DRAGINO TrackerD Open Source LoRaWAN Tracker Owner’s Manual
- June 12, 2024
- DRAGINO
Table of Contents
DRAGINO TrackerD Open Source LoRaWAN Tracker
Product Information
The TrackerD is an Open Source LoRaWAN Tracker that is based on the ESP32 MCU and Semtech LoRa Wireless Chip. It is equipped with various sensors including GPS, WiFi, BLE, Temperature, Humidity, Motion Detection, and Buzzer, making it suitable for a wide range of applications. The TrackerD is program friendly, allowing developers to customize its software using the Arduino IDE to fit their IoT solution.
The LoRa wireless technology used in the TrackerD enables long-range communication at low data rates. It provides ultra-long range spread spectrum communication, high interference immunity, and minimizes current consumption. This makes it ideal for professional tracking services.
The TrackerD comes with a 1000mAh Li-on rechargeable battery and has worldwide unique OTAA keys to join the LoRaWAN network. It features power monitoring, a charging circuit via USB port, a humidity/temperature sensor, and a built-in 3-axis accelerometer (LIS3DH). It also includes a tri-color LED, an alarm button, and supports regular/real-time GPS, BLE, and WiFi tracking.
Features
- ESP32 PICO D4
- Power Monitoring
- LoRaWAN 1.0.3 Class A
- SX1276/78 Wireless Chip
- Arduino IDE Compatible
- Motion sensing capability
- Tri-color LED, Alarm button
- 1000mA Li-on Battery power
- Charging circuit via USB port
- Humidity / temperature sensor
- Open source hardware / software
- Built-in3 axis accelerometer (LIS3DH ) Regular/ Real-time GPS,BLE,WIFI tracking
Dimension
- Size: 85 x 48 x 15 mm
- Net Weight: [Weight information not provided]
Applications
- Human tracking
- Logistics and Supply Chain Management
Specification
- Micro Controller:
- Espressif ESP32 PICO D4
- MCU: ESP32 PICO D4
- Bluetooth: Bluetooth V4.2 BR/EDR and Bluetooth LE
- WiFi : 802.11 b/g/n (802.11n up to 150 Mbps) Integrated SPI flash : 4 MB
- RAM: 448 KB
- EEPROM: 520 KB
- Clock Speed: 32Mhz
- Common DC Characteristics:
- Supply Voltage: 5V via USB port or Internal li-on battery
- Operating Temperature: -40 ~ 85°C
- ReHot Start: <1s
- Battery:
- 1000mA Li-on Battery power (for model TrackerD)
- Power Consumption:
- Sleeping Mode: 200uA
- LoRa Transmit Mode: 125mA @ 20dBm 44mA @ 14dBm
- Tracking: max: 38mA
Order Info: TrackerD-XX
- XXX: The default frequency band
XXX for valid frequency band,include: EU868,US915,AU915,AS923,EU433,IN865, KR920,CN470
Product Usage Instructions
- Charge the TrackerD using the USB port until the battery is fully charged.
- To turn on the TrackerD, press and hold the power button located on the device.
- Ensure that the TrackerD is within range of a LoRaWAN network.
- Use the Arduino IDE to customize the software of the TrackerD according to your specific IoT solution.
- If motion sensing capability is required, activate it using the appropriate settings in the software.
- To track GPS, BLE, or WiFi signals, configure the TrackerD accordingly in the software.
- If desired, utilize the tri-color LED and alarm button for visual and auditory indications.
- Monitor the power consumption and battery level using the power monitoring feature.
- If necessary, measure the temperature and humidity using the built-in sensor.
- For professional tracking services, utilize the ultra-long range spread spectrum communication and high interference immunity features of the TrackerD.
Dragino Technology Co., Limited
- Room 1101, City Invest Commercial Center, No.546 QingLinRoad LongCheng Street, LongGang District ; Shenzhen 518116,China
- Direct: +86 755 86610829
- Fax: +86 755 86647123
- WWW.DRAGINO.COM
- sales@dragino.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>