OMNIVISION OV50E 50MP Image Sensor User Guide
- June 4, 2024
- OMNIVISION
Table of Contents
OMNIVISION OV50E 50MP Image Sensor
Introduction
The OV50E image sensor brings the industry’s best low light image and high
dynamic range (HDR) video capturing capabilities to rear-facing main cameras
in high-end and mainstream smartphones. The OV50E features staggered HDR and
DCG™ technology for improved HDR and crop zoom support, 100% quad phase
detection (QPD) for enhanced autofocus, and better low light performance over
previous- generation image sensors. The new OV50E combines 50MP resolution and
1.0 µm pixel size in a 1/1.5-inch optical format.
The OV50E can achieve up to 64x analog gain for full resolution, or 256x
analog gain for 4 cell binning resolution. Built on OMNIVISION’s
PureCel®Plus-S stacked die technology, the OV50E can also use near-pixel
binning to output a 12.5MP image or 4K2K video with four times the
sensitivity, yielding 2.0 µm-equivalent performance for preview and video. The
maximum dynamic range reaches more than 100 dB.
The OV50E’s second-generation QPD enables 2×2 phase detection autofocus across
the sensor’s entire image array for 100% coverage, resulting in improved
distance calculation, faster autofocus and better low-light performance.
Premium image quality is further enabled by the combination of on-chip
remosaic for the QPD color filter array to full Bayer resolution.
Output formats include 50MP, or 8K video, with QPD autofocus at 30 frames per
second (fps); 12.5MP with QPD autofocus at 60 fps; 4K2K video with QPD
autofocus at 60 fps; and 1080p at 240 fps. The OV50E supports the CPHY/DPHY
MIPI interface and dual DOVDD 1.8/1.2V.
Find out more at www.ovt.com.
Applications
- smart phones
- video conferencing
- PC multimedia
Technical Specifications
-
active array size: 8224 x 6176
-
maximum image transfer rate:
- 8192 x 6144: 30 fps
-
power supply:
- core: 1.1V
- analog: 2.8V
- I/O: 1.8V/1.2V
-
power requirements:
- active: TBD (50MP @ 24 fps)
- XSHUTDOWN: <10 µA
-
output formats:
10/12/14-bit RGB RAW -
temperature range:
- operating: -30°C to +85°C junction temperature
- stable: 0°C to +60°C junction temperature
-
lens size: 1/1.55″
-
lens chief ray angle: 36.75° non-linear
-
scan mode: progressive
-
pixel size: 1.008 µm x 1.008 µm
-
image area:
8289.792 µm x 6225.408 µm
Product Features
-
automatic black level calibration (ABLC)
-
programmable controls for:
- frame rate
- mirror and flip
- binning
- cropping
- windowing
-
support for dynamic DPC
-
supports output formats:
- 10-bit RGB RAW
- 12/14-bit RGB RAW
after DCG combination
-
supports horizontal and
vertical subsampling -
supports typical images sizes:
- 8192 x 6144
- 4096 x 3072
- 4096 x 2304
- 1920 x 1080
- 1280 x 720
-
standard serial SCCB interface
-
up to 4-lane MIPI TX interface with speeds up to 3.0 Gbps/lane
-
2/3 trio C-PHY interface,
up to 3.5 Gsps/trio -
supports type 2 QPD PDAF
-
HDR support:
- DCG RAW or combined RAW
- stagger HDR 2/3 exposure timing
- DCG RAW or DCG combined
RAW + VS RAW
-
on-chip QPD to Bayer converter
-
three on-chip phase lock loops (PLLs)
-
programmable I/O drive capability
-
built-in temperature sensor
-
1.008 µm pixel
Functional Block Diagram
4275 Burton Drive Santa Clara, CA 95054 USA
Tel: + 1 408 567 3000 Fax: + 1 408 567 3001 www.ovt.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>