ihse 474-SNMPv3-R1 Draco vario SNMPv3 Add-on Module User Guide

: June 12, 2024
: ihse

Table of Contents

Scope of Delivery
System Setup
System Overview
Technical Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Draco vario SNMPv3 Module
Add-on Module
474-SNMPv3-R1
QUICK SETUP

Scope of Delivery

Package Contents
Please check if your package contains following items:

1x 474-SNMPv3-R1
Quick Setup

If anything is missing, please contact your dealer.

System Setup

The SNMPv3-R1 module can only be installed in specified slots of 6-slot or 21-slot chassis with internal backplane: BODY6 (slot 5), BODY21 (slot 21).
First-time users are recommended to set up the system in a test environment that is limited to a single room. This makes it easier to identify and solve any cabling problems, and experiment with your system more conveniently.

SNMPv3 Module Installation

Mount the SNMPv3 module in the specified slot of the chassis.
Connect the chassis containing the SNMPv3 module to the power supply.
Download the current version of the Draco tera Tool (see the following page).

Setting Advanced Configuration in the Draco tera Tool

Install the Draco tera Tool (see manual).
Connect the SNMPv3 module to the TCP/IP network it should be used with via network cable.
Start the tool and connect to the SNMPv3 module.
The default IP address is 192.168.100.99, the username is admin, and the password is admin.
Select System > Network > SNMP in the task area of the Draco tera Tool.
Configure the SNMPv3 module with the desired IP address and the parameters to be monitored and then restart the SNMPv3 module
After the advanced configuration of the system it is recommended to save the configuration under Remote Save…and then restart the SNMPv3 module by selecting Device > Advanced Service > Restart SNMP Board.
After changing the IP address, the new IP address is required to connect to the Draco tera Tool after restart.
Integrate the SNMPv3 module into your existing SNMP infrastructure by using the provided MIB file.
In case you do not have the MIB file available, please contact your distributor.

System Overview

Example 474-BODY21/4U

ihse 474 SNMPv3 R1 Draco vario SNMPv3 Add on Module -
fig1

1 474-SNMPv3-R1 module (slot 21)

Example 474-BODY6BP

ihse 474 SNMPv3 R1 Draco vario SNMPv3 Add on Module -
fig2

1 474-SNMPv3-R1 module (slot 5)

Technical Support

Prior to contacting support, please ensure you have read this manual, and then installed and set-up your device as recommended.
Support Checklist
To efficiently handle your request, it is necessary that you complete a support request checklist:
ihse.com/checklist

Please have the following information available before you call:

Company, name, phone number and e-mail address
Type and serial number of the device (see rear side of device)
Date and number of sales receipts, name of dealer if necessary
Issue date of the existing manual
Nature, circumstances, and duration of the problem
Involved components (such as graphic source/CPU, OS, graphic card, monitor, USB HID/USB 2.0 devices, interconnect cable) including manufacturer and model number
Results from any testing you have done

Shipping Checklist

To return your device, please contact your dealer to obtain an RMA number (Return-Material-Authorization).
Package your devices carefully, preferably using the original box. Add all pieces which you received originally.
Please note your RMA number visibly on your shipment.

Please understand that devices which are sent in without an RMA number cannot be accepted. The shipment will be sent back without being opened; postage unpaid.