card slot: Support TF card, maximum up to 32G (MP3/WAV/WMA/FLAC/APE)
- USB slot: Support USB flash drive play, maximum up to 32G (MP3/WAV/WMA/FLAC/APE)
- Mic sound effect: Short press it to active the microphone sound effect, the blue indicator will be always on. Short press it again to turn off the microphone sound effect, the blue indicator will be off.
- Original
- Popular
- Professional
- Mic priority
- Recording: （Reference to details description for functions）
- Bluetooth: Short press this in any mode to enter into Bluetooth pairing status, long press this button in Bluetooth Mode to disconnect the current connection.
- Mode: Short press 3 secs this button to select Bluetooth mode, Audio in mode, Audio input mode, USB flash drive mode, TF card mode and UHF mode. When play music on TF card/USB flash drive, press and hold this button for 3 seconds switch to single song repeat with the screen display “ONE”, press and hold this button for 3 seconds again to switch back to all repeat with the screen display “ALL”.
- Previous: Short press to select the previous audio file
- Play/pause: In audio playing mode, press it to pause; press it again to play.Long press it in any mode to turn off the voice prompt, and long press it again to turn on the voice prompt .
- Next: Short press to select next audio file
- Monitor jack（Reference to details description for functions）
- Live broadcast jack（Reference to details description for functions）
- Audio input 18.Music volume control
- Music treble control 20.Music bass control
- Instrument volume control 22.Instrument input
- Microphone input: Support wired microphone input (not included).
- DC 15V Charging port: Charging port, please use an original adapter to charge.
- Microphone volume control
- Microphone treble control
- Microphone bass control
- Microphone ECHO control
- Microphone delay control
- Power on/ power off
TF card / USB flash drive play
The speaker will automatically play the music file After inserting the TF
card/USB flash drive. Support MP3/WAV/ WMA/ FLAC/APE music format .
Play/Pause: when playing music, short press the “ ” button to play&pause
music.
Previous/Next: when playing music, short press the “ ” or “ ” t button to
choose play the previous song and the next song.
REC Function
- Connected with a wireless or wired microphone, in any mode, Insert a USB flash drive or TF card, long press ” O” enter into REC mode and start recording. short press the ” O’ “ key again to stop recording, it will automatically play the present recording files.
- Play recording: Insert a USB flash drive or TF card with the recording file, and short press “ O ” to play the recording. It will play the last recording by default and please press “ ” or ” ” to select the recordings.
Live Broadcast Function
This feature allows you to achieve better recording effects during live
broadcasts. When you use our machine to play music and use a microphone to
record a live broadcast, use the red cable in the standard configuration. One
end is plugged into the headphone jack of your mobile phone, and the other end
is plugged into the live broadcast jack. This red line is passed from the
machine to achieve better recording sound.
Monitor Function
- Plug in your headphones and you can hear the music the machine is playing, including sound of the microphone, to get a more realistic feel for what you’re recording live. At the same time, the machine still has sound.
- You can mute it with the remote control, and the machine will have no sound, only the earphones have sound.
Bluetooth Function
Step 1: Switch on the speaker and press” ” to switch to Bluetooth mode. A
voice will prompt “Bluetooth is waiting for connection” and the “BLUE” icon
will display on screen.
Step 2: From your mobile setting, turn on the Bluetooth function.
Then search for “H100” and “H200″and connect. Bluetooth pairing is complete
with a voice prompt “Bluetooth is connected”. When playing music, Please keep
the speaker close to your device to maintain a stable connection.
Wireless Microphone Operation instructions
Switch ON / OFF
Long press “POWER” to switch on and there will be UHF frequency point by
default shows on the screen. Turn on the speaker, speaker and microphone will
connect automatically. Long press “POWER” again to switch off and the screen
will go out.
- Pair the UHF Wireless MIC Manually: (This operation only suits for no sound from the MIC
- Step 1: Switch on the speaker, short press
- ” ” key to UHF mode, then long press
- ” ” key 3 seconds to enter into UHF wireless pairing status with voice prompt
- “UHF is waiting for connection”.
Step 2: Switch on the UHF wireless MIC by long press the “POWER”
key,quick press the “POWER” 3 times and then current frequency stop flashing
means pairing is successful. Then please manually pairing the second
microphone in the same way. Then you can use these 2 microphones at the same
time.
Note: Please make these 2 microphones in different frequencies to avoid
interference.
Battery Indication of UHF Wireless MIC
In working status, it has sufficient battery power with “ ” indica- tion shows
on screen; it’s low battery when screen shows “ ” indication, pls replace AA
battery *2 timely.
Note: Please twist-off the battery cover and put the batteries properly.
(Please mind the positive & negative anode.)
Charging instructions
- Please turn off the speaker when charge.Please use the standard adapter. Please unplug the adapter timely after fully charged (the charging time is normally 6~8 hours.
- Battery status: There are 5 battery indicators on the screen and each represents 20%. Please charge it timely when the speaker reminds”Low battery, please charge”. The battery indicator will blink when charging and stop blinking after fully charged and 5 indicators all light. Please charge it 1~2 hours more after fully charged to lengthen the life of battery.
- Please charge the battery within 48 hours if the battery is too low and shut down. Keep the speaker fully charged if not use for a long time. If the battery is no power, please turn off the speaker and charge it in open territory far from fire or another hot environment.
Remote control Operation instructions
Normally, the remote control should be in front of the receiving window and
within the scope of 6M & 30°.
- Please point the remote control toward the receiving window and avoid the obstacle.
- Please avoid the strong light.
- Please don’t use old & new battery at the same time.
Note: Please refer to the real product.
Solve some normal problems by yourself
| Trouble | Possible reasons | Measures |
|---|
Switch on the speaker but no sound
| 1. Speaker is running out of power| Please charge in time and make sure the
screen is on
2.No audio input| Please check the audio input signal
3. Volume at minimum| Please turn up the volume properly
Sound distortion
| 1.The volume is too high| Please turn down the volume properly
2.The speaker is broken| Please contact us for maintenance
No sound when playing music
| 1. The audio’s format in a USB flash drive or TF card
is wrong
|
Please turn the music format to MP3
/WAV/ WMA/ FLAC/APE
2. Chaotic procedure with the wrong operation| Please restart the speaker
3. USB flash drive/TF card is not inserted correctly| Please insert the
USB/TF card properly.
Can only work several minutes after being charged or have to work
with Adapter
| 1.The battery is broken| Please change a new same battery
2. The connecting cable of the battery is loosened or disconnected|
Please contact us for maintenance
3. Hasn’t fully charged the speaker| Please fully charge it before using
SHIDU After-sales service
- If you have any questions, please feel free to contact
- us, we will try our best to provide best service.
- www.10shidu.com Email: service@10shidu.com.
Shenzhen SHIDU Digital Co.,Ltd.
- Tel:+86 • 755 • 21635866 Hotline:4008 939 488
- Building A8, Zone 2, Xinhe Xinxing Industrial Park, Baoan District, Shenzhen, China
- GB8898-2011;GB17625.1-2012;GB/T13837.2012
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>