EZVIZ C8C Lite Security Camera User Manual
- June 12, 2024
- ezviz
Table of Contents
C8C Lite Security Camera
User Manual
C8C Lite Security Camera
COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd.. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs
are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred
to as “EZVIZ”).
This user manual (hereinafter referred to as “the Manual”) cannot be
reproduced, changed, translated, or distributed, partially or wholly, by any
means, without the prior written permission of EZVIZ. Unless otherwise
stipulated, EZVIZ does not make any warranties, guarantees or representations,
express or implied, regarding to the Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only.
The information contained in the Manual is subject to change, without notice,
due to firmware updates or other reasons. Please find the latest version in
the ™ website (http://www.ezviz.com).
Revision Record
New release – January, 2019
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the properties of EZVIZ in
various jurisdictions. Other trademarks and logos mentioned below are the
properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND
ERRORS, AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR
PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA
OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF EZVIZ
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S
TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE
PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE
AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A)
IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF
NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE THIRD
PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD PARTY’S PRODUCTS,
SOFTWARE, APPLICATIONS, AND AMONG OTHERS.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.SURVEILLANCE
LAWS AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT
LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT
YOUR USE CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE
EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE
LATTER PREVAILS.
Package Contents
Basics
Name
LED Indicator| Description
• Solid Red: Camera starting up.
• Slow-flashing Red: Wi-Fi connection failed.
• Fast-flashing Red: Camera exception (e.g. Micro SD card error).
• Solid Blue: Video being live viewed in the EZVIZ app.
• Slow-flashing Blue: Camera running properly.
• Fast-flashing Blue: Camera ready for Wi-Fi connection.
---|---
Name
Reset Button| Description
Hold for 5 seconds to restart and reset all parameters to default.
---|---
Setup
-
Power-on
Plug the power cable into the camera, and then plug the power adapter into an outlet as shown in the figure below.
The LED indicator turning fast-flashing blue
indicates that the camera is powered on and ready for Wi-Fi configuration. -
Connect to the Internet
1. Get the EZVIZ app
– Connect your mobile phone to Wi-Fi.
– Download and install the EZVIZ app by searching “EZVIZ” in the App Store or Google Play Store TM.
– Launch the app and register an EZVIZ user account.
2. Add camera to EZVIZ
Option 1: Wireless Connection
– Log in to your account using the EZVIZ app.
– On the Home screen, tap “+” on the upper-right corner to go to the Scan QR Code interface. – Scan the QR code on the Quick Start Guide cover or on the body of the camera.
– Follow the EZVIZ app wizard to finish Wi-Fi
configuration.
Option 2: Wired Connection
– Connect the camera to the LAN port of your router with the Ethernet cable (not included in the package).
– Log in to your account using the EZVIZ app.
– On the Home screen, tap “+” on the upper-right corner to go to the Scan QR Code interface. – Scan the QR code on the Quick Start Guide cover or on the body of the camera.
– Follow the wizard to add the camera to the EZVIZ
app.
Installation
-
Install the Micro SD Card (Optional)
– Rotate the camera counterclockwise.
– Remove the cover on the camera.
– Insert the micro SD card (sold separately) into the card slot as shown in the figure below.
– Place the cover back on.
– In the EZVIZ app, tap the Storage Status
in the Device Settings interface to check the SD card status.
– If the memory card status displays as Uninitialized, tap to initialize it. The status will then change to Normal and it can store videos. -
Install the Camera
• Make sure the wall is strong enough to withstand three times the weight of the camera.
• The camera can be mounted on the wall, ceiling or pole.
Wall/Ceiling Mounting
– Place drill template onto the surface you have chosen to mount the camera.
– (For cement wall/ceiling only) Drill screw holes according to the template, and insert four anchors.
– Use four metal screws to fix the camera base.
Pole Mounting
Use the cable tie (not included in the package) to fix the camera base to the pole.
-
Install the Waterproof Kit (Optional)
If the camera is installed outdoors or in the humid environment, please use the waterproof kit.
– Insert the gasket into the Ethernet port of the camera. – Pass the A side of the Ethernet cable through the nut, the gasket and the endcap.
– Tighten up the nut and the
endcap.
–
Insert the A side into the Ethernet port of the camera and tighten up the nut.
– Connect the B side with the LAN port of the router or PoE switch.
For
detailed information, please refer to
www.ezviz.com/eu.
Initiatives on the Use of Video Products
Thank you for choosing EZVIZ products.
