OMNIVISION OV2718 1080p full HD Product Brief User Guide

OMNIVISION OV2718 1080p full HD Product Brief

Product Information

• Product Name: OV2718
• Resolution: 1080p Full HD
• Product Brief: Best-In-Class Low-Light Sensitivity and 1080p High Definition Video for Mainstream Security Applications
• Manufacturer: OMNIVISION

Features:

• Native 16:9 high definition (HD) CameraChipTM sensor
• Best-in-class low-light sensitivity
• High dynamic range (HDR)
• Capable of recording 1080p HD video at 30 frames per second (fps) in HDR mode
• In-pixel HDR technology for exceptional image and video capture in high- and low-light environments
• Ideal camera solution for mainstream security and surveillance systems
• 6.5 x 5.7 mm chip scale package (CSP)

Applications:

• Mainstream security and surveillance systems

Ordering Information:
For ordering information, please visit www.ovt.com

Technical Specifications:

• Image Sensor Core: OV2718
• Image Signal Processor: Included
• Image Array: Included
• Temperature Sensor: Included
• Output Interface: FIFO MIPI/LVDS DVP
• Column ADC: 12-bit
• PLL: PLL 1 and PLL 2
• Timing Generator and System Control Logic: Included
• OTP: Included
• SCCB Interface: Included
• Version: 1.4, July 2023

Functional Block Diagram:

Contact Information:

• OMNIVISION Technologies, Inc.
• 4275 Burton Drive Santa Clara, CA 95054 USA
• Tel: +1 408 567 3000
• Fax: +1 408 567 3001
• Website: www.ovt.com

Note: OMNIVISION reserves the right to make changes to their products or to discontinue any product or service without further notice. OMNIVISION and the OMNIVISION logo are registered trademarks of OmniVision Technologies, Inc. OmniBSI and CameraChip are trademarks of OmniVision Technologies, Inc. All other
trademarks are the property of their respective owners.

Product Usage Instructions

1. Ensure that the OV2718 is properly connected to your security or surveillance system.
2. Power on the system and make sure all necessary power supply voltages (3.3V, 1.8V, 1.2V) are provided.
3. If required, configure the OV2718 using the available control interfaces such as SCCB or MIPI/LVDS DVP.
4. For optimal performance in different lighting conditions, adjust the analog gain control and digital gain settings as needed.
5. The OV2718 supports HDR mode, which enhances image and video quality in high- and low-light environments. Enable or disable HDR mode based on your requirements.
6. If desired, use the temperature sensor to monitor the operating temperature of the OV2718.
7. Retrieve the video output from the OV2718 through the appropriate output interface (FIFO MIPI/LVDS DVP).
8. Refer to the user manual or technical documentation of your security or surveillance system for further integration and usage instructions.

1080p full HD product brief
Best-In-Class Low-Light Sensitivity and 1080p High Definition Video for Mainstream Security Applications

• OMNIVISION’s OV2718 is a native 16:9 high definition (HD) CameraChip™ sensor that delivers best-in-class low-light sensitivity, high dynamic range (HDR), and 1080p HD video. These capabilities make the OV2718 an ideal camera solution for mainstream security and surveillance systems.
• Built on advanced 2.8-micron OmniBSI™-2 pixel architecture, the sensor can record 1080p HD video at 30 frames per second (fps) in HDR mode. The 1/2.9-inch OV2718 leverages
• OMNIVISION’s in-pixel HDR technology to capture exceptional images and video when recording in high- and low-light environments, a critical benefit for security and surveillance cameras.
• The OV2718 is available in a 6.5 x 5.7 mm chip scale package (CSP).
• Find out more at www.ovt.com.

Applications

• security and surveillance cameras
• video applications
• smart home

Product Features

• support for image size:
  • 1920 x 1080
  • VGA
  • QVGA, and any cropped size
• high dynamic range
• high sensitivity
• low power consumption
• image sensor processor functions:
  • lens correction
  • defective pixel cancelation
  • automatic black level correction
• supported output formats: RAW
• horizontal and vertical sub-sampling
• SCCB for register programming
• high speed serial data transfer with MIPI CSI-2/LVDS
• parallel 12-bit DVP output
• external frame synchronization capability
• one time programmable (OTP) memory

Ordering Information

• OV02718-H77A-2B (color, lead-free) 77-pin CSP
• OV02718-H77A-PE (color, lead-free) 77-pin CSP packed in tray with protective film

Technical Specifications

• active array size: 1920 x 1080
• maximum image transfer rate:
  • 30 fps full resolution HDR
  • 30 fps full resolution linear
• power supply:
  • analog: 3.14 ~ 3.47V
  • digital: 1.2 ~ 1.4V
  • DOVDD: 1.7 ~ 1.9V
  • AVDD: 1.7 ~ 1.9V
• power requirements:
  • active: 350 mW
  • software standby: 1.14 mW
• temperature range:
  • operating: -30°C to +85°C junction temperature
  • stable: 0°C to +60°C junction temperature
• output interfaces: up to 4-lane MIPI CSI-2/LVDS, 12-bit DVP
• lens size: 1/2.9″
• lens chief ray angle: 9°
• output formats: linear – 12-bit RAW; HDR – 2×12-bit DCG RAW, 16-bit combined DCG, 12-bit compressed combined DCG
• scan mode: progressive
• pixel size: 2.8 µm x 2.8 µm
• image area: 5482.35 µm x 3202 µm

Functional Block Diagram

4275 Burton Drive Santa Clara, CA 95054 USA

• Tel: + 1 408 567 3000
• Fax: + 1 408 567 3001 www.ovt.com

OMNIVISION reserves the right to make changes to their products or to discontinue any product or service without further notice. OMNIVISION and the OMNIVISION logo are registered trademarks of OmniVision Technologies, Inc. OmniBSI and CameraChip are trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>