ARB 3580020 Jack Mounting Bracket Instructions

: June 12, 2024
: ARB

Table of Contents

ARB 3580020 Jack Mounting Bracket Instructions
GENERAL CARE AND MAINTENANCE
FITTING PROCEDURE
USER INFORMATION
- References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ARB 3580020 Jack Mounting Bracket Instructions

ARB 3580020 Jack Mounting Bracket.jpg

Part Number: 3580020
Product Description: JACK MOUNTING BRACKET
Suited to vehicle/s: FORD BRONCO

WARNING

ALSO, NOTE THE FOLLOWING:

This product must be installed exactly as per these instructions using only the hardware supplied.
In the event of damage to any mount component, contact your nearest authorised ARB stockist.
Do not use this product for any vehicle make or model, other than those specified by ARB.
This product or its fixing must not be modified in any way.
The installation of this product may require the use of specialized tools and/or techniques.
It is recommended that this product is only installed by trained personnel.
These instructions are correct as at the publication date. ARB Corporation Ltd. cannot be held responsible for the impact of any changes subsequently made by the vehicle manufacturer.
During installation, it is the duty of the installer to check correct operation/clearances of all components.
Work safely at all times.
Unless otherwise instructed, tighten fasteners to specified torque.

ARB 4×4 ACCESSORIES
Corporate Head Office

42-44 Garden St Tel: +61 (3) 9761 6622
Kilsyth, Victoria Fax: +61 (3) 9761 6807
AUSTRALIA 3137

Australian enquiries: sales@arb.com.au
North & South American enquiries: sales@arbusa.com
Other international enquiries: exports@arb.com.au

www.arb.com.au

GENERAL CARE AND MAINTENANCE

By choosing an ARB Accessory, you have bought a product that is one of the most sought after 4WD products in the world. Your Accessory is properly engineered, it’s reliable and is a quality accessory that represents excellent value. To keep your Accessory in original condition it is important to care and maintain it following these recommendations:

As part of any Pre Trip Preparation, or on an annual basis, it is recommended that a thorough visual inspection of the vehicle’s accessories is carried out, making sure that all bolts and other components are torqued to the correct specification. Also check that all wiring sheaths, connectors, and fittings are free of damage. Replace any components as necessary. This service can be performed by your local authorized ARB Stockist.

FIG 1 FITTING REQUIREMENTS.JPG

NOTE: ‘WARNING’ notes in the fitting procedure relate to OHS situations, where to avoid a potentially hazardous situation it is suggested that protective safety gear be worn or a safe work procedure be employed. If these notes and warnings are not heeded, injury may result.

FIG 3 FITTING REQUIREMENTS.JPG