YENKEE 45021094 Mechanical Hotswap Wireless RGB Keyboard User Guide
- June 13, 2024
- YENKEE
Table of Contents
YENKEE 45021094 Mechanical Hotswap Wireless RGB Keyboard
PRODUCT INFORMATION
- MODEL NO.: YENKEE 45021094
- MODEL NAME: Mechanical Hotswap Wireless RGB Keyboard
- Revision : 03/2023
INSTRUCTIONS
Keyboard connection
Wired
- Set the switch on the keyboard bottom to the right position marked TYP-C.
- Plug the included charging and data cable into the keyboard with the USB-C connector end and your computer with the USB-A end.
- Wait for the computer to automatically install the necessary drivers, and the system will inform you when the installation is complete.
- Now the keyboard is ready for use.
Bluetooth
- Set the switch on the keyboard bottom to the middle position marked with the Bluetooth logo. Now the LED marked BT on the top right of the keyboard will start flashing in blue.
- On the device you want the keyboard to connect to, open the Bluetooth device menu.
- The keyboard can pair up to three devices at the same time, but it is first necessary to pair the keyboard with the devices. The device can be switched using the keyboard shortcut Fn + 1/2/3. To set the keyboard in the pairing mode, hold down the Fn + 1/2/3 shortcut for 3 seconds and the blue LED will start flashing much faster.
- The keyboard is now visible on the device it is to be paired with. Successful pairing will be indicated by the LED lighting in solid blue and the keyboard backlighting being activated.
- The keyboard remembers the device. If you have Bluetooth enabled on the paired device, just press the appropriate shortcut again (Fn + 1/2/3] and the keyboard will automatically connect.
- If the keyboard is idle for 3 minutes, the backlight is deactivated to save battery power. When you press any key, the keyboard will regain the backlight.
If you do not use the keyboard for 10 minutes, a sleep mode is triggered that disconnects the keyboard from the active device. After pressing any button, the keyboard reconnects to the last device immediately.
2.4GHz
- Set the switch on the keyboard bottom to the left position marked 2.4G.
- The LED marked 2.4G on the top right of the keyboard will start flashing in blue.
- Remove the included USB receiver from the keyboard bottom and insert it into an available USB slot on your computer.
- Wait for the automatic connection to the receiver and the installation of the drivers, the system will notify you when it is complete.
- Now the keyboard is ready for use and the entire keyboard will light up to confirm a successful connection.
- If the keyboard is idle for 3 minutes, the backlight is deactivated to save battery power. When you press any key, the keyboard will regain the backlight. If you do not use the keyboard for 10 minutes, a sleep mode is triggered that disconnects the keyboard from the active device. After pressing any button, the keyboard reconnects to the last device immediately.
Charging
- If you use the keyboard in the wired mode, the keyboard is also being recharged, indicated by the space bar green backlighting. As soon as the keyboard is fully charged, the space bar backlighting will revert to its original color.
- If the battery is low, the space bar will be backlit in red, if the battery capacity drops below 10%, the entire backlighting will turn off to save the battery.
Keyboard shortcuts and functions
- FN + = Backlight effect direction adjustment
- FN + = Backlight color change
- FN + =Decrease the backlight brightness
- FN + = Increase the backlight brightness
- FN + Del: turning the backlighting on or off
- FN + Home: changing the backlight effect
The software for further keyboard settings is available to download at. Yankee.eu joined by its detailed user manual.
Specification
- Connection: Bluet□oth 5.0 / 2.4G / wired I
- Connector: USB-C
- Switch type: Gatern G Pro 2.0 Yellow [replaceable]
- Switch type: Linear
- Switch actuation force: 50 ±15gf
- Total switch path: 4.0mm
- Switch activation: 2,0 ±0, Bmm
- Switch lifetime: 80 million keystrokes
- Keys : 82
- Anti Ghosting: N-Key Rollover
- Backlight color: Full RGB 16.8 mil. colours
- Rated input: DC 5V; 350mA
- Max. transmitter power @ 2.4GHz – 2.4835GHz: 3.2mW
- Built-in battery : 4.DmAh [lithium]
- Operating time: up to 240 hours [without backlight)
- Charging time: 4 – 5 hours
- Dimensions: 330.7mm x 138.6mm x 41mm
- Cable length: 1. Bm (replaceable USB-C – supplied accessory)
- Material: ABS/metallic alloys
- Keyboard weight: 922g
System requirements:
- USB port
- Windows 7/8/10/11
Instructions and information regarding the disposal of used packaging materials Dispose of packaging material at a public waste disposal site.
Disposal of used electrical and electronic appliances
The meaning of the symbol on the product, its accessory, or packaging
indicates that this product shall not be treated as household waste. Please,
dispose of this product at your applicable collection point for the recycling
of electrical & electronic equipment waste. Alternatively in some states of
the European Union or other European states, you may return your products to
your local retailer when buying an equivalent new product. The correct
disposal of this product will help save valuable natural resources and help
prevent the potential negative impact on the environment and human health,
which could be caused as a result of improper liquidation of waste. Please ask
your local authorities or the nearest waste collection center for further
details. The improper disposal of this type of waste may fall subject to
national regulations for fines. ****
For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the
necessary information from your seller or supplier.
Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information
about the correct disposal method from local government departments or your
seller. This appliance complies with EU rules and regulations regarding
electromagnetic and electrical safety. ****
Changes to the text, design, and technical specifications may occur without prior notice and we reserve the right to make these changes. Hereby, FAST CR, a.s. declares that the radio equipment type YKB 30/31 complies with Directive 2014/53/ELJ. The full text of the EU Declaration of Conformity is available at the following internet address:www.yenkee.eu
Copyright 2023,
Revision 03/2023
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>