Technology affects every aspect of our life. As a high-tech company, we are
increasingly aware of the role technology plays in improving business
efficiency and quality of life, but at the same time, the potential harm of
its improper usage. For example, video products are capable of recording real,
complete and clear images.
This provides a high value in retrospect and preserving real-time facts.
However, it may also result in the infringement of a third party’s legitimate
rights and interests if improper distribution, use and/or processing of video
data takes place. With the philosophy of “Technology for the Good”, EZVIZ
requests that every end user of video technology and video products shall
comply with all the applicable laws and regulations, as well as ethical
customs, aiming to jointly create a better community.
Please read the following initiatives carefully:
-
Everyone has a reasonable expectation of privacy, and the installation of video products should not be in conflict with this reasonable expectation. Therefore, a warning notice shall be given in a reasonable and effective manner and clarify the monitoring range, when installing video products in public areas. For non-public areas, a third party’s rights and interests shall be evaluated when installing video products, including but not limited to, installing video products only after obtaining the consent of the stakeholders, and not installing highly-invisible video products.
-
The purpose of video products is to record real activities within a specific time and space and under specific conditions. Therefore, every user shall first reasonably define his/her own rights in such specific scope, in order to avoid infringing on a third party’s portraits, privacy or other legitimate rights.
-
During the use of video products, video image data derived from real scenes will continue to be generated, including a large amount of biological data (such as facial images), and the data could be further applied or reprocessed. Video products themselves could not distinguish good from bad regarding how to use the data based solely on the images captured by the video products. The result of data usage depends on the method and purpose of use of the data controllers. Therefore, data controllers shall not only comply with all the applicable laws and regulations and other normative requirements, but also respect international norms, social morality, good morals, common practices and other non-mandatory requirements, and respect individual privacy, portrait and other rights and interests.
-
The rights, values and other demands of various stakeholders should always be considered when processing video data that is continuously generated by video products. In this regard, product security and data security are extremely crucial.
Therefore, every end user and data controller, shall undertake all reasonable and necessary measures to ensure data security and avoid data leakage, improper disclosure and improper use, including but not limited to, setting up access control, selecting a suitable network environment (the Internet or Intranet) where video products are connected, establishing and constantly optimizing network security. -
Video products have made great contributions to the improvement of social security around the world, and we believe that these products will also play an active role in more aspects of social life. Any abuse of video products in violation of human rights or leading to criminal activities are contrary to the original intent of technological innovation and product development. Therefore, each user shall establish an evaluation and tracking mechanism of their product application to ensure that every product is used in a proper and reasonable manner and with good faith.
INFORMATION FOR PRIVATE HOUSEHOLDS
-
Separate collection of waste equipment: Electrical and electronic equipment that has become waste is referred to as waste equipment. Owners of waste equipment must dispose of it separately from unsorted municipal waste. In particular, waste equipment does not belong in household waste, but in special collection and return systems.
-
Batteries and rechargeable batteries as well as lamps: Owners of waste equipment shall, as a rule, separate waste batteries and rechargeable batteries that are not enclosed in the waste equipment, which can be removed from the waste equipment without being destroyed, from the waste equipment before handing them in at a collection point. This does not apply if waste equipment is prepared for reuse with the participation of a public waste management authority.
-
Options for returning waste equipment: Owners of waste equipment from private households can return it free of charge to the collection points of the public waste management authorities or to the take-back points set up by manufacturers or distributors within the meaning of the Electrical and Electronics Equipment Law.
Stores with a sales area of at least 400 m² for electrical and electronic equipment and those grocery stores with a total sales area of at least 800 m² that offer electrical and electronic equipment several times a year or on a permanent basis and make it available in the market are required to take it back. This also applies in the case of distribution using means of distance communication, if the storage and shipping areas for electrical and electronic equipment are at least 400 m² or the total storage and shipping areas are at least 800 m². Distributors shall, in principle, ensure take-back by providing suitable return facilities at a reasonable distance from the respective end user. The possibility of returning waste equipment free of charge exists for distributors who are obliged to take it back, among other things, if a new similar device that essentially fulfills the same functions is delivered to an end user. -
Privacy Notice: Waste equipment often contains sensitive personal data. This applies in particular to devices of information and telecommunications technology such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the waste equipment to be disposed of.
-
Meaning of the symbol “crossed-out wheelie bin”: The symbol of a crossed-out wheelie bin regularly depicted on electrical and electronic equipment indicates that the respective device is to be collected separately from unsorted municipal waste at the end of its service life.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>