DATALOGIC JOYA Touch 3 Slot Cradle Owner’s Manual

3-Slot Cradle

www.datalogic.com

JOYA Touch 3 Slot Cradle

Safety & Regulatory Addendum

http://www.datalogic.com/

This document is an addendum to the Quick Start Guide (QSG) for this product. See the QSG for additional product information.

©2023 Datalogic S.p.A. and/or its affiliates. All rights reserved. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U.

Read carefully the Joya Touch 3-Slot Cradle Installation Guide (available at www.datalogic.com) before performing any type of connection to the Joya Touch 3-Slot Cradle.
The user is responsible for any damage caused by incorrect use of the equipment or by inobservance of the indication supplied in the user manual.

General Safety Rules

• Before using the Joya Touch 3-Slot Cradle, read this Addendum carefully.

• Before using the Joya Touch devices and the battery packs, read also the Joya
  Touch Safety & Regulatory Addendum.

• Use only the components and accessories supplied by the manufacturer for the specific Joya Touch being used.

• Do not attempt to disassemble the Joya Touch 3-Slot Cradle, as it does not contain parts that can be repaired by the user. Any tampering will invalidate the warranty.

• Do not submerge the Joya Touch 3-Slot Cradle in liquid products.

• For further information or support, refer to the Datalogic web site: www.datalogic.com.

Do not put any foreign object such as, but not limited to, coins, paper clips, stickers inside the slot of the dock (see the examples below).

The Joya Touch gets warm during charging; this is normal and does not mean a malfunction.

Power Supply

The device is intended to be supplied by a UL Listed/CSA Certified Power Unit LPS/SELV rating 12V, min 5A power source which supplies power via the power connector of the cable.
Any changes or modifications to equipment, not expressly approved by Data logic could void the user’s authority to operate the equipment.

Wireless and Radio Frequencies Warnings

Cradle is able to provide Wireless Power to 3 Joya Touch devices, when correctly inserted into the corresponding slots.
Do not attempt to charge any other device different from Joya Touch devices.
Make sure there’s nothing between charger and the device.
Do not insert nor attach anything, such as stickers, inside the cradle slots.
Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications or attachments could damage the product and may violate laws and regulations.
Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals generated by Joya Touch.
Datalogic recommends persons with pacemakers or other medical devices to follow the same recommendations provided by Health Industry Manufacturers Associations for mobile phones.
Persons with pacemakers should ALWAYS keep this device more than twenty five (25) cm from their pacemaker and/or any other medical device.
Do not install the cradle in any area with a potentially explosive atmosphere. Observe restrictions and follow closely any laws, regulations, warnings and best practices on the use of radio equipment near fuel storage areas or fuel distribution areas, chemical plants or where any operation involves use of explosive materials.
Do not store or carry flammable liquids, explosive gases or materials with the device or its parts or accessories.
Areas with a potentially explosive atmosphere are often, but not always, clearly marked or shown.
Sparks in such areas could cause an explosion or fire, resulting in injury or even death.

European Declaration of Compliance

Hereby, Datalogic S.r.l. declares that this radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at:  www.datalogic.com.
Select the Support & Service > Downloads > Product Certifications link where you can search for your specific product certification.

UKCA Declaration of Conformity

Hereby, Datalogic S.r.l. declares that the full text of the UKCA Declaration of Conformity is available at: www.datalogic.com. Select the Support & Service

Downloads > Product
Certifications link where you can search for your specific product certification.

Information for the User

Contact the competent authority responsible for the management of radio frequency devices of your country to verify any possible restrictions or licenses required.

FCC/IC Labeling

FCC Compliance

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTICE:
Changes or modifications made to this equipment not expressly approved by Datalogic S.r.l. may void the FCC authorization to operate this equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 Subpart C of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and any other radio device.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

ISED Compliance

NOTICE:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Exposure to Radio Frequency Radiation

1. To comply with the Canadian RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
2. To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 10 cm must be maintained between the antenna of this device and all persons.

Datalogic S.r.l.
Via San Vitalino 13
40012 Calderara di Reno (BO)
Italy
Tel. +39 051 3147011
Fax +39 051 3147205

©2023 Datalogic S.p.A. and/or its affiliates
• All rights reserved. • Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in
any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates. Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser’s own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either be downloadable from the Datalogic website (www.datalogic.com) or provided on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the “Contact Datalogic” page.

Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. The Joya logo is a trademark of Datalogic S.p.A. and/or its affiliates, registered in the U.S. and the E.U. All other trademarks and brands are property of their respective owners.

Patents
See www.patents.datalogic.com for patent list.
This product is covered by one or more of the following patents:
Design patents: EP002805218, USD833451, ZL201630098149.8
Utility patents: US7620475.

Cleaning The Cradle

Periodically clean the Joya Touch 3-Slot Cradle using a soft cloth slightly dampened with only water or Isopropyl Alcohol (70%).
Do not use any other cleaning agents (e.g. different alcohol, abrasive or corrosive products, solvents) or abrasive pads to clean the cradle.
Do not spray or pour liquids directly onto the cradle.
The cradle is not water resistant. Keep it dry.

WEEE Statement

Waste Electrical and Electronic Equipment (WEEE) Statement
For information about the disposal of Waste Electrical and Electronic Equipment (WEEE), please refer to the website at www.datalogic.com.

References

• Datalogic | Automatic Data Capture and Industrial Automation - Datalogic
• Datalogic | Automatic Data Capture and Industrial Automation - Datalogic
• Patents - Datalogic

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>