STAIRVILLE DMX Joker V2 512 SLIM Standalone Interface User Guide

June 12, 2024
STAIRVILLE

STAIRVILLE DMX Joker V2 512 SLIM Standalone Interface

STAIRVILLE-.DMX-Joker-V2-512-SLIM-Standalone-Interface-
product

Product Information

The DMX Joker V2 512 SLIM is a lighting control device designed for controlling lighting devices and effects via a computer using appropriate software. It features various operating elements and connections, including trigger buttons, mode selection button, LED display, USB hub, DMX input/output, and more. The device supports multiple DMX modes, stand-alone options, and has a master/slave mode for synchronizing multiple devices. It also offers real-time clock and calendar functionality, adjustable timer settings, and scene recovery after power cut-off.

The hardware features of the DMX Joker V2 512 SLIM include DMX output, inputs and outputs, maximum connected interfaces, zone (stand-alone) support, memory capabilities, and a USB-C port for power supply. The device is housed in an ASB plastic casing, weighs 200g, and has a degree of protection of IP40. It is compatible with various systems and has system requirements for PC usage.

The product comes with safety instructions that highlight the intended use of the device and warn against improper use. It alsoprovides safety advice regarding the disposal of plastic bags and packaging to prevent choking hazards for children. The manual emphasizes the importance of reading and following the safety advice and instructions given.

Product Usage Instructions

1. Connect the DMX Joker V2 512 SLIM to your computer using theUSB hub.

2. Ensure that the device is properly powered by connecting it to a DC power source within the voltage range of 9-36V.

3. Familiarize yourself with the operating elements and connections of the device:

  • – Trigger buttons (1-8): Press the corresponding button to play or stop a scene from memory.
  • – Mode selection button: Use this button to select the desiredmode (trigger, page, colour, speed, dimmer, zone, function).
  • – Confirmation button: Press this button to confirm an entry or turn off the colour.
  • – Value adjustment buttons: Use these buttons to increase or decrease the values.
  • – 7-segment LED display: Displays relevant information.
  • – DMX input/output: Connect the device to DMX lighting equipment.

4. Depending on your requirements, set the device to the desired mode using the mode selection button.

5. Use the trigger buttons to play or stop scenes from memory.

6. Adjust values such as speed, dimmer, and zone directly on the device using the value adjustment buttons if necessary.

7. Take advantage of the various features and options offered bythe device, such as adjustable timer settings, scene recovery after power cut-off, and cross fade time between scenes.

8. If using multiple DMX Joker V2 512 SLIM devices, you can synchronize them in master/slave mode for combined operation.

9. Refer to the user manual for further instructions on using specific features and functionalities of the device.

Safety instructions

Intended use
This device is intended to control lighting devices and effects via computer using appropriate software. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.

Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts from the product. They could swallow the pieces and choke!

Where to use the product
Never use the product

  • in direct sunlight
  • in conditions of extreme temperature or humidity
  • in extremely dusty or dirty areas
  • at locations where the unit can become wet
  • near magnetic fields

General handling

  • To prevent damage, never use force when handling the product.
  • Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents.

Features

  • Interface for Stairville DMX Joker, DMX Joker Pro, and DMX Joker V2
  • 512 channels
  • Ideal for all indoor installations and projects
  • Easily mounting on walls and any surface
  • Connections are inside the housing
  • Show can be played without computer
  • Scenes can be triggered with time and calendar setting
  • Cross fade time between scenes
  • Automatic scene recovery after power cut-off
  • 6 selectable modes
  • Master/slave mode with up to 32 combined and synchronised devices (64 universes)
  • 16-bit fine channel management
  • Speed, scene, dimmer and zone setting directly on the device
  • Integrated clock and calendar

Operating elements and connections

STAIRVILLE-.DMX-Joker-V2-512-SLIM-
Standalone-Interface-fig 1

  1. Trigger buttons 1 – 8 | Press the corresponding button to play or stop a scene from memory.

  2. Button to select the mode (trigger, page, colour, speed, dimmer, zone, function)

  3. Button to confirm the entry / colour off

  4. Button to decrease the values

  5. Button to increase the values

  6. 7-segment LED display

  7. DC 9-36V In

  8. GND

  9. TRIG A

  10. TRIG B

  11. TRIG C

  12. TRIG D

  13. TRIG E

  14. M/S DATA

  15. M/S CLK

  16. DC 5V Out

  17. GND

  18. IR+

  19. LIGHT+

  20. DMX 2-

  21. DMX 2+

  22. DMX GND

  23. DMX 1-

  24. DMX 1+

Hardware Features

  • DMX output 512 input/output channels PC and Stand Alone, factory defaults: 2 × 512 splitter mode
  • Inputs and outputs USB-C, Mini-USB 2.0
  • screw terminal block (2 × 9 pins)
  • Max. connected interfaces 12 via USB = 12 DMX
  • Zone (Stand Alone) 1, play 1 scene/sequence at a time
  • Memory Micro-SD card (all FAT formats, up to 256 GB) Internal memory (requires no SD card)
  • DMX modes DMX In/Out (PC), DMX Splitter, DMX Merge, DMX Record
  • Stand-Alone options 6 selectable modes: buttons (8), pages (10), zones (5), colours (99 RGB, 8 RGBW)
  • Speed, scene, dimmer and zone setting directly on the device
  • Adjustable timer setting
  • 16-bit fine channel management
  • Automatic scene recovery after power cut-off
  • Cross fade time between scenes
  • Display turns off after 4 s, default start scene, dimmer, and RGB colour selection
  • Master/slave mode with up to 32 combined and synchronised devices (64 universes)
  • Trigger (Stand Alone) 8 buttons with blue indicator LED, 10 pages
  • Real time clock and calendar for each scene (hour, day, week, month, year)
  • 5 dry contacts at 3~5 V (On, On/Off, Release, Restart, Scene Priority, max. 31 contacts)
  • Infrared remote control, light intensity (PCB and optional remote control)
  • Operating voltage USB-C 5 V / 0.2 A
  • Screw terminal block 5 – 24 V / 0.2 A / 0.2 W, high voltage protection
  • Degree of protection IP40
  • Dimensions (W × H × D) 97 mm × 166 mm × 38 mm
  • Housing ASB plastic in black or white
  • Weight 200 g
  • Ambient conditions Temperature range 0 °C…40 °C
  • Relative humidity 20 %…80 % (non-condensing)

Software Features

  • DMX Joker up to 64 x 512 DMX outputs
  • DMX Joker Pro 30 minutes audio and video timeline synchronisation
  • STUDIO DMX 3D viewer in real time (full mode)
  • ArtNet-Ausgang vom PC 1 × 512 DMX outputs per connected device
  • System compatibility Windows®, iOS®, Linux®
  • System requirements PC Windows®, Mac OS®, Linux® (device) 2 GHz CPU, 8 GB RAM, 2 GB RAM graphic card, 500 MB disk, 1 × USB port (device), 1 × Ethernet connector (for ArtNet and sACN)

For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose of your old device with your normal household waste. Dispose of this product through an approved waste disposal firm or through your local waste facility. Comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.deinfo@thomann.de

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals